Engine Room & Exhaust

Sort By:
  • display as grid Grid
  • display as list List
View: 24 | 48 | 96 | ALL
Page: 1 | 2 |
Inline Plastic Diesel Filter 6/8mm Hose
Inline Plastic Diesel Filter 6/8mm Hose
PLASTIC INLINE DIESEL FILTER 2000cc MAX 6/8mm HOSE
£3.50 inc VAT
Water Lubricated Shaft Cutlass Bearing 3/4 x 1-1/4 x 3
Water Lubricated Shaft Cutlass Bearing 3/4 x 1-1/4 x 3
Countrose shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£38.50 inc VAT
Water Lubricated Shaft Cutlass Bearing 1 x 1-3/8 x 4
Water Lubricated Shaft Cutlass Bearing 1 x 1-3/8 x 4
Countrose shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£53.50 inc VAT
 
Water Lubricated Shaft Cutlass Bearing 1 x 1-1/2 x 4
Water Lubricated Shaft Cutlass Bearing 1 x 1-1/2 x 4
Countrose shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£43.80 inc VAT
Water Lubricated Shaft Cutlass Bearing 1-1/8 x 1-3/4 x 4-1/2
Water Lubricated Shaft Cutlass Bearing 1-1/8 x 1-3/4 x 4-1/2
Countrose shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£59.50 inc VAT
Water Lubricated Shaft Cutlass Bearing 1-1/4 x 1-3/4 x 5
Water Lubricated Shaft Cutlass Bearing 1-1/4 x 1-3/4 x 5
Countrose shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£53.50 inc VAT
 
Water Lubricated Shaft Cutlass Bearing 1-1/2 x 2 x 6
Water Lubricated Shaft Cutlass Bearing 1-1/2 x 2 x 6
Countrose shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£59.90 inc VAT
Water Lubricated Shaft Cutlass Bearing 20mm x 35mm x 80mm
Water Lubricated Shaft Cutlass Bearing 20mm x 35mm x 80mm
Countrose shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£48.40 inc VAT
Water Lubricated Shaft Cutlass Bearing 22mm x 35mm x 88mm
Water Lubricated Shaft Cutlass Bearing 22mm x 35mm x 88mm
Countrose shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£46.75 inc VAT
 
Water Lubricated Shaft Cutlass Bearing 25mm x 40mm x 100mm
Water Lubricated Shaft Cutlass Bearing 25mm x 40mm x 100mm
Countrose shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£44.70 inc VAT
Water Lubricated Shaft Cutlass Bearing 30mm x 45mm x 120mm
Water Lubricated Shaft Cutlass Bearing 30mm x 45mm x 120mm
Countrose shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£48.30 inc VAT
6mm A1 Marine Fuel Hose
6mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr  For stainless steel hose clips see Water Systems section of the Catalogue
£4.75 inc VAT
 
8mm A1 Marine Fuel Hose
8mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr  For stainless steel hose clips see Water Systems section of the Catalogue
£5.20 inc VAT
10mm A1 Marine Fuel Hose
10mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr  For stainless steel hose clips see Water Systems section of the Catalogue
£6.10 inc VAT
12.5mm A1 Marine Fuel Hose
12.5mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr  For stainless steel hose clips see Water Systems section of the Catalogue
£8.95 inc VAT
 
16mm A1 Marine Fuel Hose
16mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr  For stainless steel hose clips see Water Systems section of the Catalogue
£9.95 inc VAT
19mm A1 Marine Fuel Hose
19mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr  For stainless steel hose clips see Water Systems section of the Catalogue
£12.95 inc VAT
38mm A1 Marine Fuel Hose
38mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr  For stainless steel hose clips see Water Systems section of the Catalogue
£24.95 inc VAT
 
50mm A1 Marine Fuel Hose
50mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr  For stainless steel hose clips see Water Systems section of the Catalogue
£31.95 inc VAT
Heavy Duty Stainless Steel Hose Clamp 48-51mm
Heavy Duty Stainless Steel Hose Clamp 48-51mm
Heavy duty stainless steel hose clamps for use with marine exhaust hose. Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
£7.99 inc VAT
Heavy Duty Stainless Steel Hose Clamp 52-55mm
Heavy Duty Stainless Steel Hose Clamp 52-55mm
Heavy duty stainless steel hose clamps for use with marine exhaust hose. Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
£8.10 inc VAT
 
Heavy Duty Stainless Steel Hose Clamp 60-63mm
Heavy Duty Stainless Steel Hose Clamp 60-63mm
Heavy duty stainless steel hose clamps for use with marine exhaust hose. Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
£8.30 inc VAT
Heavy Duty Stainless Steel Hose Clamp 68-73mm
Heavy Duty Stainless Steel Hose Clamp 68-73mm
Heavy duty stainless steel hose clamps for use with marine exhaust hose. Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
£16.50 inc VAT
Heavy Duty Stainless Steel Hose Clamp 86-91mm
Heavy Duty Stainless Steel Hose Clamp 86-91mm
Heavy duty stainless steel hose clamps for use with marine exhaust hose. Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
£17.20 inc VAT
 
Marine Rubber Exhaust Hose 40mm - Lloyds Approved
Marine Rubber Exhaust Hose 40mm - Lloyds Approved
Lloyds approved marine exhaust hose manufactured with salt water resistant EPDM rubber and double steel helix wire reinforcing. This strong rubber hose provides more flexibilty than other similar hoses allowing easier installation throughout the boat, ideally suited for marine applications. It is essential to use heavy duty stainless steel hose clamps when fitting this type of hose as regular hose...
£22.99 inc VAT
Marine Rubber Exhaust Hose 45mm - Lloyds Approved
Marine Rubber Exhaust Hose 45mm - Lloyds Approved
Lloyds approved marine exhaust hose manufactured with salt water resistant EPDM rubber and double steel helix wire reinforcing. This strong rubber hose provides more flexibilty than other similar hoses allowing easier installation throughout the boat, ideally suited for marine applications. It is essential to use heavy duty stainless steel hose clamps when fitting this type of hose as regular hose...
£23.99 inc VAT
Marine Rubber Exhaust Hose 50mm  - Lloyds Approved
Marine Rubber Exhaust Hose 50mm - Lloyds Approved
Lloyds approved marine exhaust hose manufactured with salt water resistant EPDM rubber and double steel helix wire reinforcing. This strong rubber hose provides more flexibilty than other similar hoses allowing easier installation throughout the boat, ideally suited for marine applications. It is essential to use heavy duty stainless steel hose clamps when fitting this type of hose as regular hose...
£25.99 inc VAT
 
Marine Rubber Exhaust Hose 63mm - Lloyds Approved
Marine Rubber Exhaust Hose 63mm - Lloyds Approved
Lloyds approved marine exhaust hose manufactured with salt water resistant EPDM rubber and double steel helix wire reinforcing. This strong rubber hose provides more flexibilty than other similar hoses allowing easier installation throughout the boat, ideally suited for marine applications. It is essential to use heavy duty stainless steel hose clamps when fitting this type of hose as regular hose...
£29.99 inc VAT
Marine Rubber Exhaust Hose 75mm - Lloyds Approved
Marine Rubber Exhaust Hose 75mm - Lloyds Approved
Lloyds approved marine exhaust hose manufactured with salt water resistant EPDM rubber and double steel helix wire reinforcing. This strong rubber hose provides more flexibilty than other similar hoses allowing easier installation throughout the boat, ideally suited for marine applications. It is essential to use heavy duty stainless steel hose clamps when fitting this type of hose as regular hose...
£31.99 inc VAT
Grease Cup 1/4 BSP 40mm OD
Grease Cup 1/4 BSP 40mm OD
“Stauffors” type grease cups in hot stamped brass suitable for stern tube lubrication or other onboard applications.   For best performance, once installed pack tightly with white marine grease.    Grease Cup Sizing: BSP Male Thread Size x O/A Dia. x Max Height   1/4' x 40mm x 42mm
£9.20 inc VAT
 
Grease Cup 1/8" BSP x 33mm
Grease Cup 1/8" BSP x 33mm
“Stauffors” type grease cups in hot stamped brass suitable for stern tube lubrication or other onboard applications.   For best performance, once installed pack tightly with white marine grease.    Grease Cup Sizing: BSP Male Thread Size x O/A Dia. x Max Height   1/8' x 33mm x 40mm        
£12.95 inc VAT
Stern Gland Packing 1/8"- 3mm PTFE
Stern Gland Packing 1/8"- 3mm PTFE
PTFE gland packing. Approx length depending on size:450-550mm
£4.50 inc VAT
Stern Gland Packing  5mm - 3/16 PTFE
Stern Gland Packing 5mm - 3/16 PTFE
PTFE gland packing. Approx length depending on size:450-550mm
£5.60 inc VAT
 
Stern Gland Packing 6mm - 1/4 PTFE
Stern Gland Packing 6mm - 1/4 PTFE
PTFE gland packing. Approx length depending on size:450-550mm
£6.99 inc VAT
Stern Gland Packing 8mm - 5/16 PTFE
Stern Gland Packing 8mm - 5/16 PTFE
PTFE gland packing. Approx length depending on size:450-550mm
£10.50 inc VAT
Stern Gland Packing 9.5mm - 3/8 PTFE
Stern Gland Packing 9.5mm - 3/8 PTFE
PTFE gland packing. Approx length depending on size:450-550mm
£13.95 inc VAT
 
Stern Gland Packing 12.5mm - 1/2 PTFE
Stern Gland Packing 12.5mm - 1/2 PTFE
PTFE gland packing. Approx length depending on size:450-550mm
£21.00 inc VAT
Engine Cooling Water Inlet Strainer
Engine Cooling Water Inlet Strainer
Engine inlet water strainer with plastic body and a stainless steel filter. The clear removable cover allows easy access to clean the filter gauze. This smaller engine water strainer has a built in side mount bracket, and can be used for 3/4", 25mm and 1 1/2" hoses. Max flow rate is 150 litres per minute.
£25.95 inc VAT
 
Heavy Duty Engine Inlet Water Strainer
Heavy Duty Engine Inlet Water Strainer
Engine inlet water strainer with plastic body and stainless steel filter. This larger model has a max flow rate 300 litres per minute and has two 1 1/2" BSP female ports. Varying sizes of hose tail can be used on this water strainer and these can be found in the water section of this website. Supplied with aluminium mounting bracket
£55.95 inc VAT
Plastic Exhaust Waterlock Silencer
Plastic Exhaust Waterlock Silencer
A high quality plastic exhaust waterlock silencer suitable for 40, 45 & 50mm dia exaust hose.   When installed within the exhaust system it will dramatically reduce noise Size: 640L x 225W x 230H
£55.95 inc VAT
Exhaust Gooseneck
Exhaust Gooseneck
Anti syphon gooseneck which prevents water entering the engine via the transom. Supplied with stepped hose connection to suit 40mm, 45mm or 50mm exhaust hose and plastic fixing straps. Hose Size: 40 - 45 - 50mm Body Size: Width 110mm x Height 480mm Weight: 0.70kg 
£62.99 inc VAT
 
Vetus NLP40 Waterlock
Vetus NLP40 Waterlock
To compliment the well known and proven range of LP waterlocks, VETUS has now introduced several new models, type NLP, made of injection-moulded plastic materials. These have the benefits of being durable, corrosion proof and light in weight. The new NLP waterlocks are of dual stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube through the centre. Compared...
£174.99 inc VAT
Vetus NLP45 Waterlock
Vetus NLP45 Waterlock
To compliment the well known and proven range of LP waterlocks, VETUS has now introduced several new models, type NLP, made of injection-moulded plastic materials. These have the benefits of being durable, corrosion proof and light in weight. The new NLP waterlocks are of dual stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube through the centre. Compared...
£174.99 inc VAT
Vetus NLP50 Waterlock
Vetus NLP50 Waterlock
To compliment the well known and proven range of LP waterlocks, VETUS has now introduced several new models, type NLP, made of injection-moulded plastic materials. These have the benefits of being durable, corrosion proof and light in weight. The new NLP waterlocks are of dual stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube through the centre. Compared...
£174.99 inc VAT
 
Vetus Exhaust Gooseneck
Vetus Exhaust Gooseneck
This platic goose neck prevents seawater from entering into the engine via the transom connection.
£110.00 inc VAT
Vetus Anti-Syphon Vent
Vetus Anti-Syphon Vent
Vetus Air vent suitable for hoses of Ø 1/2', 3/4', 1' and 1-1/4' I.D. If the point of injection of the cooling water is situated at a height less than 6' above the water line, then when the engine is stopped there is a risk that, as a result of syphoning, the cooling water may enter the engine. Such syphoning may be avoided by positioning a VETUS air vent into the cooling water tubing, approx....
£84.95 inc VAT
Vetus Type K Engine Mounts
Vetus Type K Engine Mounts
Vetus TYPE K engine mounts are for smaller engines, up to approx. 60 kW (8O HP). The torque of an engine is one of the deciding factors for determination of the load applied to the Vetus engine mounts. When more powerful engines are installed, it is important to use the following formula to define the load per support in kg (4 supporting points). Engine weight in kg + kW x 487 x reduction of gearbox...
from £44.99 inc VAT
 
Page: 1 | 2 |