Talamex
Grid
List
Talamex Aqualine QLS200 Slatted Floor
Talamex QLS200 is the smallest in the Aqualine range, a superb slatted floor dinghy, quick to inflate so you can get out onto the water in no time and when you're finished they're speedy to pack away and stow on board. Thanks to its slatted floor, Talamex Aqualine QLS Inflatable Dinghy is lightweight and can be launched with ease.
Key Features:
Easy to roll-up.
Lightweight.
Quick...
Talamex Aqualine QLS230 Slatted Floor
Talamex Aqualine QLS230 is a superb slatted floor dinghy, quick to inflate so you can get out onto the water in no time and when you're finished they're speedy to pack away and stow on board. Thanks to its slatted floor, Talamex Aqualine QLS Inflatable Dinghy is lightweight and can be launched with ease.
Key Features:
Easy to roll-up.
Lightweight.
Quick to set up.
Slatted floor.
What's...
Talamex Aqualine QLS250 Slatted Floor
Talamex Aqualine QLS250 is a superb slatted floor dinghy with larger diameter tubes than the smaller models, quick to inflate so you can get out onto the water in no time and when you're finished they're speedy to pack away and stow on board. Thanks to its slatted floor, Talamex Aqualine QLS Inflatable Dinghy is lightweight and can be launched with ease.
Key Features:
Easy to roll-up.
Lightweight.
Quick...
Talamex Bulkhead Yacht Heel Clinometer
Plastic Bulkhead Yacht Heel Clinometer
Black with chrome plated brass pendulum.
Size: 98x70mm.
Usually fitted to the bulkhead
Used to show the angle at which your yacht is listing
Stepped Hose Adaptor 32-60mm
Synthetic hose pillars - ideal for securely joining two dissimilar ID hoses.
Simply cut to size.
Stepped sizes: 57/60,50,45,38/40,30/32mm.
Talamex Syphon Pump
Syphon Pump
Pumping without electricity or suction. Quick transfer of all kinds of fluids. Protects against breathing in smelly vapours.
Pop the valve end in the liquid you wish to pump and move up and down until syphoning starts
Ø 19 mm - 3/4", 30ltr./min.
Compact Manual Bilge Pump
A manual compact hand bilge pump made from non-corosive materials.
Barbed inlet and outlet nozzles accomodate 25mm hoses.
Surface or thru-deck mount, with a fixed handle.
Up to 10 litres of water per 30 strokes in one minute.
Compact bilge pump 180mm x 125mm x 75mm
Galvanised Claw Anchor 5kg
5Kg Galvanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Galvanised Claw Anchor 7.5kg
7.5Kg Glavanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Galvanised Claw Anchor 10kg
10Kg Galvanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Galvanised Claw Anchor 15kg
15Kg Galvanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Galvanised Claw Anchor 20kg
20Kg Glavanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Galvanised Folding Grapnel Anchor 1.5kg
Grapnel Anchor 1.5kg
Low cost weighted grapnel anchors.
The galvanised folding grapnel anchor has a weighted end to improve its holding power, easily stowed due to the way the flukes fold in to the shank and is therefore a popular anchor for smaller day boats, tenders and sailing dinghies.
Galvanised Folding Grapnel Anchor 2.5kg
Grapnel Anchor 2.5kg
Low cost weighted grapnel anchors.
The galvanised folding grapnel anchor has a weighted end to improve its holding power, easily stowed due to the way the flukes fold in to the shank and is therefore a popular anchor for smaller day boats, tenders and sailing dinghies.
Galvanised Folding Grapnel Anchor 3.2kg
Grapnel Anchor 3.2kg
Low cost weighted grapnel anchors.
The galvanised folding grapnel anchor has a weighted end to improve its holding power, easily stowed due to the way the flukes fold in to the shank and is therefore a popular anchor for smaller day boats, tenders and sailing dinghies.
Galvanised Folding Grapnel Anchor 4.0kg
Grapnel Anchor 4.0kg
Low cost weighted grapnel anchors.
The galvanised folding grapnel anchor has a weighted end to improve its holding power, easily stowed due to the way the flukes fold in to the shank and is therefore a popular anchor for smaller day boats, tenders and sailing dinghies.
Galvanised Folding Grapnel Anchor 6.0kg
Grapnel Anchor 6.0kg
Low cost weighted grapnel anchors.
The galvanised folding grapnel anchor has a weighted end to improve its holding power, easily stowed due to the way the flukes fold in to the shank and is therefore a popular anchor for smaller day boats, tenders and sailing dinghies.
Galvanised Folding Grapnel Anchor 8.0kg
Grapnel Anchor 8.0kg
Low cost weighted grapnel anchors.
The galvanised folding grapnel anchor has a weighted end to improve its holding power, easily stowed due to the way the flukes fold in to the shank and is therefore a popular anchor for smaller day boats, tenders and sailing dinghies.
Fuel Jerry Can with Pouring Spout - 5Ltr
Jerry Can with Pouring Spout - 5Ltr
Fuel Jerry Can manufactured in strong polythene plastic with flexible pouring spout.
For petrol/diesel
Size: 264 x 140 x 246
5Ltr Capacity
Fuel Jerry Can with Pouring Spout - 10Ltr
Jerry Can with Pouring Spout - 10Ltr
Fuel Jerry Can manufactured in strong polythene plastic with flexible pouring spout.
For petrol/diesel
Size:325 x 165 x 318
10Ltr Capacity
Fuel Jerry Can with Pouring Spout - 20Ltr
Jerry Can with Pouring Spout - 20Ltr
Fuel Jerry Can manufactured in strong polythene plastic with flexible pouring spout.
For petrol/diesel
Size: 389 x 213 x 388
20Ltr Capacity
Honda 3/8 Fuel Line Fitting
Fuel Line Fitting
Female fuel /Engine connector
Honda
Push Button Horn Switch
Push Button Horn/Starter switch for flush fitting.
Waterproof Push Button Horn Switch with screw-in terminals.
12v DC 5amp
Hole size around 18/19mm
Button size around 25mm
Waterproof Toggle switch
Toggle Switch
On/Off panel mount toggle switch with waterproof cover.
Mounting aperture 12mm
Battery Isolator Switch c/w Protective Cap 135 amp
Basic battery isolation switch
Intended for isolating a single battery.
Can also be used for controling high current devices such as winches, windlasses, capstans etc.
Maximum Voltage: 12- 24 Vdc
Maximum Surge Current: 400Amps 25mm sq cable
Maximum continuous current: 100Amps/135Amps @ 12Vdc
Terminal Stud Diameter: 10mm
Stainless Steel Swivelling Anchor Connector 6-8mm
316 stainless steel anchor/chain swivelling connector which allows smooth sliding of the chain by eliminating the possibility of jamming in either the stemhead or chain stopper.
For chain: 6-8mm
Length: 95mm
Width: 16mm
Weight: 252g
Working load: 850kg
Breaking load: 1275kg
270mm Stainless Steel Mooring Compensator Spring
Stainless Steel AISI 302 mooring compensator that absorbs the shocks of the mooring lines.
Length 270 mm
5mm dia. material thickness
320mm Stainless Steel Mooring Compensator Spring
Stainless Steel AISI 302 mooring compensator that absorbs the shocks of the mooring lines.
Length 320 mm
6mm dia. material thickness
Rubber Mooring Compensator for 10/12mm Line
Mooring compensator made of EPDM-Rubber that absorbs the shocks of the mooring lines.
Built-in line clamps prevent wear out of the line on the rubbers.
For Rope 10 - 12 mm
Length 430 mm
Rubber Mooring Compensator for 14/16mm Line
Mooring compensator made of EPDM-Rubber that absorbs the shocks of the mooring lines.
Built-in line clamps prevent wear out of the line on the rubbers.
For Rope 14 - 16 mm
Length 490 mm
Rubber Mooring Compensator for 18/20mm Line
Our mooring rubber compensators are made from strong EPDM rubber making them impervious to UV rays and salt water.
A safe and gentle mooring solution, the Foresheda is easy to fit by simply wrapping the mooring rope around the compensator, usually once or twice on sheltered moorings and at least three times on exposed moorings.
The compensator will absorb sudden or sharp loads preventing unneccessary...
Telescopic Aluminium Boat Hook 120 - 210cm
A boat hook is an inexpensive basic piece of "must have" equipment for any vessel.
This aluminium telescopic boat hook is sturdy, lightweight and easily stowed on board and easy to use by all crew members. The twist to lock action allows the pole to be set at the desired length
Used to retrieve moorings and lines this boat hook is supplied with rubber grip and plastic boat hook head.
Length: 120 -...
Chrome 3 Amp 2 Pin Deck Plug & Socket
Chromed plated brass 3amp 2 Pin Plug & Socket suitable for deck or bulkhead mounting and supplied with sealing gasket and plastic protection cap on retainer.
2 Pin 3A rated
Polarity protected waterproof connection
Base Dia. 37mm
O/A Height 56mm
Chrome 3 Amp 3 Pin Deck Plug & Socket
Chromed plated brass 3amp 3 Pin Plug & Socket suitable for deck or bulkhead mounting and supplied with sealing gasket and plastic protection cap on retainer.
3 Pin 3A rated
Polarity protected waterproof connection
Base Dia. 37mm
O/A Height 56mm
Chrome 3 Amp 4 Pin Deck Plug & Socket
Chromed plated brass 3amp 4 Pin Plug & Socket suitable for deck or bulkhead mounting and supplied with sealing gasket and plastic protection cap on retainer.
4 Pin 3A rated
Polarity protected waterproof connection
Base Dia. 37mm
O/A Height 56mm
12v Cigar Lighter Plug
12v Cigar Lighter Plug
Black plastic housing with non-corrosive metal parts - nickel plated phosphor bronze.
Solderless screw terminals, - brass screws.
Cable restraint.
The spring loaded contact tip is exceptionally wide to avoid sparking and heating.
The sharp edges of the side spring - the negative carrier - help in holding this plug better connected in the universal Car Lighter Socket.
12v Cigar Lighter Flush Mounted Rectangular Socket
12v Cigar Lighter
Black plastic housing with tight sealing flexible UV stabilised flap cover. All non-corrosive metal parts - nickel-plated brass.
Internal rim keeps all accessory plugs securely connected.
Twin pole. Push-on blade terminals with polarity marks.
Nylon Horn Cleat 75mm
75mm Black Nylon Horn Cleat
Horn Cleats are suitable for halyard, control lines and mooring cleats for a range of rope sizes and the generous base area allows the cleat to be secured and sealed firmly.
Hole Centres 21mm
O/A length 75mm
Nylon Horn Cleat 100mm
100mm Black Nylon Horn Cleat
Horn Cleats are suitable for halyard, control lines and mooring cleats for a range of rope sizes and the generous base area allows the cleat to be secured and sealed firmly.
Hole Centres 30mm
O/A length 100mm
Nylon Horn Cleat 165mm
165mm Black Nylon Horn Cleat
Horn Cleats are suitable for halyard, control lines and mooring cleats for a range of rope sizes and the generous base area allows the cleat to be secured and sealed firmly.
Hole Centres 41mm
O/A length 165mm
Nylon Horn Cleat 220mm
220mm Black Nylon Horn Cleat
Horn Cleats are suitable for halyard, control lines and mooring cleats for a range of rope sizes and the generous base area allows the cleat to be secured and sealed firmly.
Hole Centres 52mm
O/A length 220mm
Brass Engine Oil Sump Pump
Brass manual oil change pump for extracting engine oil from inboard engines.
Simply run the engine for a short time to heat the oil, then turn off engine and insert the longer of the nylon tubes in to the engine dipstick hole.
The shorter length of nylon tube can dispense the used oil in to a separate container.
Gently pump to draw up the used oil in preparation for a complete oil change.
The...
Stainless Steel Rail Mount Flag Pole Socket
This beautiful socket is rail mounted with minimal visible fixings.
A secure, stylish and easy way to mount flags to a pushpit or pullpit handrail.
316 Stainless Steel casting.
For 1' (25.4mm) Flag Staff.
Nylon sleeve not included
Talamex Stainless Steel Lifebuoy Bracket
Stainless steel lifebuoy brackets suitable for 60cm and 75cm orange lifebuoys.
Supplied as a pair
Fixings sold separate
Stainless Steel Folding Step
Folding Step
Cast 316 Stainless Steel folding step , which only projects 24mm above the surface when folded.
Folding Step - base size - 111mm x 47mm
Hole centres approx 90mm
Hatch Support Spring 220mm
A simple yet effective solution to holding open hatchs and locker doors.
The hatch retaining spring when rigid in straight upright position allows the hatch to be supported open, or to bend the spring will allow hatch closure.
Stainless steel construction
220 mm long
Snap On Quick Release Battery Connectors
The battery connectors are heavy-duty products equivalent to those designed for permanent connection.
The battery can be easily disconnected and moved to another car, leisure vehicle, boat, etc., or taken indoors in cold weather.
No tools needed, as is the case when connecting or disconnecting traditional terminals.
With Quick connectors the battery can be disconnected in a few seconds, thus preventing...
Plastic Inspection Hatch 143mm Overall
Molded polypropylene inspection hatch, with O ring seal and which when the lid is open is secured by a strap to prevent losing overboard.
102mm Internal
143mm Overall
M4 fixing holes
