Sail Handling
Sail handling boat equipment is primarily designed to make sail control and boat handling easier for the crew whether its inshore dinghy sailing, coastal leisure sailing or offshore yacht racing. Sheet winches, deck organisers, rope clutches and sailing reefing and furling can all help to make life on board a bit easier.
We source from the best and that includes, Spinlock, Barton, Profurl and Plastimo and we know from experience that this gives our customers the best options and opportunites to create a sail handling package that suits individual requirements.
Plastimo 406s Jib & Headsail Reefing System (Turnbuckle Mounting)
Jib & Headsail Reefing System
The smallest of the Plastimo jib reefing systems, the 406s, is designed for boats 4mtr to 6mtr (20ft), the 406s headsail reefing meets the needs for smaller yachts and trailer sailors is very easy to use and virtually maintenance free.
The Plastimo 406s is supplied as a kit and with a few basic tools is suitable for DIY installation, require no unstepping of...
Plastimo 609s Headsail Reefing System (Turnbuckle Mounting)
Headsail Reefing System
The Plastimo jib reefing system stems from 40 years of expertise in high-pressure injection and composite materials engineering.
Designed for 6 to 9 metre boats, the 609s headsail reefing meets the needs for small to medium sized yachts. Very easy to use and virtually maintenance free, the Plastimo jib reefing is an additional reliable crew member which will enhance your...
Plastimo 811s Headsail Reefing System
Headsail Reefing System
The Plastimo jib reefing system stems from 40 years of expertise in high-pressure injection and composite materials engineering.
Designed for 8 to 11 metre boats, the 811s headsail reefing meets the needs for small to medium sized yachts. Very easy to use and virtually maintenance free, the Plastimo jib reefing is an additional reliable crew member which will enhance your...
Spinlock RF/H Precision Headsail Luff Feeder
Luff Feeder
The RF/H sail feeder is designed to guide a flaked genoa from the deck cleanly into the foil.
It is suspended from a cord between the tack and the pre-feeder: this allows it to swivel freely following the luf during hoisting
Spinlock RF/MA Precision Mainsail Luff Feeder
Luff Feeder
The RF/MA mainsail feeder is fixed below the luff groove and is adjustable.
No drilling or riveting is required. #
The luff is protected by hard protected anodised alloy balls running freely on composite bushes mounted on a strong stainless steel casting.
Plastimo Halyard Diverter Wheel
Diverter Wheel
A halyard diverter wheel, which prevents the genoa halyard from twistingaround the spar.
Used if the angle between the halyard and the spar is inferior to 10°. - for a masthead rig
Stainless Steel Halyard Feeder for 406
Stainless Steel Halyard Feeder
For Plastimo 406 roller reefing. - for a masthead or fractional rig
Stainless steel halyard feeder for 608 & 810 roller reefing
Stainless steel halyard feeder
For 608 & 810 Plastimo roller reefing. - for a masthead or fractional rig.
Plastimo Additional Spar Package 1.5mtr (406s-608s-810s)
Additional spar package
1.50 m includes
1 alloy spar
1 plastic spar
1 quick-coupling sleeve with screws.
Barton 41130 Single Line Reefing Kit
The Barton Single Line Reefing kit makes reefing your mainsail a quick and easy operation - just lower the main to a predetermined mark on the halyard, tension the reefing line and re-trim the sail. Suitable for boats up to 9 metres in length. Supplied as boxed kit with all the parts and fixings required, together with full fitting instructions. All you need to provide is a line and a cleat or stopper....
Barton Slab Reefing Kit Yacht up to 8.5m (28ft)
Slab Reefing Kit#
Barton Slab Reefing Kits are supplied with sliding blocks which are held in place with spring-loaded plungers allowing fine tuning for both cruising and racing.
Manufactured from stainless steel and 'Spectro' anodised aluminium.
Supplied with 60cm of 25mmanodised 'T' track
Barton Slab Reefing Kit yacht up to 12m (39ft)
Slab Reefing Kit
Barton Slab Reefing Kits are supplied with sliding blocks which are held in place with spring-loaded plungers allowing fine tuning for both cruising and racing.
Manufactured from stainless steel and 'Spectro' anodised aluminium.
Supplied with 100cm of 32mm anodised 'T' track
Lewmar EVO 15ST One Speed, Self-Tailing Winch, Alloy Black
EVO SELF TAILING WINCHES
An evolution of the renowned Lewmar Ocean winch, the Evo self tailing winches draw on a wealth of design and manufacturing experience.You won't find much plastic here, Lewmar use high quality alloys and metal producing winches that offer exceptional efficiency, durability and strength to weight ratio.
Features
Easy Servicing - No tools required
User friendly direction...
Lewmar EVO 30ST Two Speed, Self-Tailing Winch, Alloy Black
EVO SELF TAILING WINCHES
An evolution of the renowned Lewmar Ocean winch, the Evo self tailing winches draw on a wealth of design and manufacturing experience.You won't find much plastic here, Lewmar use high quality alloys and metal producing winches that offer exceptional efficiency, durability and strength to weight ratio.
Features
Easy Servicing - No tools required
User friendly direction...
Lewmar Ocean Size 16 Two Speed, Standard Winch Alloy
Lewmar Ocean
The Lewmar No.16 sheet winch is suitable for dayboats and cruisers for winching sheets or mast mounted for halyards.
Two speed and the winch is available in a choice of two finishes, either Alloy or Chrome.
The Standard Winch is a high-quality, hard-wearing control solution.
The long glass-fibre reinforced, composite plastic stem is strong and light, while also providing efficient...
Lewmar Ocean Size 6 One Speed, Standard Winch Alloy
Lewmar Ocean
The Lewmar No.6 sheet winch is suitable for smaller dayboats and cruisers for winching sheets or mast mounted for halyards.
Single speed and compact the winch is available in a choice of two finishes, either Alloy or Chrome.
The Standard Winch is a high-quality, hard-wearing control solution.
The long glass-fibre reinforced, composite plastic stem is strong and light, while...
Barton 25mm Genoa Car with Plunger Stop
GENOA CARS WITH PLUNGER STOP:
Have precision turned Ertalyte sheaves running on large diameter centre boss to give friction free performance even under high load.
Sheaves are designed with a generous width which will accept two sheets.
The sheave axle is through bolted and riveted to give added strength and security.
L mm 80
W mm 42
H mm 87
Sheave Dia mm 40
Max Rope mm 2x12
Break Load kg...
Barton 25mm Stand up Block Genoa Car
Barton 25mm Stand up Block Genoa Car
All cars and sliders have moulded nylon inserts to ensure free, smooth running under load and prevent damage to finish or potential corrosion.
'Spectro' grey anodised finish
Stainless plunger stops with positive action
Moulded nylon slide inserts ensure free running
Large, easy-grip plunger knobs.
Barton Genoa "T" Track 25mm 0.6mtr
Barton 25mm Genoa "T" track system is fully adaptable with a choice of Genoa Cars, Track Slides and Plunger Stops.
Suitable for cruising and racing yachts, Barton Track is manufactured in the UK from high quality marine grade aluminium extrusion, finished in "Spectro" grey anodising.
Barton Genoa Cars and Sliders are compatible with most other types and makes of 25mm T track.
Track Dimensions:...
Barton Genoa "T" Track 25mm 1.2mtr
Barton 25mm Genoa "T" track system is fully adaptable with a choice of Genoa Cars, Track Slides and Plunger Stops.
Suitable for cruising and racing yachts, Barton Track is manufactured in the UK from high quality marine grade aluminium extrusion, finished in "Spectro" grey anodising.
Barton Genoa Cars and Sliders are compatible with most other types and makes of 25mm T track.
Track Dimensions:...
Barton Genoa "T" Track 25mm 1.8mtr
Barton 25mm Genoa "T" track system is fully adaptable with a choice of Genoa Cars, Track Slides and Plunger Stops.
Suitable for cruising and racing yachts, Barton Track is manufactured in the UK from high quality marine grade aluminium extrusion, finished in "Spectro" grey anodising.
Barton Genoa Cars and Sliders are compatible with most other types and makes of 25mm T track.
Track Dimensions:...
Barton Genoa "T" Track 25mm 2.4mtr
Barton 25mm Genoa "T" track system is fully adaptable with a choice of Genoa Cars, Track Slides and Plunger Stops.
Suitable for cruising and racing yachts, Barton Track is manufactured in the UK from high quality marine grade aluminium extrusion, finished in "Spectro" grey anodising.
Barton Genoa Cars and Sliders are compatible with most other types and makes of 25mm T track.
Track Dimensions:...
Barton "T" Track 25mm End Stop (pr.)
End Stop (pr.)
Plastic end caps for Barton 25mm "T" track.
Sold as a pair
Barton 32mm Genoa Car with Plunger Stop
GENOA CARS WITH PLUNGER STOP:
Have precision turned Ertalyte sheaves running on large diameter centre boss to give friction free performance even under high load.
Sheaves are designed with a generous width which will accept two sheets.
The sheave axle is through bolted to give added strength and security.
Barton 32mm Stand up Block Genoa Car
Barton 32mm Stand up Block Genoa Car
All cars and sliders have moulded nylon inserts to ensure free, smooth running under load and prevent damage to finish or potential corrosion.
'Spectro' grey anodised finish
Stainless plunger stops with positive action
Moulded nylon slide inserts ensure free running
Large, easy-grip plunger knobs.
Barton 32mm Genoa Slide with Plunger Stop
Genoa Slide
Barton 32mm Genoa slide with plunger stop has a heavy duty stainless steel attachment loop, through-bolted and riveted for extra strength.
***Limited ex display stock at reduced price***
Barton Spinnaker Pole Slide 32mm
Barton Spinnaker Pole Slide For Genoa 'T' Track 32mm
*** One only slight marked from display*** hence low price
Have a heavy duty stainless ring welded to the attachment plate.
This assembly is bolted to the slide.
The generous 40mm ring opening will accept most pole ends.
Length: 109mm
Width: 52mm
Height: 80mm
Internal Eye Dia: 40mm
Barton Genoa "T" Track 32mm 0.6 mtr
Barton 32mm Genoa "T" track system is fully adaptable with a choice of Genoa Cars, Track Slides and Plunger Stops.
Suitable for cruising and racing yachts, Barton Track is manufactured in the UK from high quality marine grade aluminium extrusion, finished in "Spectro" grey anodising.
Barton Genoa Cars and Sliders are compatible with most other types and makes of 32mm T track.
Track Dimensions:...
Barton Genoa "T" Track 32mm 1.2 mtr
Barton 32mm Genoa "T" track system is fully adaptable with a choice of Genoa Cars, Track Slides and Plunger Stops.
Suitable for cruising and racing yachts, Barton Track is manufactured in the UK from high quality marine grade aluminium extrusion, finished in "Spectro" grey anodising.
Barton Genoa Cars and Sliders are compatible with most other types and makes of 32mm T track.
Track Dimensions:...
Barton Genoa "T" Track 32mm 1.8 mtr
Barton 32mm Genoa "T" track system is fully adaptable with a choice of Genoa Cars, Track Slides and Plunger Stops.
Suitable for cruising and racing yachts, Barton Track is manufactured in the UK from high quality marine grade aluminium extrusion, finished in "Spectro" grey anodising.
Barton Genoa Cars and Sliders are compatible with most other types and makes of 32mm T track.
Track Dimensions:...
Barton Genoa "T" Track 32mm 2.4 mtr
Barton 32mm Genoa "T" track system is fully adaptable with a choice of Genoa Cars, Track Slides and Plunger Stops.
Suitable for cruising and racing yachts, Barton Track is manufactured in the UK from high quality marine grade aluminium extrusion, finished in "Spectro" grey anodising.
Barton Genoa Cars and Sliders are compatible with most other types and makes of 32mm T track.
Track Dimensions:...
Barton T Track 32mm End Stop (pr.)
Plastic end caps for Barton 32mm "T" track.
Sold as a pair
Wichard Boom Brake GybEasy
Wichard Boom Brake
Gybing remains one the of the most challenging operations of a sailing boat even for experienced sailors and could generate injuries and material damage.An effecient and safe solution is the Gyb'Easy Wichard Boom Brake.
Components:One Boom BrakeOne Shackle attached to the boom brake and one to the boom saddles.A specific line withstanding high frictions during the gybe operations.
Concept:With...
Barton Boomstrut up to 6 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiency
The boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing straightens...
Barton Boomstrut 6 - 7.5 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiencyThe boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing straightens...
Barton Boomstrut 7.5 - 9 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiency
The boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing...
Barton Boomstrut 9 - 10.5 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiency
The boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing...
Barton Boomstrut 10.5 - 12 mtrs
Barton Boomstrut Comes in five sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiency
The boomstrut's lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom.
Pulling the boom downwith a conventional kicker causes the Boomstrut to flex upwards; releasing...
Barton Lightweight Lazy Jack Kit for yachts up to 9mtr
Barton lightweight lazy jack kit for yachts up to 9mtr.
Allow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom.
These lines can be slackened whilst sailing to avoid restricting sail shape.
Ideal for use with fully battened or conventional mainsails, these complete kits contain stainless steel, plastic-coated wires...
Barton lazy jack kit for yachts up to 9mtr
Lazy Jack KitsAllow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.
Barton Cascade Lightweight lazy jack kit for yachts up to 10.5mtr
Lazy Jack KitsAllow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.
Barton lazy jack kit for yachts up to 12 m
Lazy Jack KitsAllow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.
Barton lazy jack kit for yachts over 12 m
Lazy Jack KitsAllow mainsails to be reefed or dropped with ease, by retaining the sail between lines running from the mast (near the hounds) to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape.
Barton Traveller 2:1 Purchase Kit Size 1
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)
Barton Traveller 2:1 Purchase Kit Size 2
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton Traveller 4:1 Purchase Kit Size 1
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
Barton Traveller 4:1 Purchase Kit Size 2
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
