Grid
List
3/4 shape bumper dock fender - Ø 25 x 90 cm
The Bumper is a really efficient fender, to be fixed on the pontoon; according to its location, it provides efficient protection to the bow and amidships.
Suitable for all pontoon or cartway shapes: square or round-end pontoon.
Sturdy construction, from rotomoulded PVC, UV-ray protected.
Registered design.
Max. pressure: 0.10 bar / 1.45 psi
Angle Dock Fender
Fastening with 8 x Ø 7 mm screws (not included).
Dimensions:
335 mm large. leg
155 mm short leg
120 mm height
72 mm width
Unfolded: 490 x 120 x 72 mm
Articulated Bumper 18x80cm
ARTICULATED BLUE DOCK FENDER/BUMPER STD 3/4 18 X 80cm
Whether you sail shorthanded or singlehanded, whether you are a beginner or a confirmed skippper, the Bumper will take away some "emotional" moments when approaching the pontoon, in particular when the wind blows hard and currents are unkind!
The Bumper is a really efficient fender, to be fixed on the pontoon; according to its location,...
Bumper 3/4-Standard - Ø18 x 40cm
The Bumper is a really efficient fender, to be fixed on the pontoon; according to its location, it provides efficient protection to the bow and amidships.
Suitable for all pontoon or cartway shapes: square or round-end pontoon.
Sturdy construction, from rotomoulded PVC, UV-ray protected.
Registered design.
Max. pressure: 0.10 bar / 1.45 psi
Ocean Dock Pontoon Fender Air Filled
The Ocean inflatable Dock fender is the most convenient solution when it comes to bumpers, providing exceptional dock and boat protection. It is the ideal fender for dock fending, fitting perfectly in every dock with easy and safe installation.
Available in 3/4 or 1/2
Length 640mm
Height 220mm
Fortress FX Series Lightweight Anchor
Fortress anchors are constructed using a high-tensile, corrosion-resistant, aluminium magnesium alloy that is precision- machined into interlocking components with no welds to weaken the metal. This results in a lighter, easy to handle anchor with superior holding power. The anchors have been designed to be easily disassembled for compact storage, or as a spare and/or a storm anchor.
All Fortress®...
Galvanised Delta Type Self Launching Anchor 6kg
Available in a range of sizes to suit most vessels, this Delta Type galvanised anchor provides excellent holding power in most types of sea or river bed. The shank profile and ballasted tip make it self-launching, and its low centre of gravity and self-righting geometry ensure that it will set immediately.
Weight: 6kg
Recommended Boat Size: 7.5mtr
Dimensions: O/A Length 580mm x W248mm
Galvanised Delta Type Self Launching Anchor 8kg
Available in a range of sizes to suit most vessels, this Delta Type galvanised anchor provides excellent holding power in most types of sea or river bed. The shank profile and ballasted tip make it self-launching, and its low centre of gravity and self-righting geometry ensure that it will set immediately.
Weight: 8kg
Recommended Boat Size: 9.15mtr
Dimensions: O/A Length 644mm x W270mm
Galvanised Delta Type Self Launching Anchor 10kg
Available in a range of sizes to suit most vessels, this Delta Type galvanised anchor provides excellent holding power in most types of sea or river bed. The shank profile and ballasted tip make it self-launching, and its low centre of gravity and self-righting geometry ensure that it will set immediately.
Weight: 10kg
Recommended Boat Size: 11mtr
Dimensions: O/A Length 680mm x W275mm
Galvanised Delta Type Self Launching Anchor 15kg
Available in a range of sizes to suit most vessels, this Delta Type galvanised anchor provides excellent holding power in most types of sea or river bed. The shank profile and ballasted tip make it self-launching, and its low centre of gravity and self-righting geometry ensure that it will set immediately.
Weight: 15kg
Recommended Boat Size: 12.20mtr
Dimensions: O/A Length 790mm x W362mm
Galvanised Delta Type Self Launching Anchor 20kg
Available in a range of sizes to suit most vessels, this Delta Type galvanised anchor provides excellent holding power in most types of sea or river bed. The shank profile and ballasted tip make it self-launching, and its low centre of gravity and self-righting geometry ensure that it will set immediately.
Weight: 20kg
Recommended Boat Size: 15.25mtr
Dimensions: O/A Length 870mm x W385mm
Galvanised Claw Anchor 2kg
2kg Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows easily...
Galvanised Claw Anchor 5kg
5Kg Galvanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Galvanised Claw Anchor 7.5kg
7.5Kg Glavanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Galvanised Claw Anchor 10kg
10Kg Galvanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Galvanised Claw Anchor 15kg
15Kg Galvanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Galvanised Claw Anchor 20kg
20Kg Glavanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
French Style Galvanised Anchor 2.0kg
High grade hot-dipped galvanised steel French style anchor that will bite into the seabed within seconds
Solid welded construction
Thin flukes with sharp edges: ensures quick digging even in the hardest sea beds.
Suitable for all sebed conditions
High holding force
2.0kg
L406mm x W185mm
French Style Galvanised Anchor 3.5kg
High grade hot-dipped galvanised steel French style anchor that will bite into the seabed within seconds
Solid welded construction
Thin flukes with sharp edges: ensures quick digging even in the hardest sea beds.
Suitable for all sebed conditions
High holding force
3.5kg
L497mm x W219mm
French Style Galvanised Anchor 6.0kg
High grade hot-dipped galvanised steel French style anchor that will bite into the seabed within seconds
Solid welded construction
Thin flukes with sharp edges: ensures quick digging even in the hardest sea beds.
Suitable for all sebed conditions
High holding force
6.0kg
L547mm x W270mm
French Style Galvanised Anchor 8.0kg
High grade hot-dipped galvanised steel French style anchor that will bite into the seabed within seconds
Solid welded construction
Thin flukes with sharp edges: ensures quick digging even in the hardest sea beds.
Suitable for all sebed conditions
High holding force
8.0kg
L646mm x W312mm
French Style Galvanised Anchor 10.0kg
High grade hot-dipped galvanised steel French style anchor that will bite into the seabed within seconds
Solid welded construction
Thin flukes with sharp edges: ensures quick digging even in the hardest sea beds.
Suitable for all sebed conditions
High holding force
10.0kg
L732mm x W347mm
French Style Galvanised Anchor 12.0kg
High grade hot-dipped galvanised steel French style anchor that will bite into the seabed within seconds
Solid welded construction
Thin flukes with sharp edges: ensures quick digging even in the hardest sea beds.
Suitable for all sebed conditions
High holding force
12.0kg
L786mm x W347mm
Galvanised Folding Grapnel Anchor
Weighted Grapnel Anchor
The galvanised folding grapnel anchor has a weighted end to improve its holding power, easily stowed due to the way the flukes fold in to the shank and is therefore a popular anchor for smaller day boats, tenders and sailing dinghies.
Low cost weighted grapnel anchors
Hollow flukes for better hold
Weighted Shank
Meridian Zero Anchor Ring - Alderney Ring Retrieval Stainless Steel
Raise Your Anchor With Ease!Extremely simple to use, the Anchor Ring will assist in raising your anchor from the seabed using the buoyancy of a buoy - not supplied, to lift the anchor to the surface making it easy to retrieve with minimal hard lifting.Lifts anchors up to 27kg - 60 pounds
Stainless steel for durability and wear resistanceSimply attach a shackle, line and buoy to complete the Anchor...
Zinc Plated Mooring Pin 19mm x 600mm + Ring
Zinc Plated Mooring Pin + Half Ring
19mm dia x 600mm long
AG Double Head Lock Windlass Galvanised
Galvanised double headed lock key suitable for British Waterways
Length: 280mm (11")
Suitable for canals and waterways
Sea Anchor Drogue
Sea Anchor/Drogue
Suitable as a sea anchor or drogue (also known as a storm drogue) is trailed behind a boat on a long line attached to the stern. The drogue is used to slow the boat down in a storm and to prevent the hull from becoming side-on to the waves, stabilising the vessel and an alternative to anchoring in to the sea-bed.
Made from Rip-Stop nylon fabric with a loose weave coated PVC...
Octahedral type radar reflector - Reflective area 7 m2
Aluminum models, fold flat for easy storage.
For optimum performance, the radar reflector must be mounted in catch rain orientation.
Lofrans X1 Aluminium Windlass 12V 500W 6mm Gypsy
X1 - Vertical Windlass
Main Features
Luxury chrome bronze base and drum
With drum or Low profile
Independent Gypsy and drum operation
Rope and chain combination Gypsy
Manual chain release
Rope chain management by the spring loaded arm
Chain counter magnet pre-installed as standard
IP67 rated heavy duty electric motor
Anodised marine aluminium gearbox
Standard Equipment:...
South Pacific VA 600 Series Vertical Windlass Kit
Vertical Windlass Kits with Aluminium Base - VA 600 Series
The VA Series of one piece vertical windlasses VA600 is supplied in two models with either a 6mm or 8mm gypsy.
The VA series are made of marine grade aluminium alloy with a powder coated finish to ensure corrosion resistance. The metal gearbox, heavy duty DC motor and base have been designed in one providing a robust unit and enabling easier...
South Pacific VA 1000 Series Vertical Windlass Kit
Vertical Windlass Kits with Aluminium Base - VA 1000 Series
The VA Series of one piece vertical windlasses VA1000 is supplied in two models with an 8mm gypsy.
The VA series are made of marine grade aluminium alloy with a powder coated finish to ensure corrosion resistance. The metal gearbox, heavy duty DC motor and base have been designed in one providing a robust unit and enabling easier installation....
Quick Mini Genius GP2 1200 Windlass 250w 12v
Quick Mini Genius GP2 1200 is a compact on deck anchor windlass with anodised body which is particularly suitable for smaller boats.
Specification:
Suggested boat length for this model is 6mtr - 9mtr (20ft - 30ft)
6mm or 8mm rope/chain gypsy options
Manual free fall
IP66 watertight motor
Motor power: 250 W
Motor supply voltage: 12V
Maximum pull: 550 Kg
Maximum working load: 170...
Quick Genius GP2 2000 800w Windlass
Quick Genius GP2 2000 On-Deck Windlass.
Designed for on deck mounting and manufactured in anodised aluminium with 800w motor, 8mm rope/chain gypsy and integrated sensor and magnet for chain counter.
Specification:
Suggested boat length for this model is 8mtr - 13mtr (26ft - 43ft)
6mm supplied as windlass only c/w contactor
8mm supplied as a kit c/w contactor, handle, breaker and switch
Manual...
Quick DP2E 800w Gypsy Vertical Windlass Kit
Quick Prince DP2E is a vertical anchor windlass with chain gypsy only and epicyclical gearbox, supplied with contactor/solenoid. The deck unit is manufactured in ASI 316 stainless steel and anodised aluminium in hard oxide with integrated sensor and magnet for chain counter. The benefit of the epicyclical gearbox over the standard Prince DP models is the vertical drive motor for easy drop in installation...
Quick Prince DP2 500w 6mm Windlass No Drum 12v
Quick Prince DP2 is a vertical anchor windlass with chain gypsy only, supplied with contactor/solenoid. The deck unit is manufactured in ASI 316 stainless steel and anodised aluminium in hard oxide with integrated sensor and magnet for chain counter.
Specification:
Suggested boat length for this model is 5mtr - 8.5mtr (16 - 28ft)
6mm rope/chain gypsy
Manual Free fall
IP66 watertight...
Quick Prince DP2 1000w 8mm Windlass No Drum 12v
Quick Prince DP2 is a vertical anchor windlass with chain gypsy only, supplied with contactor/solenoid. The deck unit is manufactured in ASI 316 stainless steel and anodised aluminium in hard oxide with integrated sensor and magnet for chain counter.
Specification:
Suggested boat length for this model is 8mtr - 13mtr (26 - 43ft)
8mm chain gypsy
Manual Free fall
IP66 watertight motor
Motor power: 1000...
Quick Prince DP2 1000w 8mm Windlass with Drum 12v
Quick Prince DP2 is a vertical anchor windlass with chain gypsy and drum, supplied with contactor/solenoid. The deck unit is manufactured in ASI 316 stainless steel and anodised aluminium in hard oxide with integrated sensor and magnet for chain counter.
Specification:
Suggested boat length for this model is 8mtr - 13mtr (26 - 43ft)
8mm chain gypsy and rope drum
Manual Free fall
IP66 watertight motor
Motor...
Quick Prince DP3 1500w 10mm Windlass No Drum 12v
Quick Prince DP3 is a vertical anchor windlass with chain gypsy only, supplied with contactor/solenoid. The deck unit is manufactured in ASI 316 stainless steel and anodised aluminium in hard oxide with integrated sensor and magnet for chain counter.
Specification:
Suggested boat length for this model is 12mtr - 15mtr (39 - 49ft)
10mm ISO chain gypsy
Manual Free fall
IP66 watertight...
Lewmar Pro Series 1000 Anchor Windlass Kit 8mm Rope/Chain Gypsy
Pro Series 1000 Anchor Windlass Kit - 8mm Rope/Chain Gypsy
A sleek anchor windlass which is suitable for power and sail boats from 6mtr-12mtr (20-38ft), the Lewmar Pro Series anchor windlass kit provides a DIY, easy to install windlass option housed in 100% 316 stainless steel, making it well protected and durable, and with push-button control and a built-in manual emergency recovery system, anchoring...
Lalizas Windlass Cabin Switch Control Board
- Mon-Off-Mon switch
- For use only in 12/24V. Maximum load per switch 15A
- Coated with electrostatic paint
- Completely wired and ready to install
MON-OFF-MON
Width 6.5cm
Height 7cm
Lofrans Windlass Cabin Switch Control Board
Quick windlass up down cabin control switch
Depth: 34mm
Height: 87mm
Width: 50mm
Lofrans Windlass Control Box 4 Terminal 12v 1000-1700W
The control box is an electric unit made up of two remote control switches enclosed inside a special container which protects it from marine corrosion. The entire unit has been designed with a view to simplifying and speeding up the various electrical connections.
For this purpose there is no need to open and / or pierce the container, as all the terminals and the panel for the electrical...
Lofrans Windlass Control Box 500-1700W 12v 3 Terminal
The control box is an electric unit made up of two remote control switches enclosed inside a special container which protects it from marine corrosion. The entire unit has been designed with a view to simplifying and speeding up the various electrical connections.
For this purpose there is no need to open and / or pierce the container, as all the terminals and the panel for the electrical...
Lofrans Windlass Control Box Controller 12v 4 Terminal 500-700w
The control box is an electric unit made up of two remote control switches enclosed inside a special container which protects it from marine corrosion. The entire unit has been designed with a view to simplifying and speeding up the various electrical connections.
For this purpose there is no need to open and / or pierce the container, as all the terminals and the panel for the electrical...
Lofrans Windlass Deck Foot Switch
This device is a switch which works simply pushing the foot on the button. The base is in stainless steel while the cover to prevent accidental engagement is in composite. The button is in special marine rubber able to withstand UV ray and the marine environment. Available in UP and DOWN version.
12-24V
80x95x20mm
Quick QNC CHC Chain Counter (Flush Mount Mk2) (replaces CHC1203)
The Quick QNC CHC is a complete and reliable tool to remotely operate a windlass and check the length of the lowered chain.
The lowered chain length is displayed on the IPS 3.5" high-brightness colour display in metres, feet and fathom.
The panel surface is constructed from black tempered glass with touch control function keys.
Product contents:
- Chain counter QNC CHC
- Protective...
Quick Windlass Deck Foot Switch
Low profile deck footswitches for convenient raising and lowering of the Anchor/Chain. Available with either Black or White casing with coloured Red/Grey safety cover to prevent accidental push-button operation.
Black Case: Up/Down
White Case: Up/Down
Compact Size: 77 x 85mm