All Inflatable Boat Accessories

The Seago tender cover provides invaluable extra protection for your inflatable tender. Lined with a UV protective layer these semi-tailored covers with tight elastic trim and polyester strapping which snuggly fit to your tender. To properly care for your inflatable this is a must have accessory as UV rays and heat are the biggest contributors to shortening the lifecycle of your tender. Suitable for...

Seago Inflatable Boat Seat Bag and Padded Seat Cover - Currently one only Soiled To Clear The perfect accessory for your tender, adding comfort and storage. The padded seat cover is adjustable and fits all Seago inflatable boats and will also fit a large range of other brands too. The storage bag attaches with a strong zip and the water resistant storage area has a large opening. When you disembark...

Bravo BTP12 electric inflator - easy to use - reliable and powerful. Maximum pressure of 1 bar (14.5 psi), which is enough to inflate all types of dinghies and kites on the market today. Pressure selection facilitated with this special manometer.Reading scale in bar and psi. Voltage 12 V DC Max pressure 1 bar/14,5 psi Turbine flow rate 450 l/min Piston flow rate 160 l/min Consumption 20 A max Automatic...

Bravo 7 Foot Pump- A quality 5 litre foot pump ideal for inflatable boats, canoes & beds.• Max 5.8psi• Supplied with universal adaptors

The Bravo 10 is a proffesional double chamber bellows foot pump with addition of a pressure indicator. The user can pump at high volume, low pressure then switch to low volume, high pressure by removing a small plug. Suitable for all inflatable boats, SUP's and kayaks Inflate and deflate Long flexible hose with connectors for the most common valve systems

Inexpensive dinghy launching wheels can be easily attached to the transom of your tender so you will easily be able to wheel your tender anywhere over hard sand and paved surfaces. You will no longer risk damaging your tender by dragging it, or struggle to carry it! The wheels are made from lightweight, robust ABS plastic which is resistant to outdoor elements, they will not rust, corrode or deteriorate...

One PAIR of stainless steel buttons to go onto transom. These are to take launching wheels Z1290 (discontinued) and Z61110 - normally fitted by the factory during production to Bombard Aerotecs and Commando Boats and to Zodiac Classics and Futura Boats

Propeller Bags A real must have if you are towing and the outboard engine or outdrive is exposed. Made of bright nylon with a draw string cord. Towing without a prop bag warrants points on your licence. Propeller Bag Med up to 40hp

Propeller Bags A real must have if you are towing and the outboard engine or outdrive is exposed. Made of bright nylon with a draw string cord. Towing without a prop bag warrants points on your licence.

Flexible water based acrylic latex sealant used internally for sealing porosity and minor leaks in Hypalon, PVC inflatables and similar fabrics. Simple and effective to use. Inflate the tube or tubes to be repaired and then remove valve system allowing the tubes to deflate, pour in the Sealflex liquid, reinflate the tubes and allow it to coat the inside of the tubes by lifting and rotating the boat...

Repair kit for emergency repairs, which is supplied in hard waterproof container with tamper proof lid. A handy item to keep on board for repairs to Hypalon inflatble boats. Contains 70ml tube of Hypalon adhesive, 35 x 15cm of Hypalon material, abrasive paper and instructions. Available in Grey, White, Orange or Black PLEASE NOTE:- For a permanant repair 2 part adhesive must be used.

Single part 70ml tube PVC Adhesive Solvent based polyurethene giving excellent adhesion to both plasticised and unplasticised PVC. Will bond a variety of surfaces including wood, canvas, leather, PVC, nylon fabric, polyurethane fabric and foam. Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex". Used by liferaft service stations...

Hypalon Adhesive 2 part 250ml tin with 10ml curing agent. Solvent based polyurethene giving excellent adhesion to both plasticised and unplasticised PVC. Will bond a variety of surfaces including wood, canvas, leather, nylon fabric, polyurethene fabric and foam. Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex". Used by liferaft...

Polymarine P510 Primer Solvent for use with Hypalon fabric when carrying out repairs and bonding patches. For degreasing hypalon surfaces before adhering and cleaning brushes Use sparingly with a soft cloth, evaporates quickly Suitable for reactivating applied adhesive P510 containing MEK Supplied in 500ml metal containers with screw top

Inflatable Boat GRP Polish Wipe on Polish and wipe off. Gently buffs and polishes to a brilliant shine without scratching. Totally safe on all marine materials. Supplied in 250ml flip top bottle

Flexible repair sealant and adhesive for a waterproof permanant repair to coated fabrics, PVC, PU, neoprene, rubber, leather, most plastics and fabrics. Multiple uses including repairs to inflatable boat and RIB tubes, wet suits, dry suits, waders, boat fenders, tents and awnings, sails, diving and skiing equipment, foul weather gear, flotation vests, footwear, vinyl upholstery and thousands more items. Creates...