TruDesign
Grid
List
TruDesign Composite Ball Valve
TruDesign Ball Valves Composite Ball Valves
Fully approved and manufactured in New Zealand for use in marine applications above and below the water line.
The bodies of these valves are moulded in a glass reinforced nylon composite material providing high impact and tensile strength, resulting in a light weight unit, free from corrosion and electrolysis. The internal workings are moulded in a...
TruDesign Load Bearing Collar
These are designed for use with TruDesign Skin Fittings and Ball Valves. The Collar enables compliance to ABYC H-27 standard for the entire assembly.
Small for ½”, ¾” or 1″ sizes
Medium for 1¼” or 1½” sizes
Large for 2″ size
Features:
ABYC H-27 compliance for ¾”, 1”, 1¼”, 1½”,...
TruDesign Domed Skin Fitting Black
Suitable for underwater use, TruDesign range of Skin Fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2.
They also comply with ABYC H-27 500Lb standard when used in conjunction with th Trudesign collar.
Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. High strength,...
TruDesign Domed Skin Fitting White
Suitable for underwater use, TruDesign range of Skin Fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2.
They also comply with ABYC H-27 500Lb standard when used in conjunction with th Trudesign collar.
Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. High strength,...
TruDesign Composite Straight Hose Tail
TruDesign Hosetails are moulded using a glass-reinforced nylon composite.The high strength, high-modulus glass fibres within the nylon composite provides more than adequate strength, and are designed to resist the hose grip crushing.
TruDesign Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tail fittings are designed for use with two hose clips.
Manufactured...
TruDesign Composite 120º Hose Tail
TruDesign Hosetails are moulded using a glass-reinforced nylon composite.The high strength, high-modulus glass fibres within the nylon composite provides more than adequate strength, and are designed to resist the hose grip crushing.
TruDesign Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings. Tail fittings are designed for use with two hose clips.
Manufactured...
