Grid
List
Lewmar Standard Pawls & Springs - Small (5 - 48/66)
Lewmar Standard Pawls & Springs kit - Small (5 - 48/66)
Kit Contains:
6 pawls
12 pawl springs
Lewmar Standard Pawls & Springs - Large (50 - 65)
Standard Pawls & Springs Kit - Large (50 - 65)
Kit Contains:
6 pawls
12 pawl springs
Lewmar 19701500 Winch Maintenance Pack
Lewmar Winch Maintenance Pack
Kit Contains:
How to service your winch guide
Geargrease: (100g tube)
Racelube Winch Oil (55ml)
10 Pawl Springs
Lubricating Brush
Lewmar Grease 100G Tube
LEWMAR WINCH GREASE
100g tube of Lewmar waterproof winch grease for many other onbaord applications
Lewmar Winch Handle Pocket
Lewmar Winch Handle Pocket
External Sizes:
Width @ Top 95mm
Width @ Botton 74mm
Depth 56mm
Height 255mm
InternalSizes:
Width @ Top (narrowest point) 74mm
Width @ Bottom (narrowest point) 54mm
Depth 48mm
Lewmar Alloy Winch Handle Lock-In (Forged) 8' (200mm)
Lewmar 8' (200mm) Alloy Lock In Winch Handle
Lewmar winch handles use ball bearings for maximum efficiency.
Ball bearings provide maximum efficiency
Manufactured in durable, lightweight alloy
Lewmar Alloy Winch Handle Lock-In (Forged) 10' (250mm)
Lewmar 10' (250mm) Alloy Lock In Winch Handle
Lewmar winch handles use ball bearings for maximum efficiency.
Ball bearings provide maximum efficiency
Manufactured in durable, lightweight alloy
Lewmar OneTouch, Lock in, Single Grip Winch Handle 8' (200mm)
Lewmar 8' OneTouch Winch Handle is a new approach to winch handle design, simply squeeze and insert into the sheet winch.
Its patented 'OneTouch' mechanism allows you to squeeze the release lever (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
To lock-in, simply squeeze and insert into the sheet winch.
All it takes is one hand, so you can spend less time...
Lewmar OneTouch, Lock in, Single Grip Winch Handle 10' (250mm)
Lewmar OneTouch 10' OneTouch Winch Handle is a new approach to winch handle design, simply squeeze and insert into winch.
Its patented 'OneTouch' mechanism allows you to squeeze the releaselever (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
To lock-in, simply squeeze and insert into winch.
All it takes is one hand. So you can spend less time fiddling around...
Lewmar OneTouch, Lock in, Power Grip Winch Handle 8' (200mm)
Lewmar 8' OneTouch Winch Handle is a new approach to winch handle design, simply squeeze and insert into winch.
Its patented 'OneTouch' mechanism allows you to squeeze the releaselever (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
To lock-in, simply squeeze and insert into winch.
All it takes is one hand. So you can spend less time fiddling around and more...
Lewmar OneTouch, Lock in, Power Grip Winch Handle 10' (250mm)
Lewmar 10' OneTouch Winch Handle is a new approach to winch handle design.
Its patented 'OneTouch' mechanism allows you to squeeze the releaselever (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
To lock-in, simply squeeze and insert into winch.
All it takes is one hand. So you can spend less time fiddling around and more time sailing.
Powergrip makes winching...
Lewmar OneTouch, Lock in, Double Grip Winch Handle 10' (250mm)
Lewmar 10' OneTouch Double Grip Winch handle is a new approach to winch handle design, simply squeeze and insert into winch.
Its patented 'OneTouch' mechanism allows you to squeeze the releaselever (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
To lock-in, simply squeeze and insert into winch.
All it takes is one hand. So you can spend less time fiddling...
Barton Floating Winch Handle 8"
Floating Winch Handle
Barton floating winch handles feature a unique hollow moulded body with an integral moulded handle shaft.
A bi-directional locking action operates from an easy to use thumb switch.
Available in two sizes, float in fresh or salt water.
NOTE: Floating winch handles are all tested to a load of 110 kgs and are intended for lightweight use only.
Barton Floating Winch Handle 10"
Floating Winch Handle
Barton floating winch handles feature a unique hollow moulded body with an integral moulded handle shaft.
A bi-directional locking action operates from an easy to use thumb switch.
Available in two sizes, float in fresh or salt water.
NOTE: Floating winch handles are all tested to a load of 110 kgs and are intended for lightweight use only.
Barton Winchers - Small
Barton Winchers are a specially designed rubber moulding which fits over the top of standard sheet winches converting them to self tailing.
Easy to fit and available in four sizes to suit most winches.
How they work:
The simple operation works when the line is sheeted under load causing the coils to climb up the drum and are then gripped by the underside of the rubber body.
When the sail is trimmed,...
Barton Winchers - Medium
Barton Winchers are a specially designed rubber moulding which fits over the top of standard sheet winches converting them to self tailing.
Easy to fit and available in four sizes to suit most winches.
How they work:
The simple operation works when the line is sheeted under load causing the coils to climb up the drum and are then gripped by the underside of the rubber body.
When the sail is trimmed,...
Barton Winchers - Large
Barton Winchers are a specially designed rubber moulding which fits over the top of standard sheet winches converting them to self tailing.
Easy to fit and available in four sizes to suit most winches.
How they work:
The simple operation works when the line is sheeted under load causing the coils to climb up the drum and are then gripped by the underside of the rubber body.
When the sail is trimmed,...
Barton Winchers - Extra Large
Barton Winchers are a specially designed rubber moulding which fits over the top of standard sheet winches converting them to self tailing.
Easy to fit and available in four sizes to suit most winches.
How they work:
The simple operation works when the line is sheeted under load causing the coils to climb up the drum and are then gripped by the underside of the rubber body.
When the sail is trimmed,...
Barton Winch Handle Holder
This Winch Handle Holder from Barton utilises the star pocket system to store the winch handle.
Mounts on bulkheads or under locker lids.
Suits any make/model of star winch handle
Base Diameter 52mm.