• display as grid Grid
  • display as list List
Page: 1 | 2 |

Jabsco 14609-0001B Impeller
Jabsco 14609-0001B Impeller Suitable for pump 9040-0511 used on Petter AB1W Inboard Engine
£61.20 £39.95
Jabsco SK221 Pump Service Kit For 9430 Series
Jabsco SK221 Pump Service Kit For 9430 Series
For Jabsco pump 9430 UK 10 1/4' BSP Flange • Exhaust Cooling SK221 1126 4528-0001 SP2701-09 SP1002-01

PSP Leak Stop Kit 50mm x 1.5m
PSP Leak Stop Kit 50mm x 1.5m
Leak Stop is an industrial strength, epoxy based pipe and hose repair kit which sets like steel for temporary or permanent repairs to virtually any surface. Can be sanded & painted. Ideal for plumbing or engine pipe repairs on board. Contains: Fibreglass bandage, epoxy stick & protective latex gloves.
£24.50

Jabsco Pump Impeller 1210-0001-P
Jabsco Pump Impeller 1210-0001-P
The Jabsco Impeller Kit 1210-0001P includes a neoprene impeller with a spline drive plus popular gaskets and lubricant to help replace your old engine water pump impeller. Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. This Jabsco impeller can be used as a substitute for the following impellers: Johnson:...
£31.05
Jabsco Pump Impeller 1414-0001-P
Jabsco Pump Impeller 1414-0001-P
Jabsco Pump Impeller The Jabsco 1414-0001P impeller kit includes a neoprene impeller with a single flat drive plus popular gaskets and lubricant to help replace your old engine water pump impeller. Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Drive Type Single Flat Drive Blades 6 Profile A Material Neoprene Diameter 32mm...
£24.85

Jabsco Pump Impeller 17937-0001-P
Jabsco Pump Impeller 17937-0001-P
Jabsco Pump Impeller The Jabsco 17937-0001P impeller kit includes a neoprene impeller with a spline drive plus popular gasket and lubricant to help replace your old engine water pump impeller. Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. This Jabsco impeller can be used as a substitute for the...
£36.05
Jabsco Pump Impeller 18777-0001-P
Jabsco Pump Impeller 18777-0001-P
Jabsco Impeller 18777-0001 Jabsco Flexible Neoprene Impeller Kit with assorted gaskets Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
£39.75

Jabsco Pump Impeller 21414-0001-P
Jabsco Pump Impeller 21414-0001-P
Jabsco Pump Impeller Jabsco flexible Impeller 21414-0001P rubber engine water pump impeller with a single flat drive and six blades to replace your old engine water pump impeller. Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco impellers can be used as substitutes for the following: Yanmar:...
£24.85
Jabsco Pump Impeller 22405-0001-P
Jabsco Pump Impeller 22405-0001-P
Jabsco Pump Impeller The Jabsco 22405-0001P impeller kit includes a neoprene impeller with a slotted shaft pin drive plus popular gaskets and lubricant to help replace your old engine water pump impeller. Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. This Jabsco impeller can be used as a substitute...
£24.85

Jabsco Pump Impeller 4568-0001-P
Jabsco Pump Impeller 4568-0001-P
Jabsco Pump Impeller The Jabsco 4568-0001P impeller kit includes a neoprene impeller with a key drive plus a popular gasket to help replace your old engine water pump impeller. The Jabsco impeller can be used as a substitute for the following: Johnson: 09-801B Volvo: 831182, 875575-3 Yanmar: 14541046090 CEF: 500108 Drive Type Key Drive Blades 12 Profile K Material Neoprene Diameter 57mm...
£38.50
Jabsco Pump Impeller 6303-0001P
Jabsco Pump Impeller 6303-0001P
Jabsco Pump Impeller The Jabsco 6303-0003P impeller kit includes a nitrile impeller suitable for pumping water, oil and toilet waste material, it features a single flat drive plus popular gaskets and lubricant to help replace your old pump impeller. Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco...
£27.35

Jabsco Pump Impeller 653-0001-P
Jabsco Pump Impeller 653-0001-P
Jabsco Pump Impeller The Jabsco 653-0001P impeller kit includes a neoprene impeller with a slotted shaft pin drive and popular gaskets and lubricant to help replace your old engine water pump impeller. Jabsco impellers can be used as a replacement or substitute for the following: Johnson: 09-810B Vetus: IMP00701 CEF: 500101 Drive Type Slotted Shaft Pin Drive Blades 6 Profile G Material Neoprene Diameter 51mm...
£24.85
Jabsco Pump Impeller 673-0001-P
Jabsco Pump Impeller 673-0001-P
Jabsco Pump Impeller The Jabsco 673-0001P impeller kit includes a neoprene impeller with a pin drive and and popular gaskets and lubricant to help replace your old engine water pump impeller. Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco impellers can be used as a replacement or sustitute...
£34.80

Jabsco Pump Impeller 920-0001-P
Jabsco Pump Impeller 920-0001-P
Jabsco Pump Impeller The Jabsco 920-0001P impeller kit includes a neoprene impeller with a spline drive plus a popular gasket and lubricant to help replace your old engine water pump impeller. Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco impellers can be used as replacement or substitute...
£36.05
Jabsco Pump Impeller Removal Tool 50070-0040
Jabsco Pump Impeller Removal Tool 50070-0040
Removal Tool Impeller removal tool: 040/080/120 size pumps Makes the removal of impellers easy and safe Impeller diameters up to 65mm (2 9/16')
£79.95

Engine Cooling Water Inlet Strainer
Sale
Engine Cooling Water Inlet Strainer
Engine Water Inlet Strainer with mounting bracket Engine inlet water strainer with plastic body and a stainless steel filter. The clear removable cover allows easy access to clean the filter gauze. This smaller engine water strainer has a built in side mount bracket, and can be used for 3/4', 1' and 1-1/4' hoses. Max flow rate is 150 litres per minute.

5

£32.88 from £29.95
Vetus NLP50 Waterlock
Sale
Vetus NLP50 Waterlock
NLP50 Waterlock To compliment the well known and proven range of LP waterlocks, VETUS has now introduced several new models, type NLP, made of injection-moulded plastic materials. These have the benefits of being durable, corrosion proof and light in weight. The new NLP waterlocks are of dual stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube through...
£195.00 £179.00

Grease Cup 1/8' BSP x 25mm
Grease Cup “Stauffors” type grease cups in hot stamped brass suitable for stern tube lubrication or other onboard applications. For best performance, once installed pack tightly with white marine grease. Grease Cup Sizing: BSP Male Thread Size x O/A Dia. x Max Height 1/8"BSP x 25mm x 30mm
£14.60 £8.50
Heavy Duty Engine Inlet Water Strainer
Sale
Heavy Duty Engine Inlet Water Strainer
Engine inlet water strainer with plastic body and stainless steel filter. This larger model has a max flow rate 300 litres per minute and has two 1-1/2' BSP female ports. Varying sizes of hose tail can be used on this water strainer and these can be found in the water section of this website. Dimensions: H180mm x Dia.190mm Supplied with aluminium mounting bracket
£71.64 £67.95

Bulkhead Mounted Engine Water Strainer - 1"BSP
Bulkhead Mounted Engine Water Strainer - 1"BSP
Bulkhead mounted engine water strainer with clear polycarbonate lid. Size: H145mm x W151mm Thread: 1" BSP Parallel Nickel plated Bronze body Vertical inlet & horizontal outlet AISI 316L S/S filter basket Transparent polycarbonate top Approved by R.I.N.A. Flow Rate: @ 0.1Bar 7950 Flow Rate: @ 1bar 25500
£169.00
Bulkhead Mounted Engine Water Strainer - 1-1/4"BSP
Bulkhead Mounted Engine Water Strainer - 1-1/4"BSP
Bulkhead mounted engine water strainer with clear polycarbonate lid. Size: H168mm x W167mm Thread: 1-1/4" BSP Parallel Nickel plated Bronze body Vertical inlet & horizontal outlet AISI 316L S/S filter basket Transparent polycarbonate top Approved by R.I.N.A. Flow Rate: @ 0.1Bar 12100 Flow Rate: @ 1bar 38200
£210.00

Bulkhead Mounted Engine Water Strainer - 1-1/2"BSP
Bulkhead Mounted Engine Water Strainer - 1-1/2"BSP
Bulkhead mounted engine water strainer with clear polycarbonate lid. Size: H178mm x W180mm Thread: 1-1/2" BSP Parallel Nickel plated Bronze body Vertical inlet & horizontal outlet AISI 316L S/S filter basket Transparent polycarbonate top Approved by R.I.N.A. Flow Rate: @ 0.1Bar 19100 Flow Rate: @ 1bar 61250
£225.00
Bulkhead Mounted Engine Water Strainer - 2"BSP
Bulkhead Mounted Engine Water Strainer - 2"BSP
Bulkhead mounted engine water strainer with clear polycarbonate lid. Size: H215mm x W213mm Thread: 2" BSP Parallel Nickel plated Bronze body Vertical inlet & horizontal outlet AISI 316L S/S filter basket Transparent polycarbonate top Approved by R.I.N.A. Flow Rate: @ 0.1Bar 30000 Flow Rate: @ 1bar 96200
£330.00

Bulkhead Water Strainer Brackets
Bulkhead Water Strainer Brackets
L - shaped mounting brackets for fitting of bulkhead strainers. 304 stainless steel Drilled with fasteners for connection to strainer Larger strainers require double L Bracket Kit
from £20.00
Water Lubricated Cutlass Shaft Bearing 1.625" x 2.25" x 6.5"
The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft and at the same time assist the flow of water into the bearing, providing lubrication exactly where it is needed. The profile of the grooves is specially...
£119.00 £89.00

Water Lubricated Shaft Cutlass Bearing 3/4 x 1-1/4 x 3
Water Lubricated Shaft Cutlass Bearing 3/4 x 1-1/4 x 3
Cutlass Bearing Shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£45.95
Water Lubricated Shaft Cutlass Bearing 1 x 1-3/8 x 4
Water Lubricated Shaft Cutlass Bearing 1 x 1-3/8 x 4
Cutlass Bearing shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£80.95

Water Lubricated Shaft Cutlass Bearing 1 x 1-1/2 x 4
Water Lubricated Shaft Cutlass Bearing 1 x 1-1/2 x 4
Cutlass Bearing Shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£51.95
Water Lubricated Shaft Cutlass Bearing 1-1/4 x 1-3/4 x 5
Water Lubricated Shaft Cutlass Bearing 1-1/4 x 1-3/4 x 5
Cutlass Bearing Shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£58.95

Water Lubricated Shaft Cutlass Bearing 1-1/2 x 2 x 6
Water Lubricated Shaft Cutlass Bearing 1-1/2 x 2 x 6
Cutlass Bearing Shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£73.95
Water Lubricated Shaft Cutlass Bearing 25mm x 40mm x 100mm
Water Lubricated Shaft Cutlass Bearing 25mm x 40mm x 100mm
Cutlass Bearing Shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft...
£54.95

Water Lubricated Shaft Cutlass Bearing 30mm x 45mm x 120mm
Water Lubricated Shaft Cutlass Bearing 30mm x 45mm x 120mm
Cutlass Bearing Shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and hig h loads. The bearings support the...
£58.95
6mm A1 Marine Fuel Hose
6mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr For stainless steel hose clips see Water Systems section of the Catalogue
£4.75

8mm A1 Marine Fuel Hose
8mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr For stainless steel hose clips see Water Systems section of the Catalogue
£5.20
10mm A1 Marine Fuel Hose
10mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr For stainless steel hose clips see Water Systems section of the Catalogue
£6.10

12.5mm A1 Marine Fuel Hose
12.5mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr For stainless steel hose clips see Water Systems section of the Catalogue
£8.95
16mm A1 Marine Fuel Hose
16mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr For stainless steel hose clips see Water Systems section of the Catalogue
£9.95

19mm A1 Marine Fuel Hose
19mm A1 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr For stainless steel hose clips see Water Systems section of the Catalogue
£12.95
38mm A2 Marine Fuel Hose
38mm A2 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr For stainless steel hose clips see Water Systems section of the Catalogue
£24.95

50mm A2 Marine Fuel Hose
50mm A2 Marine Fuel Hose
Marine Fuel Hose EN ISO7840 marine fuel hose abrasion resistant with a temp range -35degC to +100degC A1 is also oil resistant suitable for most applications including vent breather A2 features twin wire helix reinforcement suitable for fuel tank filler price per mtr For stainless steel hose clips see Water Systems section of the Catalogue
£31.95
Heavy Duty Stainless Steel Hose Clamp 48-51mm (40mm hose)
Heavy Duty Stainless Steel Hose Clamp 48-51mm (40mm hose)
Heavy duty stainless steel hose clamps for use with marine exhaust hose. Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing. Suitable for 40mm wire reinforced marine exhaust hose Hose Clamp 48-51mm
£7.99

Heavy Duty Stainless Steel Hose Clamp 52-55mm (45mm hose)
Heavy Duty Stainless Steel Hose Clamp 52-55mm (45mm hose)
Heavy duty stainless steel hose clamps for use with marine exhaust hose. Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing. Suitable for 45mm wire reinforced marine exhaust hose Hose Clamp 52-55mm

5

£8.10
Heavy Duty Stainless Steel Hose Clamp 60-63mm (50mm hose)
Heavy Duty Stainless Steel Hose Clamp 60-63mm (50mm hose)
Heavy duty stainless steel hose clamps for use with marine exhaust hose. Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing. Suitable for 50mm wire reinforced marine exhaust hose Hose Clamp 60-63mm
£8.30

Heavy Duty Stainless Steel Hose Clamp 68-73mm (63mm hose)
Heavy Duty Stainless Steel Hose Clamp 68-73mm (63mm hose)
Heavy duty stainless steel hose clamps for use with marine exhaust hose. Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing. Suitable for 63mm wire reinforced marine exhaust hose Hose Clamp 68-73mm
£16.50
Heavy Duty Stainless Steel Hose Clamp 86-91mm (75mm hose)
Heavy Duty Stainless Steel Hose Clamp 86-91mm (75mm hose)
Heavy duty stainless steel hose clamps for use with marine exhaust hose. Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing. Suitable for 75mm wire reinforced marine exhaust hose Hose Clamp 86-91mm
£17.20

Marine Rubber Exhaust Hose 40mm - Lloyds Approved
Marine Rubber Exhaust Hose 40mm - Lloyds Approved
Lloyds approved marine exhaust hose manufactured with salt water resistant EPDM rubber and double steel helix wire reinforcing. This strong rubber hose provides more flexibilty than other similar hoses allowing easier installation throughout the boat, ideally suited for marine applications. It is essential to use heavy duty stainless steel hose clamps when fitting this type of hose as regular hose...
£22.99
Marine Rubber Exhaust Hose 45mm - Lloyds Approved
Marine Rubber Exhaust Hose 45mm - Lloyds Approved
Lloyds approved marine exhaust hose manufactured with salt water resistant EPDM rubber and double steel helix wire reinforcing. This strong rubber hose provides more flexibilty than other similar hoses allowing easier installation throughout the boat, ideally suited for marine applications. It is essential to use heavy duty stainless steel hose clamps when fitting this type of hose as regular hose...

5

£23.99
Page: 1 | 2 |