Grid
List
Battery Isolator Switch
Battery Isolation Switch
Intended for isolating a single battery.
Can also be used for controling high current devices such as winches, windlasses, capstans etc.
Maximum Voltage: 24 Vdc
Maximum Surge Current: 500Amps for 10 seconds @ 12Vdc
Maximum continuous current: 100Amps/140Amps @ 12Vdc
Dimensions: 75mm x 60mm diameter
Terminal Stud Diameter: 10mm
Battery Isolator Switch c/w Protective Cap
Battery Isolation Switch with Protective Cap
Intended for isolating a single battery.
Can also be used for controling high current devices such as winches, windlasses, capstans etc.
Maximum Voltage: 24 Vdc
Maximum Surge Current: 500Amps for 10 seconds @ 12Vdc
Maximum continuous current: 100Amps/140Amps @ 12Vdc
Dimensions: 75mm x 60mm diameter
Terminal Stud Diameter: 10mm
Battery Isolator Switch c/w Protective Cap 135 amp
Basic battery isolation switch
Intended for isolating a single battery.
Can also be used for controling high current devices such as winches, windlasses, capstans etc.
Maximum Voltage: 12- 24 Vdc
Maximum Surge Current: 400Amps 25mm sq cable
Maximum continuous current: 100Amps/135Amps @ 12Vdc
Terminal Stud Diameter: 10mm
Spare Red Key for Battery Isolator Switch
Spare Red Key for Battery Isolator Switch
Universal handy spare key for battery isolator switch
BEP Battery Management System
Heavy duty dual battery charging made easy, an ideal replacement for a Battery Selector Switch.
Simply remove existing selector switch and connect existing wires to a 716 cluster no extra wires are required for a fully automatic battery management system.
Fully automatic - No more flat start batteries.
Electronics protection from harmful engine start spikes.
Easy replacment for existing...
Vetus Heavy Duty Battery Changeover Switch 175 amp Continuous
Vetus Heavy Duty Battery Changeover Switch
The famous VETUS battery selector switch is a sturdy rotary series switch. It enables battery usage and charging.
From the OFF position, in accordance with the switch pattern, battery 1 only, battery 1 plus battery 2 or battery 2 only can be switched on.
The switch enables usage and charging of the batteries individually and in parallel connection.
The...
Blue Sea Systems Mini Battery Selector Switch
BLUE SEA M-SERIES 4 POSITION BATTERY SWITCH
300 Ampere continuous rating for outboards and small gasoline or diesel engines.
Tin-plated copper studs for maximum conductivity and corrosion resistance
Studs accept 3⁄8" (M10) ring terminals
One-piece terminal stud design never loosens over time
7⁄8" (22.22mm) stud length accepts multiple cable terminals
Isolating cover with three snap-in side...
Blue Sea Systems Mini Battery Switch (Knob Version)
Blue Sea M-Series Battery Switches
300 Ampere continuous rating for outboards and small gasoline or diesel engines.
Tin-plated copper studs for maximum conductivity and corrosion resistance
Studs accept 3⁄8" (M10) ring terminals
One-piece terminal stud design never loosens over time
7⁄8" (22.22mm) stud length accepts multiple cable terminals
Isolating cover with three snap-in side pieces...
Blue Sea Systems Mini Battery Switch (Key Version)
Blue Sea M-SERIES BATTERY SWITCHES
300 Ampere continuous rating for outboards and small gasoline or diesel engines.
Tin-plated copper studs for maximum conductivity and corrosion resistance
Studs accept 3⁄8" (M10) ring terminals
One-piece terminal stud design never loosens over time
7⁄8" (22.22mm) stud length accepts multiple cable terminals
Isolating cover with three snap-in side pieces...
Blue Sea Systems E-Series Selector Battery Switch
Blue Sea E-Series 4 Position Battery Switch
Select either battery bank or both plus an off position, 350 Ampere continuous rating for inboard petrol and diesel engines.
Tin-plated copper studs for maximum conductivity and corrosion resistance
Studs accept 3⁄8" (M10) ring terminals
7⁄8" (22mm) stud length accepts multiple cable terminals
One-piece terminal stud design never loosens over...
Blue Sea Systems Dual Circuit Plus Battery Switch 5511E
Blue Sea E-Series Dual Circuit Battery Switch
A high quality battery switch for craft with a dual battery installation. This switch has the ability to switch two isolated batteries to two isolated loads i.e. Starting battery to starter motor and house battery to domestic circuits. When the switch is set to the Combine position, both batteries are connected in parallel to the loads. Make before break...
Blue Sea Systems E-Series Single Circuit ON/OFF Battery Switch
Blue Sea E-SERIES BATTERY SWITCHES
350 Ampere continuous rating for inboard petrol and diesel engines.
Tin-plated copper studs for maximum conductivity and corrosion resistance
Studs accept 3⁄8" (M10) ring terminals
7⁄8" (22mm) stud length accepts multiple cable terminals
One-piece terminal stud design never loosens over time
Case design allows surface or rear panel mounting options
Label...
Blue Sea H/Duty Battery Switch 4 Way 500A
HD BATTERY SWITCHES (Heavy Duty) Up to 600 Ampere continuous rating for large diesel engines.Label with international legendsTactile indicator conveys knob position by feelAccepts up to 4/0 AWG (120mm2) battery cablesCase design allows surface or rear panel mounting7/8" (22mm) stud length accepts multiple cable terminalsOne-piece terminal stud design never loosens over timeM12 tin-plated copper studs...
Battery Box Standard Red 270x195x200mm
Plastic Battery Box
Supplied with securing strap and essential to avoid spillages in to the boat.
Size: L270 x W195 x H200 mm
Large Battery Box 410x200x250mm
Large battery box designed with adjustable partition to suit different battery case sizes.
Suppled with fitting strap, this is ensential to prevent spillages leaking in to the boat.
Size: L410 x W200 x H250mm