Primers & Undercoat

Hempel's Light Primer is a two component high performance epoxy primer and undercoat for use both above and below the waterline. Use on glassfibre, wood, steel and aluminium. Superb corrosion, impact and water resistance. Use before Ocean Gloss/PolyGloss/Brilliant Gloss topcoat for a long-lasting solution. Can also be used for osmosis protection when application is required at low...

International PreKote is the recommended undercoat for all international one pack paint finishes. Suitable for GRP, Primed Wood, Steel or Aluminium. Easy to apply, fast drying and easy to sand. Can Size: 750ml Area: Above the waterline  Finish: Low Sheen No. of coats: 1 - 2  Thinner: No.1 Practical Coverage (m²/Lt): 12.0 Substrates: GRP, Wood*,...

International PreKote is the recommended undercoat for all international one pack paint finishes. Suitable for GRP, Primed Wood, Steel or Aluminium. Available in 750ml or 2.5Ltr Cans Easy to apply, fast drying and easy to sand. Can Size: 2.5ltr Area: Above the waterline  Finish: Low Sheen No. of coats: 1 - 2  Thinner: No.1 Practical Coverage (m²/Lt): 12.0 Substrates: GRP,...

Owatrol CIP (Corrosive Inhibiting Primer) is a rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes. It contains the anti-corrosive properties of Marine Oil which enables it to stabilise the surface by penetrating deep into the substrate, driving out excess moisture and air to form a solid stable layer. CIP is easy to use and...

International Perfection A high performance, extremely tough, long-lasting two pack undercoat for use under Perfection® finish. The semi-gloss finish allows easy checking of hull fairness. Excellent covering power (opacity). Area: Above the waterline  Finish: Semi Gloss Practical Coverage (m²/Lt): 12.0 No. of coats: 1 - 2 Substrates: GRP, Wood, Steel,...

YACHT PRIMER (Grey Single Pack Primer) Conventional one-part primer for use above the water Quick drying, with anticorrosive properties Pigments contain aluminium flake to provide an anti-corrosive protective barrier Area: Above water, under one-part undercoats (Do NOT overcoat with two-part products) Practical Coverage (m²/Lt): 12.0 No. of coats: 4 Substrates: Wood,...

YACHT PRIMER (Grey Single Pack Primer) Conventional one-part primer for use above the water Quick drying, with anticorrosive properties Pigments contain aluminium flake to provide an anti-corrosive protective barrier Area: Above water, under one-part undercoats (Do NOT overcoat with two-part products) Practical Coverage (m²/Lt): 12.0 No. of coats: 4 Substrates: Wood,...

PRIMOCON® (Grey Single Pack Primer) Conventional one-part primer for use below water Quick drying, with anticorrosive properties Can be used under all major antifoulings or as a conversion coat over incompatible or unknown antifoulings Area: Below the waterline. Finish: Matt No. of coats: 1 - 5 Practical Coverage (m²/Lt): 7.4 Substrates: GRP, Wood, Steel,...

PRIMOCON® (Grey Single Pack Primer) Conventional one-part primer for use below water Quick drying, with anticorrosive properties Can be used under all major antifoulings or as a conversion coat over incompatible or unknown antifoulings Area: Below the waterline. Finish: Matt No. of coats: 1 - 5 Practical Coverage (m²/Lt): 7.4 Substrates: GRP, Wood, Steel,...

Interprotect® is a quick drying, easy to apply two-pack epoxy primer for high performance protection on all rigid substrates. It's two-component application gives excellent anti-corrosive and abrasion resistance properties and it can be used equally above or below the waterline. Coverage: 6m2/750ml  Finish: Matt No. of coats: 2 - 5 Substrates: Wood, Steel, Aluminium Application: Brush,...

Interprotect® is a quick drying, easy to apply two-pack epoxy primer for high performance protection on all rigid substrates. It's two-component application gives excellent anti-corrosive and abrasion resistance properties and it can be used equally above or below the waterline. Coverage: 20.3m2/2.5lt Finish: Matt No. of coats: 2 - 5 Substrates: Wood, Steel, Aluminium Application: Brush,...

Gelshield 200 A quick drying, high performance, two-component epoxy for application to sound gelcoats to help protect against osmosis. Gelshield 200 is provided in two shades (green and grey) to ensure complete coverage of the hull. Suitable for use in temperatures down to 5°C. Colours: Green/Grey Can Size: 750ml Coverage: 6m2/750ml Thinners: No.7

Gelshield 200 A quick drying, high performance, two-component epoxy for application to sound gelcoats to help protect against osmosis. Gelshield 200 is provided in two shades (green and grey) to ensure complete coverage of the hull. Suitable for use in temperatures down to 5°C. Colours: Green/Grey Can Size: 2.5Ltr Coverage: 19sqm/2.5Ltr Thinners: No.7

 Underwater Primer Grey A fast drying, underwater primer with excellent waterproofing properties, for use on all areas and substrates, below the waterline, especially keels. Also a tiecoat for use prior to antifouling, either directly onto the hull or onto a primed surface and between an existing antifouling and a new antifouling. For use below the waterline. TempTouch dryRe-coat (min/max)Thinner/Tool...

Underwater Primer Grey  Use Hempel's Underwater Primer as part of a single component system below the waterline, including keels; and as a tiecoat before antifouling. Can be applied directly onto the hull or a primed surface, and between an existing antifouling and a new antifouling. Fast-drying with excellent waterproofing. TempTouch dryRe-coat (min/max)Thinner/Tool cleanerCovers 10ºC 6...

Flag Multi Purpose Metallic Primer Universal grey metallic primer suitable for above and below the waterline on all substrates with good waterproofing and corrosion resisting performance. Also suitable as a primer or barrier coat under FLAG and other traditional antifoulings. Can Size: 1Ltr

Flag Multi Purpose Metallic Primer Universal grey metallic primer suitable for above and below the waterline on all substrates with good waterproofing and corrosion resisting performance. Also suitable as a primer or barrier coat under FLAG and other traditional antifoulings. Can Size: 2.5Ltr

 

Prop-Primer An anti-corrosive primer and tie coat for different substrates. Recommended for use as primer for antifouling on propellers and outboard engines on yachts. Fast drying, good adhesion to steel and other metals, re-coatable with the most common types of paint. Supplied in spray can and recommended for use as a primer for antifouling on propellers, out board engines, chock marks, drive...

Primer Undercoat A quick drying, high opacity primer and undercoat providing excellent durability and surface stability in preparation for overcoating with single pack systems. Suitable for all substrates, especially steel, and as an undercoat for Hempel Brilliant Gloss and Multi Coat. For use above the waterline. 750ml Tins

G.4 Primer-Sealer A clear moisture cured polyurethane primer-sealer for wood, metal or cement/concrete. It forms a non-porous plastic coating which is tough and flexible with excellent adhesion to most materials including GRP. Use as a bonding primer when sheathing wooden or metalhulls with GRP or when adding fittings. A primer sealer for cast iron ballast keels prior to the application of anti-foulings. Proven...