Engine Room & Exhaust: Page 2

Waterlock silencer manufactured of high quality plastic suitable for marine use and boat engines, this model of exhaust waterlock silencer is suitable for 40, 45 & 50mm diameter exhaust hose. Installed within the exhaust system it will dramatically reduce noise 40mm/45mm/50mm Hose Connection Size: 640L x 225W x 230H

The NLP Waterlock compliments the well known and proven range of LP waterlocks, VETUS has now introduced several new models, type NLP, made of injection-moulded plastic materials. These have the benefits of being durable, corrosion proof and light in weight, the new NLP waterlocks are of dual stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube...

Vetus Anti-Syphon Air vent suitable for hoses of Ø 1/2', 3/4', 1' and 1-1/4' ,13, 19, 25 and 32 mm I.D. If the point of injection of the cooling water is situated at a height less than 6' above the water line, then when the engine is stopped there is a risk that, as a result of syphoning, the cooling water may enter the engine. Such syphoning may be avoided by positioning a VETUS air vent into...

Vetus Water Separator/Fuel Filter The WS180 is suitable for petrol & diesel marine engines Connections:M14 x 1.5 female thread Capacity:180L/Hour Weight: 0.7kg Size: H207 x D85mm

Water and contaminants accumulating in the fuel tank can often cause engine failure, this can be solved by using a combination fuel water separator which allows the water droplets to drain off in to the clear plastic bowl. Suitable diesel engines up to 200hp. The separator filter has an aluminium head unit with replacable fuel filter and a transparent plastic water bowl. Supplied with a drain plug. Fuel...

Replacement Filter Standard filter cartridge for CAV filter heads resistant to corrosion and used on many marine engines.

PSP Silicone fusion tape is manufactured from a silicone rubber compound which fuses to itself but will not stick to other items. It resists salt water and can even be applied underwater. If you need to remove the tape it leaves no "mastic" residue. Resists extreme temperatures: -54deg C to +260deg C Insulates electrics with a dielectric strength of up to 400VPM Creates a moisture proof silicone sheath Will...