Trailer Spares
5" V Trailer Roller
5" V Trailer Roller 125 x 19mm
5" Trailer Keel Roller
5" Trailer Keel Roller
125 x 19mm
8" Parallel Trailer Roller
8" Parallel Trailer Roller
200 x 55 x 16mm
8" V Trailer Roller
8" V Trailer Roller
200 x 19mm
6" Trailer Keel Block with Studs
6" Rubber Keel block for boat trailers, allows the keel of the boat to sit snug on the trailer when towing.
The block has two threaded studs for fixing to trailer chasis.
4" Dumb-Bell side Roller
Dumb-Bell side Roller
Bracket for 5" V or Keel Roller
Bracket for 5" V or Keel Roller
Bracket for 8" V or Keel Roller
Bracket for 8" V or Keel Roller
25mm x 3 Mtr Roof Rack/General Purpose Strapping
Corrosion resistant buckle.
Overstitched for security. Safe Working Load: 300kg
Sold in Pairs
25mm x 5 Mtr Roof Rack/General Purpose Strapping
Corrosion resistant buckle.
Overstitched for security. Safe Working Load: 300kg
Sold in Pairs
25mm x 3 Mtr Trailer Tie Down/Personal Water-Craft Strap
Corrosion resistant hook and ratchet. Overstitched for security. Supplied singly. Safe Working Load: 350kg
25mm x 5 Mtr Trailer Tie Down/Personal Water-Craft Strap
Corrosion resistant hook and ratchet. Overstitched for security. Supplied singly. Safe Working Load: 350kg
50mm x 5 Mtr Overcentre Tie-Down Strap (Dinghies, etc.)
Corrosion resistant hook and clip. Overstitched for security. Supplied singly. Safe Working Load.
50mm x 7 Mtr Overcentre Tie-Down Strap (Dinghies, etc.)
Corrosion resistant hook and clip. Overstitched for security. Supplied singly. Safe Working Load.
50mm x 5 Mtr Ratchet Trailer Tie-Down (Sportsboats, etc.)
Corrosion resistant hook and ratchet. Overstitched for security. Supplied singly. Safe Working Load 1000kg
50mm x 7 Mtr Ratchet Trailer Tie-Down (Sportsboats, etc.)
Corrosion resistant hook and ratchet. Overstitched for security. Supplied singly. Safe Working Load 1000kg
Jockey Wheel + Shaft 35mm Solid Tyre + Clamp
Light weight trailer jockey wheel with height adjusting 35mm dia shaft suitable for small equipment, jet ski, dinghy trailers, 160mm diameter solid tyre + Clamp. All data above is given as recommendation only, customers must satisfy themselves as to suitability.
Jockey Wheel + Shaft 42mm Solid Tyre Inc Clamp
Trailer jockey wheel suitable for boat trailers, equipment trailers and light industrial trailers up to 1.5T with height adjusting 42mm dia. shaft, 200mm diameter solid tyre, including clamp. All data above is given as recommendation only, customers must satisfy themselves as to suitability.
Jockey Wheel + Shaft 48mm Solid Tyre No Clamp
We supply two versions of this trailer jockey wheel. Medium duty up to 1.5T suitable for lighter trailers carrying RIBS, sailing dinghies and small sports boats. Supplied with height adjusting 48mm dia shaft, 200mm x 50mm solid tyre and clamp. Heavy duty suitable for boat trailers, sports boats, trailer sailors and industrial plant trailers up to 2.5T. Supplied with height adjusting 48mm dia...
Pneumatic Tyre Jockey Wheel & Clamp
Pneumatic Tyre Jockey Wheel & Clamp Size: 260mm diameter tyre, 48mm shaft
Trailer Jockey Wheel Clamp
Trailer jockey wheel clamp available in 3 sizes to suit 35mm, 42mm and 48mm dia shaft.
36" Trailer Lighting Board 4 Mtr Cable
Strong PVC trailer lighting board with regulation lights, reflectors and are fitted with cable and 7 pin plug.
The 36" trailer lighting board has a 4mtr 7 core cable and does not have fixing holes.
48" Trailer Lighting Board 7 Mtr Cable
Strong PVC trailer lighting board with regulation lights, reflectors and are fitted with cable and 7 pin plug.
The 48" trailer lighting board has 7mtr of 7 core cable and pre-drilled holes for securing to boat or trailer.
54" Trailer Lighting Board with Fog light
Strong PVC trailer lighting board with regulation lights, reflectors and are fitted with cable and 7 pin plug.
The 54" trailer lighting board has 7mtr of 7 core cable and pre-drilled holes for securing to boat or trailer plus a foglight.
Pre-wired 7 pin socket on mounting plate
Pre wired 7 pin socket
with mounting plate
Sea Searcher Recovery Magnet
An invaluable tool to have onboard this magnet has the capacity of lifting 64kg (140lb) for rescuing items dropped overboard. By using the specially designed plates that channel the magnet strength to one contact point it produces excellent magnetic strength.
With its design, when it is in storage,it is completely 'compass safe' at six feet. This means you can store the magnet anywhere onboard so...
250 kilo Trailer Suspension Units (pair) Without Hubs
Trailer suspension units without hubs.
350 Kilo Trailer Suspension Units (pair) Without Hubs
Trailer suspension units without hubs.
4" PCD Trailer Tapered Hub & Bearings
Tapered Hub & Bearings
1" taper hub assembly.
Cast body with grease nipple.
4 studs, 4" PCD.
Sold individually
550 Kilo Trailer Suspension Units (pair) Without Hubs
Trailer suspension units without hubs.
750 Kilo Trailer Suspension Units (pair) Without Hubs
Trailer suspension units without hubs.
Lightweight Pressed Trailer Coupling
Trailer coupling
Couples quickly and securely to 50mm tow balls.
Suitable for most lightweight, unbraked trailers.
Accepts integral Brass security lock to prevent the trailer being unhitched from a tow ball.
Manufactured from pressed steel and bright plated to resist corrosion.
Fully approved to European Directive 94/20EC for road use.
Cast Trailer Coupling
Trailer coupling
Unbraked Trailer Coupling
Heavy Duty
Trailer Hitch
To connect to 50mm Towball
50mm E.C Approved Tow Ball
Towball
.50mm Forged Tow Ball. 90mm Hole Centres. Zinc Plated,
Universal 50mm Tow Ball & Pin
Towball & Pin
Universal 50mm ball and 25mm pin with retaining clip
PVC Tow Ball Cover
PVC Tow Ball Cover
Stops grease and dirt getting on your clothing
Dutton Lainson Manual Trailer Pulling Winch DL900LB
The Dutton Lainson 900 lb winch for horizontal pulling applications.
High carbon steel gears, permanently lubricated bearings, ergonomic handle grip.
Zinc TUFFPLATE finish. Handle included.
Dutton Lainson Manual Trailer Pulling Winch DL1100LB
Dutton Lainson 1100 lb winch for horizontal pulling applications.
High carbon steel gears, permanently lubricated bearings, ergonomic handle grip.
Zinc TUFFPLATE finish. Handle included.
Dutton Lainson Manual Trailer Pulling Winch DL1402LB
Dutton Lainson 1400 lb winch for horizontal pulling applications.
High carbon steel gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip.
Zinc TUFFPLATE finish. Handle included.
Dutton Lainson Manual Trailer Pulling Winch DL1602LB
Dutton Lainson 1600 lb winch for horizontal pulling applications.
High carbon steel gears, permanently lubricated bearings, reversible ratchet, ergonomic handle grip.
Zinc TUFFPLATE finish. Handle included.
6.1 m/20 ft Winch Strap with Hook
20 foot winch strap with hook, with breaking strength of 2600 lbs, for winches up to 1600 lbs (strap rating must be 150% of winch rating). 50 mm/2 inch width, includes mounting hardware.
8" Plastic Trailer Mudguard
Black plastic mudguard,
suits 8" wheels,
single axle trailers.
Sold individually
10" Plastic Trailer Mudguard
Black plastic mudguard,
suits 10" wheels,
single axle trailers.
Sold individually
Sandhopper Solid Trolley Wheel
Sandhopper solid trolley wheel
Trolley wheel with solid rubber tyre & tough red plastic inner wheel that will not rust or rot.• 25mm diameter axle.• Tyre Diameter: 255mm• Tyre Width: 95mm
Pneumatic Trolley Wheel
Pneumatic Trolley Wheel
• Fits a 25mm diameter axle.
• Tyre Diameter: 385mm
• Tyre Width: 95mm
• Bearing Width: 66mm
400 x 8 Trailer Wheel & Tyre
Trailer WheelRoad trailer wheel with 4-ply high speed pneumatic tyre.
PCD: 4 studs on 4”
400 x 8 Trailer Wheel & Tyre
500 x 10 6 Ply Trailer Tyre & Rim
Trailer WheelRoad trailer wheels with 6-ply high speed pneumatic tyre.
PCD: 4 studs on 4”
500 x 10 trailer 6 Ply tyre & rim for heavier loads.