Grid
List
MG Duff 208 Shaft Earthing Assembly Electro Eliminator
The MG Duff Electro Eliminator Brush assembly is a solution designed to provide effective protection to the stern gear of boats, regardless of whether the hull material is steel or GRP. The MG Duff Electro Eliminator Brush assembly is a valuable solution for protecting the stern gear of boats; by establishing a low-resistance electrical connection between the propeller shaft and sacrificial anode,...
MG Duff 40AHD Aluminium Hull Anode
. . . . .
Tecnoseal MerCruiser Alpha One Drive Gen 1 Aluminium Anode Kit
MerCruiser Alpha One Aluminium anode kit to fit Mercury Mercrusier Alpha One generation 1 sterndrive.
Screws included.
For salt and brackish water use.
Tecnoseal MerCruiser Alpha One Drive Gen 2 Aluminium Anode Kit
MerCruiser Alpha One Aluminium anode kit to fit Mercury Mercrusier Alpha One generation 2 sterndrive.
Screws included.
For salt and brackish water use.
Tecnoseal MerCruiser Bravo One Aluminium Anode Kit
MerCruiser Bravo One Aluminium anode kit to fit Mercury Mercrusier Bravo One sterndrive.
Screws included.
For salt and brackish water use.
Tecnoseal MerCruiser Bravo Three 2004 Aluminium Anode Kit
MerCruiser Bravo Three Aluminium anode kit to fit Mercury MerCrusier Bravo Three 2004 and onwards sterndrives.
Screws included.
For salt and brackish water use.
Tecnoseal MerCruiser Bravo Two And Three Aluminium Anode Kit
MerCruiser Bravo Two And Three Aluminium anode kit to fit Mercury MerCrusier Bravo Two and Three sterndrives.
Screws included.
For salt and brackish water use.
Tecnoseal Volvo Penta 280 Zinc Anode Kit
Volvo Penta 280 Zinc anode kit with screws to fit Volvo Penta 280 sterndrive.
For saltwater use
Zinc anodes are fitted as factory standard
Aluminium and Magnesium available to order
Tecnoseal Volvo Penta 280 Duo Prop Zinc Anode Kit
Volvo Penta 280 Duoprop Zinc anode kit with screws to fit Volvo Penta 280 Duoprop sterndrive.
For saltwater use
Zinc anodes are fitted as factory standard
Aluminium and Magnesium available to order
Tecnoseal Volvo Penta 290 Plus Zinc Anode Kit
Volvo Penta 290 Plus Zinc anode kit with screws to fit Volvo Penta 290 sterndrive.
Includes 2 x triangular plate anodes.
For saltwater use
Zinc anodes are fitted as factory standard
Aluminium and Magnesium available to order
Tecnoseal Volvo Penta 290 Duo Prop Plus Zinc Anode Kit
Volvo Penta 290 DuoProp Plus Zinc anode kit to fit Volvo Penta 290 Duoprop sterndrive.
Screws included.
For salt water use.
Tecnoseal Volvo Penta 290 Duo Prop Plus Aluminium Anode Kit
Volvo Penta 290 Duo Prop Plus Aluminium anode kit with screws to fit Volvo Penta 290 Duoprop sterndrive.
Includes 2 x triangular plate anodes.
For saltwater use
Zinc anodes are fitted as factory standard
Magnesium available to order
Tecnoseal Volvo Penta DPH/DPR Zinc Anode Kit
Comprehensive Volvo Penta DPH/DPR Zinc anode kit to fit Volvo DPH and DPR sterndrives.
Suitable for saltwater use.
Aluminium and Magnesium version also available.
Tecnoseal Volvo Penta DPH/DPR Magnesium Anode Kit
Comprehensive Volvo Penta DPH/DPR magnesium anode kit to fit Volvo DPH and DPR sterndrives.
Suitable for frshwater use.
Aluminium and Zinc version also available.
Tecnoseal Volvo Penta 130/150 Saildrive Split Zinc Collar Anode
Volvo Penta Saildrive zinc split collar anode to fit Volvo Penta Saildrive.
For saltwater use
Two parts with bolts included
Width: 140mm, Diameter: 110mm
Internal Diam: 45mm
Height: 40mm
Weight: 1.43kg
Volvo Ref: 3888305 / 3888306
Fits Series SD 130/150 - 2002/2003
Tecnoseal 4Kg Bolt on Zinc Anode 310mm
One of the most common hull anodes this Tecnoseal saltwater zinc bolt-on 4kg bar anode suitable for use on the hull.
Dimensions: L310mm x W75mm x H40mm
Weight: 4kg
13mm hole diameters
205mm hole centres
Tecnoseal ALUMINIUM Disc Anode
Tecnoseal ALUMINIUM disc anode for use on rudders and trim tabs.
Tecnoseal MAGNESIUM Disc Anode
Tecnoseal MAGNESIUM disc anode for use on rudders and trim tabs.
Tecnoseal 11 Kg Bolt on Zinc Anode 460mm
Tecnoseal saltwater zinc bolt-on anode as used by Princess, Fairline and Sunseeker.
Dimensions: L460 mm x W100mm x H45mm
Weight: 11 kg
19mm hole diameters
230mm hole centres
Tecnoseal Zinc Euro anode - Various sizes
Tecnoseal Mini Euro zinc bolt on bar anode for use on the hull.
For salt water use.
200 mm length, 65 mm width, 32 mm height
1.30 kg weight
12 mm hole size, up to 110 mm hole centres
Tecnoseal Pear Shape Bolt on anodes with strap
Bolt on anodes with strap teardrop type
Aluminium Rudder & Trim Tab Disc Anodes
Technoseal Rudder & Trim Tab Anodes
Perfect for attaching to rudders and trim tabs, these anodes are supplied as a pair with fixing bolt.
Being aluminium these anodes are lightweight and suitable for both fresh and salt water use.
R1AL: Dia. 47mm x H7mm x Bolt 6.5mm
R2AL: Dia. 72mm x H11mm x Bolt 7mm
R3AL: Dia. 92mm x H13mm x Bolt 8.5mm
R4AL: Dia. 127mm x H13mm x Bolt 9mm
Sold...
Tecnoseal ZD51 70mm Disc Anode (Pork Pie Anode)
Tecnoseal disc anode, traditionally known as a pork pie anode suitable for use on rudders and trim tabs.
For salt water use.
70 mm diameter, 25 mm height, 0.4 kg weight
11 mm hole size
MG Duff ZD52 Zinc Hull Anode
MG Duff disc Anodes are a popular choice for protecting various underwater components on boats and vessels from corrosion. These disc-shaped Anodes are typically made of high-quality materials like zinc, aluminium, or magnesium, each with its own specific advantages in different marine environments.. . . . .
Tecnoseal Zinc Disc Anode
Tecnoseal Zinc disc anode for use on rudders and trim tabs.
For salt water use.
70mm diameter,
13mm height,
0.19kg weight
8.5mm hole size
M10 Anode Fixing Stud c/w Connectors, Nuts & Washers
To ensure maximum electrical contact these anode fixing studs are supplied with all necessary fixings and connections.
Fitting Instructions:
Select a position on the hull that is under the waterline and preferably within the bilge of the boat.
Ensure the bolts are accessible inside the boat for tightening and so that connections can be attached and maintained.
The position should be aft of any depth...
Anode Backing Pad for hull anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit Pear Shape Hull Anode
Pad to fit pear shape hull anode
Anode backing sheet. Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
Anode Backing Pad to fit mm Button Anode
Anode backing Pad to fit 100 mm disc or button anode
Use on GRP or wooden boats to control the anode wasteage and protect the hull.
Replace when the anode is replaced.
MG Duff B76EURO Anode Backing Sheet ZD76 Mini Euro
Backing sheet for ZD76 Mini Euro
MG Duff B77EURO Anode Backing Sheet ZD77 Euro
Backing sheet for ZD77 Euro
MG Duff MGDA1 Aluminium Shaft Anode - 1 in
The MG Duff MGD range of shaft Anodes are known for their superior quality, and are particularly suited to vessels with high shaft speeds. Building on the integral core bar design that controls wastage, ensuring the shaft Anode remains secure, The MG Duff MGD range now incorporates socket head (allen bolt) stainless steel fixings with captive nuts to ensure maximum reliability. Available in a wide...
MG Duff Zinc Shaft Anode -
The MG Duff MGD range of shaft Anodes are known for their superior quality, and are particularly suited to vessels with high shaft speeds. Building on the integral core bar design that controls wastage, ensuring the shaft Anode remains secure, The MG Duff MGD range now incorporates socket head (allen bolt) stainless steel fixings with captive nuts to ensure maximum reliability. Available in a wide...
MG Duff Zinc Shaft Anode - Various Sizes
The MG Duff MGD range of shaft Anodes are known for their superior quality, and are particularly suited to vessels with high shaft speeds. Building on the integral core bar design that controls wastage, ensuring the shaft Anode remains secure, The MG Duff MGD range now incorporates socket head (allen bolt) stainless steel fixings with captive nuts to ensure maximum reliability. Available in a wide...
Tecnoseal 00504MG 28mm Magnesium Shaft Anode
00504MG – Tecnoseal Zinc 28mm Egg Type Standard Shaft Anode. With 2 fastening holes.
Fits shaft diameter 28mm.
For freshwater wate use.
Tecnoseal Sole Propeller Anode 24mm
Tecnoseal 24mm Sole propeller anode
Zinc conical propeller nut anode to fit Sole Diesel.
Internal diameter 24 mm.
For saltwater use.
Performance Metals Aluminium Shaft Anode - Various sizes
Performance Metals Premium Aluminum Sacrificial Anodes Performance Metals Premium Line of anodes is manufactured from Navalloy to a military specification MIL-A-24779(SH).
Navalloy is a high performance alloy! It contains aluminum, 5% zinc and traces of indium, which ensures that it stays active.
Navalloy is more active than zinc so it gives better protection. Navalloy anodes last up to 30% longer...
Tecnoseal Radice Conical Propeller Nut Anode - Various sizes
Tecnoseal 20/25mm Radice Conical Propeller Nut Anode
Zinc conical propeller nut anode to fit 22-25 mm shaft diameter.
For saltwater use.
Tecnoseal Radice Hexagonal Propeller Nut Anode - Various sizes
Tecnoseal 20/25mm Radice Hexagonal Propeller Nut Anode
Zinc hexagonal propeller nut anode to fit 20-25 mm shaft diameter.
For saltwater use.
Tecnoseal Max Prop Anode - Various sizes
Tecnoseal 39mm Max Prop Anode
Zinc propeller anode to fit Max Prop.
New 6 hole version which retrofits and replaces the old 3 hole version.
Overall diameter 61 mm, internal diameter 39 mm.
Tecnoseal Sole Propeller Anodes
Tecnoseal 26mm Sole propeller anode
Zinc conical propeller nut anode to fit Sole Diesel.
Internal diameter 26 mm.
For saltwater use.
Tecnoseal Zinc Shaft Anode - Various sizes
Tecnoseal zinc shaft anode
Standard Series Zinc Shaft Anode
2 fastening holes
Vetus Bow Thruster Anodes
Zinc Bow Thruster anodes specific to Vetus models listed below:
SET0148: 38mm dia. Models 25kgf, BOWA030
SET0149: 50mm dia. Models 35, 45, 55kgf, BOWA036, 042, 057, BOWB042, 057
SET0150: 60mm dia. Models 60, 75, 80, 95kgf, BOWA065, 076, 090, BOWB065, 076, 090
SET0151: 59mm dia. Models 125, 130, 160kgf, BOWA110
SET0152: 49mm dia. Models 220, 239, 285, 300, 310kgf
SET0153:
Sleipner Side-Power Bow Thruster Anode 31180A
Sleipner anode and Screw for SP30, SE30, SP40 and SE40 (1 needed)
Sleipner Side-Power Bow Thruster Anode 71190 / A
Sleipner anode and Screw for SP55S, SE60/185S, SP75T, SE80/185T, SP95T and SE100/185T models
1 needed for S models
2 needed for T models
Sleipner Side-Power Bow Thruster Anode 201180
Sleipner anode and Screw for SP125T-285TC, SE120, SE150, SP220/300HYD and SH160 Composite Props (2 needed)
Side-Power genuine part