Grid
List
Garmin 4 Pin to NMEA 2000 Male Adapter Cable
Connect your compatible 5-inch ECHOMAP™ CHIRP chartplotter/sounder combo to a NMEA 2000 network with this 6 foot (2 meters) adapter cable.
Garmin 7 Pin Power/Data Cable for GHC/GMI/GNX Instruments
Connect your GMI™ 20 or GHC™ 20 to a NMEA 0183 device with this 7-pin power/data cable. Features 90-degree connector for installation in tight spaces or flush mounting. .
Garmin BlueNet 20 Switch
Increase the number of available network ports in a Garmin BlueNet network. Once you’ve used all the ports on your compatible chartplotter just add a Garmin BlueNet 20 switch to the setup and keep constructing your expansive high-speed network.
Garmin BlueNet 30 Gateway
The Garmin BlueNet 30 gateway is required for Garmin BlueNet network compatible devices to network with legacy Garmin marine devices. Through this gateway you can connect a Garmin BlueNet network to a legacy Garmin Marine Network for a premium control experience.
Garmin BlueNet Cable - 500'
The Garmin BlueNet network cables offer various lengths to help with installations. Various sizes sold separately. Consider purchasing the Field installable Adapter Kit for the Garmin BlueNet network if purchasing this 500-foot-long cable.
Garmin BlueNet Marine Network Cable - 6' 1.83M
The Garmin BlueNet marine network cables are available in a variety of cable lengths to help with installations.
Cable length: 6' (1.83m)
Garmin Field Installable gWind Connectors
Use these water resistant male/female field-installable connectors at the foot of the mast for easy connection of the mast cables on Garmin's gWind wind sensors when stepping the mast.
Garmin GBT 10 Trim Tab Analog to NMEA 2000 Adapter
With the GBT 10 Trim Tab Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA 2000® signal so you can create or expand your network without replacing all of the equipment on your boat.
Garmin GND 10 Black Box Nexus to NMEA 2000 Bridge
The GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus Network and NMEA 2000 to provide compatibility between Nexus and Garmin products, including gWind, gWind Wireless and gWind Race transducers. Simple plug-and-play installation between Nexus and NMEA 2000, with USB connectivity, eliminates the need for user setup...
Garmin Marine Network Cable POE Isolation Coupler
Connect a thermal camera, underwater lighting or boart stabilizing system to a compatible GPSMAP® series Garmin chartplotter with this PoE (Power over Ethernet) isolation coupler. The coupler provides connectivity to the Garmin Marine Network; without it the network will not function correctly and could possibly damage your Garmin unit and/or PoE device.
Garmin NMEA 2000 Backbone / Drop Cable 30 cm
Extend your NMEA 2000 backbone with the 1 ft. (0.3 m) backbone/drop cable.
Garmin NMEA 2000 Field-installable Connector - Female
Use the female NMEA 2000 field-installable connector to create custom-length drop cables and backbone extension cables.
Garmin NMEA 2000 Field-installable Connector - Male
Use the male NMEA 2000 field-installable connector to create custom-length drop cables and backbone extension cables.
Garmin NMEA 2000 Inline Terminator
Use the inline terminator between the backbone cable and your compatible device to correctly terminate the network.
Garmin NMEA 2000 Multi-Port T-Connector
Make NMEA 2000 installations easier with our multi-port T-connector. This solution creates a more robust NMEA 2000 backbone by reducing issues with breaking points as well as stress induced by long back bones. The rigid construction is less prone to failure and decreases installation time.
Garmin NMEA 2000 Power Isolator
The NMEA 2000 power isolator is useful to ensure proper installation of the NMEA 2000 network in separating different power sources that could power the bus. Some NMEA 2000 capable engines can potentially provide power to the NMEA 2000 bus. The NMEA 2000 power isolator is useful because it makes sure the NMEA 2000 power from the engines and system power are kept separate.
Garmin NMEA 2000 Starter Kit
Garmin's starter kit has everything you need to build a basic NMEA 2000 network on your boat. The kit includes an NMEA 2000 drop cable (2 m), backbone cable (6 m), power cable (2 m), 2 T-connectors, and male and female terminator connectors.
Garmin NMEA 2000 Terminator - Female
This standard female NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network.
Garmin NMEA 2000 Terminator - Male
This standard male NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network.
Garmin NMEA2000 1 Port T-Connector
Add components to any NMEA 2000 network by installing this T-connector on the backbone cable. The revised version of this T-connector is offset by 45 degrees compared to the previous version.
Garmin NMEA2000 Power Isolator
Use this power isolator to ensure sources that could power the bus are separated properly during installation of the NMEA 2000 network.
Garmin SteadyCast NMEA 2000 Heading Sensor
SteadyCast heading sensor is a simple, easy-to-install solution that provides fast calibration and premium heading accuracy. It aligns your boat bow to its actual orientation so you know where you are casting according to your chartplotter screen.
Garmin NMEA 2000 Tee Connector
Add components to your NMEA 2000 network by installing the T-connector on your backbone cable.