West System - Maintenance

The West System A Pack is a combined 1.2kg pack of epoxy resin with a choice of either the 205 Fast or 206 Slow curing hardener, It is recommended to use the calibrated pump sets to achieve correct mixing proportions and maintain the maximum cured strength. Pot life at 25°C: 10 to 15 minutes Cure to solid state at 21°C: 5 to 7 hours Cure to maximum strength at 21°C: 5 to 7 days Minimum...

 West System 301A Pump Set Specially designed for convenient and accurate dispensing of WEST SYSTEM 105 Resin and 205 or 206 Hardeners. The pumps mount directly on the resin and hardener containers and have been calibrated to deliver the correct working ratio of 5 parts by volume of resin to 1 part by volume of hardener with one stroke from each pump WARNING: DO NOT USE 301 MINI...

The West System B Pack is a combined 6kg pack of epoxy resin with a choice of either the 205 Fast or 206 Slow curing hardener, It is recommended to use the calibrated pump sets to achieve correct mixing proportions and maintain the maximum cured strength. Pot life at 25°C: 10 to 15 minutes Cure to solid state at 21°C: 5 to 7 hours Cure to maximum strength at 21°C: 5 to 7 days Minimum...

West System 301B Pump Set Specially designed for convenient and accurate dispensing of WEST SYSTEM 105 Resin and 205 or 206 Hardeners. The pumps mount directly on the resin and hardener containers and have been calibrated to deliver the correct working ratio of 5 parts by volume of resin to 1 part by volume of hardener with one stroke from each pump. WARNING: DO NOT USE 301 MINI PUMPS...

The West System epoxy mini pack 101 contains a selected mix of materials used to complete smaller repairs around the boat, in the workshop or at home. Contents include: 250g 105 Resin, 50g 205 Hardener, 403 & 407 fillers, dispensing syringes, application tools, gloves and instructions. 

The West System 104 Junior Pack  contains: WEST SYSTEM 104 Junior Pack is a 600g pack of West System epoxy (105-205). WEST SYSTEM 104 Junior Pack is designed for the small user or a refill for the Handy Repair Pack.

The West System Epoxy 105-K Glass Fibre Boat Repair Kit Contains: 250g 105 Epoxy Resin® 50g 205 Fast Hardener® 402 Milled Glass Fibre Blend 409 Microsphere Blend 3x mixing cups 1x reusable mixing stick 2 pairs of nitrile gloves 2x glue brushes 2x syringes 1m x 125mm 450g/m² biaxial glass tape 1m x 75mm 175g/m² plain weave glass tape 1m x 100mm peel ply  

West System G5 rapid is an easy to use two part fast setting resin/hardener system. This adhesive is ideal for quick repairs and general bonding around the boat and in the home the workshop or garage. It is suited for spot applications to hold component parts in position whilst bonding is completed with WEST SYSTEM epoxy. G5 will adhere to most prepared surfaces including wood fibreglass and...

SIX10 Adhesive combines strength and reliability of a two-part west system epoxy with a simple sealant type application. The self-metering coaxial cartridge dispenses a gap filling structural epoxy that bonds tenaciously to wood, metals, GRP and concrete. The tube is supplied with a static mixer taht lets you lay down a bead of thickened epoxy with any standard caulking gun. Size: 190ml

405 Filleting Blend Filler 150gm Consists of a mix of cellulose fibres and other fillers for use in filleting applications when a naturally finished interior is intended. Alcohol or water based stains may be added to adjust the colour. Add 15% to 25% of Filleting Blend by weight. Colour: Tan

406 Colloidal Silica 60gm General purpose thickening additive suitable for bonding, gap-filling and filleting. 406 can be used to prevent resin flow on vertical and overhead surfaces and to control the viscosity of the epoxy. Add 3% to 8% by weight to the resin/hardener mix. Colour: Off-White.

410 Microlight Filler 50gm This low density filler is ideal for creating a lightweight, easily worked fairing compound, especially suited for large areas. Microlight holds a fantastic feather edge and is the easiest filler throughout the West System range to fair. Add between 7% to 16% by weight to mixed epoxy. Colour: Tan

High quality steel paddle roller designed for distributing resins to through heavy matt cloths. Laminating Paddle Roller 22mm x 50mm