| |
All Vetus electric bow thrusters are fitted with a specially-designed 6-bladed propeller, which optimises efficiency and increases thrust. The blade profile allows the propeller to achieve virtually n... »more
info
|
All Vetus electric bow thrusters are fitted with a specially-designed 6-bladed propeller, which optimises efficiency and increases thrust. The blade profile allows the propeller to achieve virtually n... »more
info
|
All Vetus electric bow thrusters are fitted with a specially-designed 6-bladed propeller, which optimises efficiency and increases thrust. The blade profile allows the propeller to achieve virtually n... »more
info
|
All Vetus electric bow thrusters are fitted with a specially-designed 6-bladed propeller, which optimises efficiency and increases thrust. The blade profile allows the propeller to achieve virtually n... »more
info
|
Vetus bow thruster tunnels are available available in glassfibre reinforced polyester, steel or aluminium, in lengths of 0.75m, 1m, 1.5m, 2m & 3m. Outer diameters vary depending on material, but are u... »more
info
|
This joystick panel is suitable for controlling one bow thruster or stern thruster.
It is available in two versions, one without; and one with a time lapse device.... »more
info
|
Panel connection cable for bow thrusters, fitted with multi-plugs. Available in 6m, 10m, 16m, 18m or 20m lengths.... »more
info
|
Fuse holder suplied with a protective cover. For use with Vetus ZE fuses.
... »more
info
|
Vetus Slow-blow fuses, encapsulated in glass so as to prevent fire. Suitable for bow thrusters, windlasses etc..
Fuse sizes available: 40A, 50A, 63A, 80A, 100A, 125A, 160A, 200A, 250A, 300A, 355A,... »more
info
|
To compliment the well known and proven range of LP waterlocks, VETUS has now introduced several new models, type NLP, made of injection-moulded plastic materials. These have the benefits of being dur... »more
info
|
This platic goose neck prevents seawater from entering into the engine via the transom connection. ... »more
info
|
AIR VENT
Air vent suitable for hoses of Ø 1/2", 3/4", 1" and 1-1/4" I.D.
Material of housing: synthetic.
If the injection point of the cooling water line is situated at a height less than 6" above... »more
info
|
Vetus TYPE K engine mounts
For smaller engines, up to
appr. 60 kW (8O HP).
Priced and Sold indivdually.
The torque of an engine is one of the deciding factors for determination of the load a... »more
info
|
TRANSOM EXHAUST CONNECTIONS
WITH CHECK VALVE (SYNTHETIC)
Ø 40 - 90 MM.
The exhaust hose can be fitted
directly to this transom connection... »more
info
|
Watertight when closed, they have a mosquito net and plastic finishing ring.
Available in 3 sizes:
D'Artagnan: 183mm ext.size x 147mm cutout
Athos: 150mm ext.size x 122mm cutout
Portos: 115mm ex... »more
info
|
Each waste water tank requires an air breather line, through which upleasant odours may escape. This can be prevented by the installation of a vetus no-Smell filter into the breather line. The no-Smel... »more
info
|
The WS180 is suitable for petrol & diesel.
Connections:M14 x 1.5 female thread
Capacity:180L/Hour
Weight: 0.7kg
Size: H207 x D85mm... »more
info
|