| |
Specifically formulated and developed to meet the needs of:
High-output sterndrive and inboard engines.
Multi-viscosity 25W-40 oil formulated to eliminate thermal breakdown (no viscosity improve...» more
info
|
Specifically formulated and developed to meet the needs of:
All 4-stroke outboard engines.
Developed for the rigors of the marine environment.
Field-proven to provide superior lubrication as w...» more
info
|
Specifically formulated with a marine additive package to meet the needs of:
Low-to mid-horsepower outboard engines, under general marine operating conditions.
Exceeds TC-W3 standards.
Reduces...» more
info
|
Heavy duty electric oil changer to suck used oil from the engine. Discharges at 1ltr/min and is supplied with 2 sizes of suction tube, including stiff pipe and crocodile clips.
Ensure engine has been...» more
info
|
Specifically designed for the maine environment with excellent water resistant qualities.
Suitable for sterntubes, wheel bearings and engine linkages....» more
info
|
Brass oil sump pump for extracting engine oil from inboard engines. Simply run the engine for a short time to heat the oil, then turn off engine and insert the longer of the nylon tubes in to the engi...» more
info
|
Brass lubricator for stern tubes, rudder bearings etc.
Bulkhead or floor mounted. Capacity: 150ml (5fl oz.).
Dimensions:
Base width 80mm (31⁄8")
Projection 70mm (23⁄4")
Base height 27mm (1")
O...» more
info
|
Specifically formulated with a higher concentration marine additive package to meet the needs of:
High-horsepower outboard including direct fuel-injected engines in extreme marine operating condit...» more
info
|
“Stauffors” type grease cups in hot
stamped brass.
Male Dia.OA Max Height
BSP
1⁄8" 18mm 29mm
1⁄8" 33mm 40mm
1⁄4" 33mm 40mm
1⁄4" 40mm 42mm ...» more
info
|
A synthetic blend 2-Cycle engine oil specifically formulated and developed to meet the needs of:
OptiMax and Direct Fuel Injected (DFI) 2-cycle outboard engines.
Provides the maximum protection...» more
info
|
Specifically formulated and developed to meet the needs of all marine
diesel engines.
• 15W-40 oil formulated to combat sludge and varnish formation.
• Contains a higher additive level than standar...» more
info
|
Specifi cally designed and developed to meet the needs of outboard
lower units.
• Provides excellent lubrication and wear resistance for outboard
lower unit gears.
• Great for both high and low ho...» more
info
|
Engineered to provide maximum protection for sterndrive and
outboard lower units.
• Exclusive formula provides extended gear life in extreme conditions
including high-speed and high horsepower appl...» more
info
|
Quicksilver storage seal fogging oil is a blend of corrosion inhibiting additives designed to coat engine components during engine storage and reduce the formation of surface rust....» more
info
|
|
|
PL-14K PELA Pro 14 Oil Extractor
We are pleased to finally offer a heavy duty unit for big engines. With a 14 litre capacity, the PELA Pro 14 is the largest on the market. It comes with a new impro...» more
info
|
A very clever vacuum pump which can be used to change oil with no fuss or mess on boats, cars, motorbikes & anything that has an engine. Between 10 to 20 strokes of the pump creates a powerful vacuum,...» more
info
|
This water and heat resistant formulation provides you with a long-lasting, heavy-duty grease in an aerosol can. 3-IN-ONE Professional White Lithium Grease spray reduces friction while protecting agai...» more
info
|
Fast-acting formula penetrates rust, grease and grime
The fast-acting formula of 3-IN-ONE Professional High-Performance Penetrant loosens rusted or stuck parts, and works to remove grease and grime...» more
info
|
Quick-drying no-mess high-performance lubrication and corrosion protection
3-IN-ONE Professional Silicone Spray Lubricant provides high-performance lubrication and corrosion protection, in a quick-...» more
info
|