Tecnoseal 4Kg Bolt on Zinc Anode 310mm
One of the most common hull anodes this Tecnoseal saltwater zinc bolt-on 4kg bar anode suitable for use on the hull.
Dimensions: L310mm x W75mm x H40mm
Weight: 4kg
13mm hole diameters
205mm hole centres
Tecnoseal 11 Kg Bolt on Zinc Anode 460mm
Tecnoseal saltwater zinc bolt-on anode as used by Princess, Fairline and Sunseeker.
Dimensions: L460 mm x W100mm x H45mm
Weight: 11 kg
19mm hole diameters
230mm hole centres
Tecnoseal Zinc 200 mm Mini Euro anode
Tecnoseal Mini Euro zinc bolt on bar anode for use on the hull.
For salt water use.
200 mm length, 65 mm width, 32 mm height
1.30 kg weight
12 mm hole size, up to 110 mm hole centres
Tecnoseal Zinc 320 mm Euro anode
Tecnoseal Euro zinc bolt on bar anode for use on the hull.
For salt water use.
320 mm length, 65 mm width, 35 mm height,
2.20 kg weight
12 x 65 mm hole sizes, up to 160 mm hole centres
Tecnoseal 2.1Kg Pear Shape Zinc Anode
Tecnoseal low drag saltwater zinc bolt-on Pear Shape anode is a popular choice for use on the hull.
Overall Size: L140mm x W90mm width x H39mm.
Weight: 2.2kg
13 mm hole diameter
205mm hole centres allowing it to be used on standard bolt fixings as also used for the 4kg hull anodes.
Aluminium Rudder & Trim Tab Disc Anodes
Technoseal Rudder & Trim Tab Anodes
Perfect for attaching to rudders and trim tabs, these anodes are supplied as a pair with fixing bolt.
Being aluminium these anodes are lightweight and suitable for both fresh and salt water use.
R1AL: Dia. 47mm x H7mm x Bolt 6.5mm
R2AL: Dia. 72mm x H11mm x Bolt 7mm
R3AL: Dia. 92mm x H13mm x Bolt 8.5mm
R4AL: Dia. 127mm x H13mm x Bolt 9mm
Sold...
Tecnoseal ZD51 70mm Zinc Disc Anode (Pork Pie Anode)
Tecnoseal zinc disc anode, traditionally known as a pork pie anode suitable for use on rudders and trim tabs.
For salt water use.
70 mm diameter, 25 mm height, 0.4 kg weight
11 mm hole size
MG Duff ZD52 Zinc Anode
MG Duff ZD52 Zinc Disc Anode
Suitable for protecting trim tabs and rudders
Supplied as a pair with bolt.
50 mm diameter
15 mm high
For saltwater use.
Tecnoseal 70mm Zinc Disc Anode
Tecnoseal Zinc disc anode for use on rudders and trim tabs.
For salt water use.
70mm diameter,
13mm height,
0.19kg weight
8.5mm hole size
Tecnoseal 90mm Zinc Disc Anode
Tecnoseal 90mm zinc disc anode for use on rudders and trim tabs.
For salt water use.
90mm diameter
17mm height
0.42kg weight
8.5mm hole size
Tecnoseal 110mm Zinc Disc Anode
Tecnoseal Zinc disc anode for use on rudders and trim tabs.
For salt water use.
110mm diameter
18mm height,
0.68kg weight
10.5mm hole size
M10 Anode Fixing Stud c/w Connectors, Nuts & Washers
To ensure maximum electrical contact these anode fixing studs are supplied with all necessary fixings and connections.
Fitting Instructions:
Select a position on the hull that is under the waterline and preferably within the bilge of the boat.
Ensure the bolts are accessible inside the boat for tightening and so that connections can be attached and maintained.
The position should be aft of any depth...
Anode Backing Pad to fit 310 mm 4 Kilo Hull Anode
Pad to fit 4kg 310 mm hull anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit 460mm 7 & 12 Kilo Anode
Pad to fit 7kg & 11kg 460 mm hull anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit Pear Shape Hull Anode
Pad to fit pear shape hull anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit 100 mm Button Anode
Anode backing Pad to fit 100 mm disc or button anode
Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit 150 mm Button Anode
Pad to fit 150 mm disc anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit Mini Euro Anode
Pad to fit mini euro anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit 320 mm Euro Anode
Pad to fit 320 mm euro anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.