Sort By:
  • display as grid Grid
  • display as list List
View: 24 | 48 | 96 | ALL
Page: 1 | 2 | 3 |
Jabsco Accumulator Tank 1L (With Membrane)
Jabsco Accumulator Tank 1L (With Membrane)
Connections: CONNECTIONS - for 13mm (½”) bore hose or threaded ports Dimensions: DIMENSIONS - 340mm long, 120mm wide, 110mm deep Output: VOLUME - nominal 1 litre, working capacity up to approximately 0.5 litres Plastic vessel with internal membrane. May be mounted at any angle Compact size for small pressure systems (typically 1 - 2 outlets). Supplied with 2 snap-in connectors for...
£66.95 inc VAT
Xylem 2ltr Accumulator Tank - Expansion Vessel (CW269)
Xylem 2ltr Accumulator Tank - Expansion Vessel (CW269)
The accumulator tank or expansion tank functions on the principle that air will compress under pressure whilst fluids will not. An accumulator half fills with wateras the pump operates meaning that depending on the size of the tank you can run off small amounts of water without thge pump cutting in, thus prolonging the life of the pump. The air also acts as a cushion, absorbing pressure fluctuations...
£32.99 inc VAT
Xylem Accumulator Tank 1/2" Hose Connection Kit (CW322)
Xylem Accumulator Tank 1/2" Hose Connection Kit (CW322)
Accumulator Tank Fitting Kit - ½" BSP Connections: - 2 brass hose connectors, 1 threaded T-connector For easy connection into pressure systems assembled with flexible hose For use with CW269 (2 litre) accumulator tanks
£15.99 inc VAT
 
Xylem 8ltr Accumulator Tank - Expansion Vessel (CW288)
Xylem 8ltr Accumulator Tank - Expansion Vessel (CW288)
The accumulator tank or expansion tank functions on the principle that air will compress under pressure whilst fluids will not. An accumulator half fills with wateras the pump operates meaning that depending on the size of the tank you can run off small amounts of water without thge pump cutting in, thus prolonging the life of the pump. The air also acts as a cushion, absorbing pressure fluctuations...
£46.99 inc VAT
Xylem Accumulator Tank 3/4" Hose Connection Kit (CW323)
Xylem Accumulator Tank 3/4" Hose Connection Kit (CW323)
Accumulator Tank Fitting Kit - ¾" BSP Connections: - 2 brass hose connectors, 1 threaded T-connector and two ½" - ¾" brass adaptors For easy connection into pressure systems assembled with flexible hose For use with CW385 (5 litre), CW288 (8 litre) and CW291 (20 litre) accumulator tanks
£26.99 inc VAT
Xyelm Accumulator Tank Bracket Kit (CW324)
Xyelm Accumulator Tank Bracket Kit (CW324)
CW324 Accumulator Tank Bracket Kit. Fits 2 litre, 5 litre and 8 litre tanks
£19.99 inc VAT
 
Jabsco Mini Accumulator Tank 0.6 litre (with membrane)
Jabsco Mini Accumulator Tank 0.6 litre (with membrane)
Connections: - for 13mm (½”) bore hose or threaded ports Dimensions: - 214mm long, 119mm wide, 110mm deep Output: VOLUME - nominal 0.6 litre, working capacity up to approximately 0.3 litres Plastic vessel with internal membrane. May be mounted at any angle Compact size for small pressure systems (typically 1 - 2 outlets). Supplied with 2 snap-in connectors for 13mm (½”)...
£29.95 inc VAT
LP900D Rule LoPro Submersible Pump 12v
LP900D Rule LoPro Submersible Pump 12v
Rule LoPro Submersible Pump Connections: For 19mm (3/4"), 25mm (1") or 28mm (1 1/8") bore hose. Dimensions: 193mm long, 59mm diameter. Current Draw: 4(amps) Fuse Size: 7.5 amp Output: Up to 56 litres/minute (12.5 gallons/minute). Max. recommended discharge head 3m Brings Rule pumping power to tight spaces. Fully rotating discharge body for installation flexibility. Choice...
£39.95 inc VAT
LP900S Rule LoPro Submersible Pump 12vLP900S Rule LoPro Submersible Pump 12v
LP900S Rule LoPro Submersible Pump 12v
Connections: For 19mm (3/4"), 25mm (1") or 28mm (1 1/8") bore hose. Dimensions: 237mm long, 59mm diameter. Current Draw: 4(amps) Fuse Size: 7.5 amp Output: Up to 56 litres/minute (12.5 gallons/minute). Max. recommended discharge head 3m Brings Rule pumping power to tight spaces. Fully rotating discharge body for installation flexibility. Choice of discharge ports supplied...
£54.95 inc VAT
 
Whale Supersub 500 Bilge Pump 12v
Whale Supersub 500 Bilge Pump 12v
The Super Sub pump range is the best choice for under engines and any confined spaces. Super Sub 500 12v pump has a 19mm hose connection. Supersub Family - Narrow, Low profile bilge pump fits deep down in small/awkward bilge spaces where other pumps won't fit. Low narrow design for confined bilge spaces, Easy installation - outlet and pump body rotate to suit your installation 500gph
£24.50 inc VAT
Whale Supersub 1100 12v with NRV
Whale Supersub 1100 12v with NRV
The Whale Supersub 1100 is a new higher capacity electric bilge pump. The pump has a low profile design suitable for narrow bilge spaces where space is limited and with a non-return valve included, the pump leaves the bilge almost dry depending on installation.  With a multi-position outlet and long caulked wires installation is quick and simple and a manual override facility is included....
£38.95 inc VAT
Whale Supersub Smart 650 Automatic Bilge Pump 12v
Whale Supersub Smart 650 Automatic Bilge Pump 12v
A fully automatic bilge pump featuring a low profile design for narrow bilges or small spaces. It has solid state switching - no moving parts - so is unaffected by wave motion and is environmentally friendly - mercury free. It can be mounted vertically or horizontally and features a removeable strainer for easy cleaning and is designed to leave a minimum water level of 10mm in the bilge.Flow Rate:...
£44.95 inc VAT
 
Whale Supersub Smart 1100 Automatic Bilge Pump 12v
Whale Supersub Smart 1100 Automatic Bilge Pump 12v
The narrow low profile automatic compact bilge pump range. Supersub Family - Narrow, Low profile bilge pump fits deep down in small/awkward bilge spaces where other pumps won't fit. •Low narrow design for confined bilge spaces •Easy installation - outlet and pump body rotate to suit your installation •High performance - Flow up to 1100 US gals per hour •Efficient operation...
£84.95 inc VAT
New Rule 360 Submersible Bilge Pump 12v
New Rule 360 Submersible Bilge Pump 12v
Connections: For 19mm (3/4") bore hose. Dimensions: 99mm high, 64mm x 74mm. Current Draw: 2.1(amps) Fuse Size: 2.5 amp Output: Up to 23 litres/minute (5 gallons/minute) without check valve. Max. recommended discharge head 2m. Light, compact pump for ski-boats and small vessels. Tough plastic body with integral strainer. Quick release inlet strainer allows rapid cleaning. Low...
£18.95 inc VAT
New Rule 500 Submersible Bilge Pump 12v
New Rule 500 Submersible Bilge Pump 12v
Connections: For 19mm (3/4") bore hose. Dimensions: 99mm high, 64mm x 74mm. Current Draw: 1.6(amps) Fuse Size: 2.5 amp Output: Up to 31 litres/minute (7 gallons/minute) without check valve. Max. recommended discharge head 2m. Light, compact pump for ski-boats and small vessels. Tough plastic body with integral strainer. Quick release inlet strainer allows rapid cleaning. Low...
£21.95 inc VAT
 
Rule 800 Submersible Bilge Pump 12v
Rule 800 Submersible Bilge Pump 12v
Connections: For 19mm (3/4") bore hose. Dimensions: 111mm high, 64mm x 74mm. Current Draw: 3.4(amps) Fuse Size: 5 amp Output: Up to 50 litres/minute (11 gallons/minute) without check valve. Max. recommended discharge head 2m. Light, compact pump for ski-boats and small vessels. Tough plastic body. Quick release inlet strainer allows rapid cleaning. Low amp draw conserves...
£34.95 inc VAT
New Rule 1100 Submersible Bilge Pump 12v
New Rule 1100 Submersible Bilge Pump 12v
The new Rule 1100 features the following Connections: For 25mm (1") and 28mm (1 1/8") bore hose. Dimensions: 111mm high, 64mm x 74mm. Current Draw: 3.7(amps) Fuse Size: 6 amp Output: Up to 69 litres/minute (15 gallons/minute) without check valve. Max recommended discharge head 2m. Compact pump for smaller vessels. Tough plastic body. Quick release inlet strainer allows...
£36.95 inc VAT
Rule 1500 Submersible Bilge Pump 12v
Rule 1500 Submersible Bilge Pump 12v
Connections: For 28mm (1 1/8") bore hose. Dimensions: 153mm high, 100mm base diameter. Fuse Size: 9 amp Output: Up to 95 litres/minute (21 gallons/minute). Max. recommended discharge head 2m. For mid-sized yachts and motor cruisers. Tough plastic body with integral strainer. Quick release inlet strainer allows rapid cleaning. Ignition protected. For automatic operation...
£74.95 inc VAT
 
Rule 1500 Submersible Bilge Pump 24v
Rule 1500 Submersible Bilge Pump 24v
Connections: For 28mm (1 1/8") bore hose. Dimensions: 153mm high, 100mm base diameter. Fuse Size: 4 amp Output: Up to 95 litres/minute (21 gallons/minute). Max recommended discharge head 2m. For mid-sized yachts and motor cruisers. Tough plastic body with integral strainer. Quick release inlet strainer allows rapid cleaning. Ignition protected. For automatic operation...
£81.95 inc VAT
Rule 2000 Submersible Bilge Pump 12v
Rule 2000 Submersible Bilge Pump 12v
Connections: For 28mm (1 1/8") bore hose. Dimensions: 155mm high, 105mm base diameter. Fuse Size: 15 amp Output: Up to 120 litres/minute (27 gallons/minute). Max. recommended discharge head 3m. For mid-sized yachts and motor cruisers. Tough plastic body with integral strainer. Quick release inlet strainer allows rapid cleaning. Motor rated for 2500-hour life. Ignition...
£99.95 inc VAT
Rule 2000 Submersible Bilge Pump 24v
Rule 2000 Submersible Bilge Pump 24v
Connections: For 28mm (1 1/8") bore hose. Dimensions: 155mm high, 105mm base diameter. Fuse Size: 10 amp Output: Up to 120 litres/minute (27 gallons/minute). Max recommended discharge head 3m. For mid-sized yachts and motor cruisers. Tough plastic body with integral strainer. Quick release inlet strainer allows rapid cleaning. Motor rated for 2500-hour life. Ignition protected. For...
£109.95 inc VAT
 
Rule 3700 Submersible Bilge Pump 12v
Rule 3700 Submersible Bilge Pump 12v
Connections: For 38mm (1.5") bore hose. Dimensions: 180mm high, 135mm base diameter. Fuse Size: 20 amp Output: Up to 220 litres/minute (48 gallons/minute). Max. recommended discharge head 4m. High capacity pump for larger yachts and motor cruisers. Tough plastic body. Quick release inlet strainer allows rapid cleaning. Motor rated for 2500-hour life. Ignition protected. For...
£169.95 inc VAT
Rule 3700 Submersible Bilge Pump 24v
Rule 3700 Submersible Bilge Pump 24v
The Rule submersible bilge pump is a light weight, compact pump with a tough plastic body and integral strainer. The quick release strainer allows for rapid cleaning of the submersible bilge pump internal components. 38 mm outlet
£175.95 inc VAT
Rule 360 With Float Switch 12v
Rule 360 With Float Switch 12v
Rule 360 Submersible pump 12 volt DC with Rule-a-matic Non Mercury Float Switch Light- compact pump for ski-boats and small vessels. Tough plastic body with integral strainer. Quick release inlet strainer allows rapid cleaning. Low amp draw conserves batteries. Ignition protected. Output: Up to 23 litres/minute (5 gallons/minute). Max. recommended discharge head 2m. Connections: For 19mm (3/4")...
£38.95 inc VAT
 
New Rule 500 Fully Automatic Submersible Bilge Pump 12v
New Rule 500 Fully Automatic Submersible Bilge Pump 12v
Rule fully automatic 500 Gallon per hour submersible pump with computerised operation eliminating the need for a separate float switch. Once power is supplied, starting and stopping is completely automatic. The pump checks for water every 2 ½ minutes by turning on for a second and measuring load against the impeller. If water is present, the pump remains on until the water is removed. Thereafter...
£58.95 inc VAT
Rule 1100 Fully Automatic Submersible Bilge Pump 12v
Rule 1100 Fully Automatic Submersible Bilge Pump 12v
Rule fully automatic 500 Gallon per hour submersible pump with computerised operation eliminating the need for a separate float switch. Once power is supplied, starting and stopping is completely automatic. The pump checks for water every 2 ½ minutes by turning on for a second and measuring load against the impeller. If water is present, the pump remains on until the water is removed. Thereafter...
£89.95 inc VAT
Rule Mate 500 Submersible Bilge Pump 12v
Rule Mate 500 Submersible Bilge Pump 12v
Connections: For 19mm (3/4") bore hose. Dimensions: 114mm high, 152mm long, 83mm wide. Fuse Size: 3 amp Output: Up to 31 litres/minute (7 gallons/minute). Max. recommended discharge head 2m. Fully automated bilge pump with integral float switch. Compact pump for smaller vessels. Tough plastic body. Quick release inlet strainer allows rapid cleaning. Low amp draw conserves batteries. Ignition...
£55.95 inc VAT
 
Rule Mate 750 Submersible Bilge Pump 12v
Rule Mate 750 Submersible Bilge Pump 12v
Connections: For 19mm (3/4") bore hose. Dimensions: 114mm high, 152mm long, 83mm wide. Fuse Size: 5 amp Output: Up to 47 litres/minute (10 gallons/minute). Max. recommended discharge head 2m. Fully automated bilge pump with integral float switch. Compact pump for smaller vessels. Tough plastic body. Quick release inlet strainer allows rapid cleaning. Low amp draw conserves batteries. Ignition...
£69.95 inc VAT
Rule Mate 1100 Submersible Bilge Pump 12v
Rule Mate 1100 Submersible Bilge Pump 12v
Connections: For 28mm (1 1/8") bore hose. Dimensions: 114mm high, 152mm long, 83mm wide. Fuse Size: 5 amp Output: Up to 69 litres/minute (15 gallons/minute). Max. recommended discharge head 2m. Fully automated bilge pump with integral solid state switch. Compact pump for smaller vessels. Tough plastic body. Quick release inlet strainer allows rapid cleaning. Low amp draw conserves batteries. No...
£89.95 inc VAT
Rule 35A Rule-a-Matic Bilge Pump Float Switch
Rule 35A Rule-a-Matic Bilge Pump Float Switch
Dimensions: 105mm long, 40mm wide, 110mm high (at max. lift) Maximum Current: 14 amp For automatic on/off bilge pump control. Switch design prevents rapid on/off cycling.
£26.50 inc VAT
 
Rule Super Switch Bilge Pump Float Switch
Rule Super Switch Bilge Pump Float Switch
Dimensions: 105mm long, 40mm wide, 110mm high (at max.lift) Maximum Current: 20 amp For automatic on/off bilge pump control. Switch design prevents rapid on/off cycling. Mercury Free
£34.95 inc VAT
Rule 40A Rule-a-Matic Plus Float Switch
Rule 40A Rule-a-Matic Plus Float Switch
Dimensions: 120mm long, 60mm wide, 90mm high. Maximum Current: 20 amp For automatic on/off bilge pump control. Fully integrated, impact resistant cover. High abrasion resistant wire. Manual test feature. Mercury Free
£29.95 inc VAT
Rule 3 Way Rocker Switch Bilge Pump Panel 12v
Rule 3 Way Rocker Switch Bilge Pump Panel 12v
3-Way Lighted Rocker Panel Switch Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic- off- or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position. Dimensions: 73mm wide, 60mm high Master control panel with 3-way switch...
£24.95 inc VAT
 
Rule 3 Way Rocker Switch Bilge Pump Panel 24v
Rule 3 Way Rocker Switch Bilge Pump Panel 24v
3-Way Lighted Rocker Panel Switch Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic- off- or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position. Dimensions: 73mm wide, 60mm high Master control panel with 3-way switch...
£24.99 inc VAT
Rule ECO Air Opperated Bilge Pump Switch 12v
Rule ECO Air Opperated Bilge Pump Switch 12v
ECO-Switch The Rule ECO-Switch is an ecologically sound automatic bilge pump control control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached to switch. This air pressure activates the switch which controls your pump. There are no moving internal parts, all wiring is out of the water, and there...
£44.95 inc VAT
Rule High Water Bilge Alarm 12v
Rule High Water Bilge Alarm 12v
Hi-Water Bilge Alarm The High Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85 db alarm. This unit allows an unmanned compartment to be constantly monitored. For additional compartments add additional Rule Float Switches. Complies with CFR 182.530 which requires a visual and audible alarm in each unmanned space on commercial...
£57.95 inc VAT
 
Rule High Water Bilge Alarm 24v
Rule High Water Bilge Alarm 24v
Hi-Water Bilge Alarm The High Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85 db alarm. This unit allows an unmanned compartment to be constantly monitored. For additional compartments add additional Rule Float Switches. Complies with CFR 182.530 which requires a visual and audible alarm in each unmanned space on commercial...
£59.95 inc VAT
Water Witch Electronic Bilge Pump Switch 12vWater Witch Electronic Bilge Pump Switch 12v
Water Witch Electronic Bilge Pump Switch 12v
The Water Witch 101, electronic bilge pump switch, is a small and versatile replacement for the commonly used float switch. The Water Witch 101 offers one of the easiest installations possible with its new tab design. Temperature, humidity, or electrical noise will not affect this switch. Mercury free Oils and fuels will not activate switch Simple installation, mounts at any angle Delay turning...
£35.99 inc VAT
Water Witch Electronic Bilge Pump Switch 24vWater Witch Electronic Bilge Pump Switch 24v
Water Witch Electronic Bilge Pump Switch 24v
The Water Witch 101, electronic bilge pump switch, is a small and versatile replacement for the commonly used float switch. The Water Witch 101 offers one of the easiest installations possible with its new tab design. Temperature, humidity, or electrical noise will not affect this switch. Mercury free Oils and fuels will not activate switch Simple installation, mounts at any angle Delay turning...
£49.99 inc VAT
 
Jabsco Wakeboard and Ski Boat Ballast pump 12 volt d.c
Jabsco Wakeboard and Ski Boat Ballast pump 12 volt d.c
Connections: - for 25mm (1”) bore hose or ½” BSP Dimensions: - 181mm long, 121mm wide, 92mm high Maximum Current: - 11.5(amps) Output: - up to 40 litres/minute (9 gallons/minute) Fills a typical 180 litre ballast tank in under 5 minutes Reversible to both fill and empty tanks Self-priming and non air-locking Bronze body, stainless steel shaft Packaged...
£229.00 inc VAT
Rule iL200 Plus Pump 12v
Rule iL200 Plus Pump 12v
A multi use pump suitable for water or diesel the iL200 Plus Pump, formerly the LVM Amazon has excellent performance and reliability. Centrifugal submersible and inline pump. Cable Length: 1(m) Connections: 1/2" (12.7mm) Hose Dimensions: 165mm long, 38mm diameter Maximum Current: 4.5 amps Output: up to 12.5 litres/minute at up to 1bar (3.3 gallons/minute at 14psi) Suitable for diesel,...
£29.95 inc VAT
Rule iL280 Plus Pump 12v
Rule iL280 Plus Pump 12v
A multi use pump suitable for water or diesel the iL280 Plus Pump, formerly the LVM Amazon has excellent performance and reliability. Centrifugal submersible and inline pump. Cable Length: 4(m) Connections: 1/2" (12.7mm) Hose Dimensions: 165mm long, 38mm diameter Maximum Current: 4.5 amps Output: up to 18 litres/minute at up to 1bar (4 gallons/minute at 14psi) Suitable for diesel, fresh and...
£39.95 inc VAT
 
Rule iL500 Plus Pump 12v
Rule iL500 Plus Pump 12v
A multi use pump suitable for water or diesel the iL500 Plus Pump, formerly the LVM Amazon has excellent performance and reliability. Centrifugal submersible and inline pump. Cable Length: 4(m) Connections: 3/4" (19mm) Hose Dimensions: 165mm long, 38mm diameter Maximum Current: 6 amps Output: up to 31.8 litres/minute at up to 1bar (7 gallons/minute at 14psi) Suitable for diesel, fresh and salt...
£49.95 inc VAT
Rule Pro Series Aerator Pump
Rule Pro Series Aerator Pump
12v 'C' Tournament Series Livewell Pump with Removeable Cartridge Connections: For Thru-Hull Applications Angled 102mm (4-3/4") Pickup Tube Discharge 28.58 mm (1-1/8" inch)Fuse Size: 6amp
£34.99 inc VAT
Attwood T500 Tsunami Livewell Aerator Kit
Attwood T500 Tsunami Livewell Aerator Kit
The Tsunami Recirq Kit recirculates livewell water to keep it cooler and rich in oxygen. This self-contained system feeds a separate aerator spray head and works even while you are underway and cannot use a thru-hull connection. Add this kit to any tank that already has freshwater fill system. Or use as a backup pump for a fail-safe system. Recirq Kit Includes: 500 GPH Tsunami aerator pump with...
£52.99 inc VAT
 
Syphon Pump 7ltr
Syphon Pump 7ltr
Suitable for the transfer of liquids including oil, petrol & water.
£9.99 inc VAT
Syphon Pump 16ltr
Syphon Pump 16ltr
Suitable for the transfer of liquids including oil, petrol & water. Suitiable for 45 gallon drums
£19.99 inc VAT
Superpump Syphon Pump
Superpump Syphon Pump
The Superpump siphon is a handy and cheap means to transfer water and diesel. Pump out quickly, easily and reliably - without electricity 2m flexible PVC tube Pump head made of copper, glass and stainless steel Protects users from poisonous or unpleasant chemicals Jiggle the Superpump valve in the liquid to start it flowing Transfer water, fuel or cleaning fluids
£11.95 inc VAT
 
Page: 1 | 2 | 3 |