Grid
List
Tecnoseal 90mm Zinc Disc Anode
Tecnoseal 90mm zinc disc anode for use on rudders and trim tabs.
For salt water use.
90mm diameter
17mm height
0.42kg weight
8.5mm hole size
Tecnoseal 110mm Zinc Disc Anode
Tecnoseal Zinc disc anode for use on rudders and trim tabs.
For salt water use.
110mm diameter
18mm height,
0.68kg weight
10.5mm hole size
Sleipner Side-Power Bow Thruster Anode 31180A
Sleipner anode and Screw for SP30, SE30, SP40 and SE40 (1 needed)
Sleipner Side-Power Bow Thruster Anode 71190A
Sleipner anode and Screw for SP55S, SE60/185S, SP75T, SE80/185T, SP95T and SE100/185T models
1 needed for S models
2 needed for T models
Sleipner Side-Power Bow Thruster Anode 201180A
Sleipner anode and Screw for SP125T-285TC, SE120, SE150, SP220/300HYD and SH160 Composite Props (2 needed)
Side-Power genuine part
Vetus Bow Thruster Anodes
Zinc Bow Thruster anodes specific to Vetus models listed below:
SET0148: 38mm dia. Models 25kgf, BOWA030
SET0149: 50mm dia. Models 35, 45, 55kgf, BOWA036, 042, 057, BOWB042, 057
SET0150: 60mm dia. Models 60, 75, 80, 95kgf, BOWA065, 076, 090, BOWB065, 076, 090
SET0151: 59mm dia. Models 125, 130, 160kgf, BOWA110
SET0152: 49mm dia. Models 220, 239, 285, 300, 310kgf
SET0153:
M10 Anode Fixing Stud c/w Connectors, Nuts & Washers
To ensure maximum electrical contact these anode fixing studs are supplied with all necessary fixings and connections.
Fitting Instructions:
Select a position on the hull that is under the waterline and preferably within the bilge of the boat.
Ensure the bolts are accessible inside the boat for tightening and so that connections can be attached and maintained.
The position should be aft of any depth...
Anode Backing Pad to fit 100 mm Button Anode
Anode backing Pad to fit 100 mm disc or button anode
Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit 150 mm Button Anode
Pad to fit 150 mm disc anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit Pear Shape Hull Anode
Pad to fit pear shape hull anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit 310 mm 4 Kilo Hull Anode
Pad to fit 4kg 310 mm hull anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit 460mm 7 & 12 Kilo Anode
Pad to fit 7kg & 11kg 460 mm hull anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit Mini Euro Anode
Pad to fit mini euro anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit 320 mm Euro Anode
Pad to fit 320 mm euro anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.