| |
Output: 7 lux at 100m.
Dimensions: 185mm long, 180mm wide, 210mm high
Fuse Size: 10 amp
Weight: 2.22 Kgs
Features
• Sealed-beam halogen lamp
• Controlled from helm station
• 320° ho... »more
info
|
Output: 7 lux at 100m.
Dimensions: 203mm long, 162mm wide, 200mm high
Fuse Size: 10 amp
Weight: 2.74 Kgs
Features
• Sealed-beam halogen lamp
• Controlled from helm station
• 320° h... »more
info
|
Jabsco 'Twist n' Lock' replacement Toilet Pump assembly complete 29040-3000
The brand new 'Twist n' Lock' pump design can now be used on previous Jabsco manual toilets.
This converts previous Ja... »more
info
|
2ltr accumulator tank with steel case and rubber membrane. Ideal for installations where a larger vessel will not fit.
Connection: 1/2"BSP to suit either flexible or semi rigid
Size: H230xDia.125mm... »more
info
|
8ltr accumulator with steel case and rubber membrane. The accumulator can be mounted at any angle and is ideal for larger water systems.
Connection: 3/4" BSP
Size: H330xDia.205mm
Also requires hose... »more
info
|
Output: nominal 1 litre, working capacity up to approximately 0.5 litres
Connections: 13mm (½”) bore hose or threaded ports
Dimensions: 340mm long, 120mm wide, 110mm deep
Weight: 800 gms
Pla... »more
info
|
• For bright, clean, fresh tasting drinking water
• Removes tastes and odours including chlorine
• Easy cartridge replacement after a season's use - no need to disturb pipework
• Internal ... »more
info
|
CW322
Accumulator Tank Fitting Kit - ½" BSP
Connections: - 2 brass hose connectors, 1 threaded T-connector
For easy connection into pressure systems assembled with flexible hose
For use with CW26... »more
info
|
CW323
Accumulator Tank Fitting Kit - ¾" BSP
Connections: - 2 brass hose connectors, 1 threaded T-connector and two ½" - ¾" brass adaptors
For easy connection into pressure systems assembled with f... »more
info
|
CW324
Accumulator Tank Bracket Kit
Fit 2 litre, 5 litre and 8 litre tanks
Actual Weight: 0.20 Kg (Approx. 0.40 Kg packed)
... »more
info
|
• PRESSURE SWITCH - cuts in at 1bar (15psi) - cuts out at 1.7bar (25psi)
• Pre-assembled and tested for quick and simple installation in small/medium sized boats: serves up to 3 outlets
• 3 sc... »more
info
|
• Materials of Construction, Tank: copper, Insulation: polyurethane
• Maximum Working Pressure up to 3 bar (44 p.s.i.)
• 1.25kW 230 volt a.c. immersion heater with long lasting 'Incoloy' sheat... »more
info
|
• Materials of Construction, Tank: copper, Insulation: polyurethane • Maximum Working Pressure up to 3 bar (44 p.s.i.)
• 1.25kW 230 volt a.c. immersion heater with long lasting 'Incoloy' sheath ... »more
info
|
• Materials of Construction, Tank: copper, Insulation: polyurethane
• Maximum Working Pressure up to 3 bar (44 p.s.i.)
• 1.25kW 230 volt a.c. immersion heater with long lasting 'Incoloy' sheat... »more
info
|
• Materials of Construction, Tank: copper, Insulation: polyurethane
• Maximum Working Pressure up to 3 bar (44 p.s.i.)
• 1.25kW 230 volt a.c. immersion heater with long lasting 'Incoloy' shea... »more
info
|
You may install JABSCO Deluxe Flush electricallyoperated marine toilets in both power and sailingcraft, either above or below the waterline, for use onsea, river, lake or canal.
Space saving styli... »more
info
|
Save £225.00 on this Jabsco Electric Toilet.
The Original Jabsco economy electric toilets, available in 12Volt or 24Volt, compact or regular bowl.
Features Include:
Flushing pump that can self-prim... »more
info
|
We stock a selection of the most popular Jabsco flexible pump impeller kits.
Contains Jabsco impeller & gasket... »more
info
|
• Tough, compact, lightweight holding tank for small yachts and motor cruisers
• Ready to install, with inlet, discharge & vent hose connections, internal suction hose and securing straps
• Co... »more
info
|
A NEW Jabsco Electric Toilet designed to instantly retro-fit your existing manual toilet or to give your bathroom a modern stylish look. The innovative toilet design from Jabsco offers both low power ... »more
info
|