Aquafax
Grid
List
Water Lubricated Shaft Cutlass Bearing 25mm x 40mm x 100mm
Cutlass Bearing
Shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell.
The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads.
The bearings support the shaft...
Water Lubricated Shaft Cutlass Bearing 30mm x 45mm x 120mm
Cutlass Bearing
Shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell.
The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and hig h loads.
The bearings support the...
Heavy Duty Stainless Steel Hose Clamp 48-51mm (40mm hose)
Heavy duty stainless steel hose clamps for use with marine exhaust hose.
Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
Suitable for 40mm wire reinforced marine exhaust hose
Hose Clamp 48-51mm
Heavy Duty Stainless Steel Hose Clamp 52-55mm (45mm hose)
Heavy duty stainless steel hose clamps for use with marine exhaust hose.
Using a socket or a screw driver, these are the only suitable clamps for exhaust hose as the clamps will tighten down on the wire reinforced hose giving a secure fixing.
Suitable for 45mm wire reinforced marine exhaust hose
Hose Clamp 52-55mm
Heavy Duty Stainless Steel Hose Clamp 60-63mm (50mm hose)
Heavy duty stainless steel hose clamps for use with marine exhaust hose.
Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
Suitable for 50mm wire reinforced marine exhaust hose
Hose Clamp 60-63mm
Heavy Duty Stainless Steel Hose Clamp 68-73mm (63mm hose)
Heavy duty stainless steel hose clamps for use with marine exhaust hose.
Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
Suitable for 63mm wire reinforced marine exhaust hose
Hose Clamp 68-73mm
Heavy Duty Stainless Steel Hose Clamp 86-91mm (75mm hose)
Heavy duty stainless steel hose clamps for use with marine exhaust hose.
Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
Suitable for 75mm wire reinforced marine exhaust hose
Hose Clamp 86-91mm
Grease Cup 1/8' BSP x 33mm
Grease Cup
“Stauffors” type grease cups in hot stamped brass suitable for stern tube lubrication or other onboard applications.
For best performance, once installed pack tightly with white marine grease.
Grease Cup Sizing:
BSP Male Thread Size x O/A Dia. x Max Height
1/8' x 33mm x 40mm
Grease Cup 1/4 BSP 40mm OD
Grease Cup
“Stauffors” type grease cups in hot stamped brass suitable for stern tube lubrication or other onboard applications.
For best performance, once installed pack tightly with white marine grease.
Grease Cup Sizing:
BSP Male Thread Size x O/A Dia. x Max Height
1/4' x 40mm x 42mm
75mm Woven Exhaust Lagging - 30m roll
GLASS FIBRE WOVEN TAPE
Suitable for exhaust systems
Fire proof. Temperature resistant to 550°C
Good thermal and acoustic insulation
Excellent chemical resistance
Retains shape, non water absorbent.
30m roll
Marine Engine Exhaust Waterlock Silencer
Waterlock silencer manufactured of high quality plastic suitable for marine use and boat engines, this model of exhaust waterlock silencer is suitable for 40, 45 & 50mm diameter exhaust hose.
Installed within the exhaust system it will dramatically reduce noise
40mm/45mm/50mm Hose Connection
Size: 640L x 225W x 230H
Inline Plastic Diesel Filter 6/8mm Hose
Diesel Filter
Inline Plastic Diesel Filter 6/8mm Hose 2000 cc max
Easy to fit with suitable hose clips
Engine Fuel Water Separator
Water and contaminants accumulating in the fuel tank can often cause engine failure, this can be solved by using a combination fuel water separator which allows the water droplets to drain off in to the clear plastic bowl.
Suitable diesel engines up to 200hp.
The separator filter has an aluminium head unit with replacable fuel filter and a transparent plastic water bowl.
Supplied with a drain plug.
Fuel...
Diesel Filter M14x1.5 Thread with Metal Bowl & Plug
Single fuel filter with metal settling bowl making it suitable for inland waterways craft and bleed screw complete with interchangeable cartridge for engine max 3500cc.
Capacity 50 LPH
Metric Thread connections
Fuel Fitting connections sold seperately
Engine Fuel Water Separator Replacement Filter
Replacement Filter
Standard filter cartridge for CAV filter heads resistant to corrosion and used on many marine engines.
Engine Fuel Water Separator Hose Connection Kits
Hose Connection Kit
Fuel line connections
Connections: M14 x 1.5 female thread
9Ltr Oil Drain Container
Heavy Duty 9Ltr Plastic Oil Drain Container
Re-usable plastic oil drain can, ideal for safe and clean oil sump drain. Simply drain off engine oil in to the container, secure the cap and dispose responsibly.
Dimensions: (H x W x D) 39 x 29 x 12.5cm
30mm Sound Proof Insulation Foam 1m x 0.6m
Designed for boat engine rooms, the reinforced foil faced (oil and tear resistant) laminated acoustic barrier foam is basically non-combustible and meets ISO 9094 of the recreational craft directive.
It is to the highest rating (zero) of the fire retardant requirement of BS476 Part 6 and 7.
Sheet Size: 1.0 x 0.6mtr
30mm thick
Fixings not included, check compatibility before using adhesives.
This...
Morris K99 Water Resistant Stern Tube Grease 500g
K99 WATER RESISTANT GREASE
APPLICATION:
Specially designed by Morris to feed evenly around the propeller shaft in the stern tube.
PERFORMANCE:
Outstanding water resistance qualities providing excellent protection of parts from corrosion and has good sealing properties.
Physical Characteristics
Appearance: Light Brown Smooth Grease
NLGI: 2/3
Operating Temp Range: -20ºC to...
Battery Terminals Screw fixing up to 40mm² Cable
Battery Terminal screw fixing for cable up to 40mm².
Sold in pairs (ie. 1 x +ve, 1 x -ve)
Battery Terminals Screw fixing up to 60mm² Cable
Battery Terminal screw fixing for cable up to 60mm².
Sold in pairs (ie. 1 x + ve, 1 x - ve)
Battery Terminals Screw fixing up to 70mm² Cable
Battery Terminal screw fixing for cable up to 70mm².
Sold in pairs (ie. 1 x + ve, 1 x - ve)
Battery Terminals M8 Stud & Wing Nut
Battery Terminal with M8 stud post and wing nut.
Sold in pairs (ie. 1 x +'ve, 1 x -'ve)
Tinned Copper Tube Stud Terminals 16mm² Cable
Tinned Copper tube stud terminals with inspection hole, suitable for crimping or soldering.
16mm/sq cable
Select 6mm or 8mm dia. stud
Sold in single
Tinned Copper Tube Stud Terminals 25mm² Cable
Tinned Copper tube stud terminals with inspection hole, suitable for crimping or soldering.
25mm/sq cable
Select 8mm or 10mm dia. stud
Sold in single
Tinned Copper Tube Stud Terminals 35mm² Cable
Tinned Copper tube stud terminals with inspection hole, suitable for crimping or soldering.
35mm/sq cable
Select 8mm or 10mm dia. stud
Sold in single
Tinned Copper Tube Stud Terminals 50mm² Cable
Tinned Copper tube stud terminals with inspection hole, suitable for crimping or soldering.
50mm/sq cable
Select 8mm or 10mm dia. stud
Sold in single
Tinned Copper Tube Stud Terminals 70mm² Cable
Tinned Copper tube stud terminals with inspection hole, suitable for crimping or soldering.
70mm/sq cable
Select 8mm or 10mm dia stud
Sold in single
Crimp Pre Insulated Butt Connectors
High quality pre insulated terminals.
Manufactured from tinned copper complete with anti vibration rings (except forks & rings)
Red Insulation: Conductor size 0.5-1.5mm² / 22-16awg
Blue Insulation: Conductor size 1.5-2.5mm² / 16-14awg
Yellow Insulation: Conductor size 4.0-6.0mm² / 12-10awg
Sold in a packs of 10
Crimp Pre Insulated Ring Terminals
High quality pre insulated terminals, manufactured from tinned copper complete with anti vibration rings (except forks & rings)
Red Insulation: Conductor size 0.5-1.5mm² / 22-16AWG
Blue Insulation: Conductor size 1.5-2.5mm² / 16-14AWG
Yellow Insulation: Conductor size 4.0-6.0mm² / 12-10AWG
Sold in a packs of 10
Crimp Pre Insulated Male Tab Terminals
High quality pre insulated terminals. All the terminals are manufactured from tinned copper complete with anti vibration rings (except forks & rings)
Red Insulation: Conductor size 0.5-1.5mm² / 22-16AWG
Blue Insulation: Conductor size 1.5-2.5mm² / 16-14AWG
Yellow Insulation: Conductor size 4.0-6.0mm² / 12-10AWG
Sold in a pack of 10
Crimp Full Insulated Female Spade Terminals
High quality pre insulated terminals. All the terminals are manufactured from tinned copper complete with anti vibration rings (except forks & rings)
Red Insulation: Conductor size 0.5-1.5mm² / 22-16AWG
Blue Insulation: Conductor size 1.5-2.5mm² / 16-14AWG
Yellow Insulation: Conductor size 4.0-6.0mm² / 12-10AWG
Sold in a pack of 10
Tinned 2 Core 1.5mm² 16AWG Flexible Cable
1.5mm/sq, tinned 2 core cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion...
Tinned 2 Core 2.5mm² 14AWG Flexible Cable
2.5mm/sq, tinned 2 core cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion...
Tinned 3 Core 1.5mm² 16AWG Flexible Cable
1.5mm/sq, tinned 3 core cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion...
Non-Tinned 3 Core 1.5mm² 16AWG Flexible Cable
1.5mm/sq, Non-Tinned 3 core cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications:
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable for use at temperatures -40ºC to...
Tinned Single Core Thin Wall Cable 1.5mm² 16AWG
1.5mm/sq, tinned single core cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
Tinned Single Core Thin Wall Cable 2.5mm² 14AWG
2.5mm/sq, tinned single core cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
Tinned Single Core Thin Wall Cable 4.0mm² 12AWG
4.0mm/sq, tinned single core cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
Tinned Single Core Thin Wall Cable 6.0mm² 10AWG
6.0mm/sq, tinned single core cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
Tinned Single Core Thin Wall Cable 10.0mm² 8AWG
10.0mm/sq, tinned single core cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
Tinned Battery Cable 16mm² 6AWG
16mm/sq, tinned battery cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
Tinned Battery Cable 25mm² 4AWG
25mm/sq, tinned battery cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
Tinned Battery Cable 35mm² 2AWG
35mm/sq, tinned battery cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
Tinned Battery Cable 50mm² 1/0AWG
50mm/sq, tinned battery cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
Tinned Battery Cable 70mm² 2/0AWG
70mm/sq, tinned battery cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
Outboard Motor Bolt Lock
Outboard Engine Security Bolt Lock
Secure your outboard engine to the transom by installing the stainless steel key operated bolt lock on one of the existing mounting bolts. Most insurance companies would recommend this type of product for larger horsepower engines which are unlikly to be removed for storage.
Body made of S/S 303 with Brass lock
Supplied with PVC lock protection cover and...