Hull and Trim Tab Anodes

Sort By:
  • display as grid Grid
  • display as list List
View: 24 | 48 | 96 | ALL
Tecnoseal 4Kg Bolt on Zinc Anode 310mm
Tecnoseal 4Kg Bolt on Zinc Anode 310mm
Saltwater zinc bolt-on 4kg bar anode for use on the hull. Dimensions: L310mm x W75mm x H40mm Weight: 4kg 13mm hole diameters 205mm hole centres  
£34.99 inc VAT
Tecnoseal 10.8 Kg Bolt on Zinc Anode 460mm
Tecnoseal 10.8 Kg Bolt on Zinc Anode 460mm
Saltwater zinc bolt-on anode as used by Princess, Fairline and Sunseeker.  Dimensions: L460 mm x W100mm x H45mm Weight: 10.8 kg 19mm hole diameters 230mm hole centres  
£84.99 inc VAT
Tecnoseal zinc 200 mm mini Euro anode
Tecnoseal zinc 200 mm mini Euro anode
Mini Euro zinc bolt on bar anode for use on the hull. For salt water use. 200 mm length, 65 mm width, 32 mm height, 1.30 kg weight 12 mm hole size, up to 110 mm hole centres
£17.99 inc VAT
 
Tecnoseal zinc 320 mm Euro anode
Tecnoseal zinc 320 mm Euro anode
Euro zinc bolt on bar anode for use on the hull. For salt water use. 320 mm length, 65 mm width, 35 mm height, 2.20 kg weight 12 x 65  mm hole sizes, up to 160 mm hole centres
£23.99 inc VAT
Tecnoseal 2Kg Pear Shape Zinc Anode
Sale
Tecnoseal 2Kg Pear Shape Zinc Anode
Low drag saltwater zinc bolt-on Pear Shape anode for use on the hull. Overall Size: L140mm x W90mm width x H39mm. Weight: 2.1kg 13 mm hole diameter 205mm hole centres allowing it to be used on standadrd bolt fixings as used for the 4kg hull anodes also 
Was £22.99 Now £19.99 inc VAT
Aluminium Rudder Disc Anodes 48mm Flange
Aluminium Rudder Disc Anodes 48mm Flange
Performance Metals Premium Aluminum Sacrificial Anodes Performance Metals Premium Line of anodes is manufactured from Navalloy to a military specification MIL-A-24779(SH). Navalloy is a high performance alloy! It contains aluminum, 5% zinc and traces of indium, which ensures that it stays active. Navalloy is more active than zinc so it gives better protection. Navalloy anodes last up to 30% longer...
£6.40 inc VAT
 
Tecnoseal ZD51 70 mm Zinc Disc Anode (Pork Pie Anode)
Tecnoseal ZD51 70 mm Zinc Disc Anode (Pork Pie Anode)
Zinc disc anode for use on rudders and trim tabs. For salt water use. 70 mm diameter, 25 mm height, 0.4 kg weight 11 mm hole size
£10.95 inc VAT
MG Duff ZD52 Zinc Anode
MG Duff ZD52 Zinc Anode
MG Duff Zincl Anode Disc (Pair)With Bolt. 50 mm diameter 15 mm high For saltwater use.
£14.99 inc VAT
Tecnoseal 70mm Zinc Disc Anode
Tecnoseal 70mm Zinc Disc Anode
Zinc disc anode for use on rudders and trim tabs. For salt water use. 70mm diameter, 13mm height, 0.19kg weight 8mm hole size    
£4.99 inc VAT
 
Tecnoseal 110mm Zinc Disc Anode
Tecnoseal 110mm Zinc Disc Anode
Zinc disc anode for use on rudders and trim tabs. For salt water use. 110mm diameter, 18mm height, 0.68kg weight 11mm hole size    
£13.99 inc VAT
M10 Anode Fixing Stud
M10 Anode Fixing Stud
To ensure maximum electrical contact these anode fixing studs are supplied with all necessary fixings and connections. Fitting Instructions:  Select a position on the hull that is under the waterline and preferably within the bilge of the boat. Ensure the bolts are accessible inside the boat for tightening and so that connections can be attached and maintained. The position should be aft...
£5.99 inc VAT
Tecnoseal 90mm Zinc Disc Anode
Tecnoseal 90mm Zinc Disc Anode
Zinc disc anode for use on rudders and trim tabs. For salt water use. 90mm diameter, 18mm height, 0.42kg weight 8mm hole size    
£8.99 inc VAT
 
Anode backing pad to fit 310 mm hull anode
Anode backing pad to fit 310 mm hull anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull. Replace when the anode is replaced.
£2.10 inc VAT
Anode backing pad to fit 460 mm hull anode
Anode backing pad to fit 460 mm hull anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull. Replace when the anode is replaced.
£1.89 inc VAT
Anode backing pad to fit pear shape hull anode
Anode backing pad to fit pear shape hull anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull. Replace when the anode is replaced.
£1.75 inc VAT
 
Anode backing pad to fit 100 mm disc anode
Anode backing pad to fit 100 mm disc anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull. Replace when the anode is replaced.
£1.10 inc VAT
Anode backing pad to fit 150 mm disc anode
Anode backing pad to fit 150 mm disc anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull. Replace when the anode is replaced.
£1.50 inc VAT
Anode backing pad to fit mini euro anode
Anode backing pad to fit mini euro anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull. Replace when the anode is replaced.
£1.29 inc VAT
 
Anode backing pad to fit 320 mm euro anode
Anode backing pad to fit 320 mm euro anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull. Replace when the anode is replaced.
£1.29 inc VAT