Vents

ECS VENTILITE CLEAR ROOF VENT C/W S/S COVER) This is one of the original ventilation systems specifically designed for marine use and is still one of the best. It is a proven reliable product; with thousands of units installed on both commercial and pleasure craft throughout the world in the last four decades. VENTILITE STATIC VENTILATORS Attractive ventilator with low profile design to avoid snagging...

THE ECS VENTIDUCT SYSTEM This is one of the original ventilation systems specifically designed for marine use and is still one of the best. It is a proven reliable product; with thousands of units installed on both commercial and pleasure craft throughout the world in the last four decades. VENTAIR & VENTILITE STATIC VENTILATORS Attractive ventilator with low profile design to avoid snagging...

The Marinco MiniVent 1000 is the smallest and most economical solar vent in the Nicro line. At just 7" in diameter and approximately 1-3/4" high, the MiniVent 1000 is compact yet effective. The solar powered model is an exhaust vent only, but it will keep the boat cabin cool when you need it most - during the hot sunlight hours. Under solar power the MiniVent 1000 will move 700 cubic feet of air per...

Hugely popular Mushroom Deck Ventilator. Made using AISI316 Stainless, polished to a high-gloss finish. These vents will provide excellent ventilation, with the added security of a built-in dorade with mosquito screen. Can be closed tight during adverse weather or deck washing. Supplied with white plastic interior counter flange. A/O Diameter: 185mm Cut Out Diameter: 147mm Deck Thickness: 32mm...

Hugely popular Mushroom Deck Ventilator. Made using AISI316 Stainless, polished to a high-gloss finish. These vents will provide excellent ventilation, with the added security of a built-in dorade with mosquito screen. Can be closed tight during adverse weather or deck washing. Supplied with white plastic interior counter flange. A/O Diameter: 117mm Cut Out Diameter: 85mm Deck Thickness: 27mm - 41mm Height...

Vetus type UFO2 is a stylish ventilator with polish stainless steel cover, providing ventilation to cabins and heads compartments helping reduce or prevent condensation and humidity. Stainless steel polished cover Plastic headlining trim ring, deck flange and mosquito screen Overall size 200mm: 30mm above deck Free flow 31.8 cm2 Vetus UFO2 deck vents can also be used in conjunction...

Vetus electric ventilator fans are designed for ceiling or wall mount in all areas of marine ventilation, such as saloons, cabins, heads and galleys. The vent fan is very quiet, as the motor does not use carbon brushes, making the vent suitable for night running. Vetus FAN12/24 also boasts a very low level of energy consumption. The fan motor is a long life computer motor which can run at two different...

In-line bilge blower with 100mm (4") spigots for extracting fumes and providing essential ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces and supplied with 16-gauge, tinned and caulked copper wire leads. New improved design includes: Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce...

Stainless Steel Shell Vent L44mm x W44mm x H16mm

Stainless Steel (304)140mm long x 115mm wide x 52mm high

Large Stainless Steel Clam Shell Vent Size: L 190mm x W 170mm x H 72mm Dimensions are inclusive of flange and fixings required.

Stainless Steel Louvered Vent Width: 128mmHeight: 116mm

Stainless Steel Louvered Vent Width: 127mm Height: 232mm

Polished Stainless Steel Slotted Louvre Vent for engine room ventilation. This version has vent slots which extend approx 12mm beyond mounting flange. 6 Slot: Flange 330mm x 78mm - Cut Out 305mm x 54mm 7 Slot: Flange 380mm x 78mm - Cut Out 355mm x 54mm 8 Slot: Flange 430mm x 78mm - Cut Out 405mm x 54mm

Stainless Steel Buterfly Vent 102mm diameter with Centre knob.

ABS Plastic Hose Vent 90mm x 90mm overall 73mm Ø hose spigot Suitable for bilge blowers and onboard ventilation.

Black ABS Louvered vent - 261 x 125mm

Width oa 170mm Cut 75mm Airflow 60mm PLASTIMO REPLACEMENT VENT BLUE FOR P16922