TCS Chandlery
Grid
List
Navman 40640 30 Knot Thru Hull Speed Transducer LT8 Blue Plug
Navman 40640 30 Knot Thru Hull Speed Transducer LT8 Blue Plug
Navman Part Number 42434
30 kn Removable sensor
( 1 5/8")
8m / (26 ft) —Cable
LT8
Fits 8120, 8084, TF6600, TF6500, F4607, F4507, F4380, F4433, F4431, S3100, M3100 4064
No skin fitting etc with this only what is in the picture
Flexolite De-Luxe Butane Camping Stove
New old stock
In dusty box but complete and unused (not supplied with gas bottle)
Mains Consumer Unit
Fully compliant boat ABS mains consumer unit supplied with a clear polycarbonate hinged lid and rated to IP55.
Suitable for wiring a boats 240v electric system from the mains shore power inlet and distributing to the onboard socket outlets with a spare circuit breaker for water immersion heater giving full circuit protection.
40 Amp RCCB
1 x 6 Amp MCB
1 x 16 Amp MCB
IP55 Rated
ABS Case
Earth...
M10 Anode Fixing Stud c/w Connectors, Nuts & Washers
To ensure maximum electrical contact these anode fixing studs are supplied with all necessary fixings and connections.
Fitting Instructions:
Select a position on the hull that is under the waterline and preferably within the bilge of the boat.
Ensure the bolts are accessible inside the boat for tightening and so that connections can be attached and maintained.
The position should be aft of any depth...
Flexible Orange Gas Hose
Flexible orange gas hose suitable for butane and propane gas systems.
BS3212 (Type 2)
RCD Approved
Internal Diameter: 8mm, 10mm
Sold per meter
Low Odour White Sanitation Hose
Low odour white sanitation waste hose prevents unpleasant smells permeating through the wall of the hose.
Odour free hose ideal for use with marine sea toilets in the heads.
Minimises unpleasant smells.
19mm, 25mm, 38mm internal diameter
Sold per Mtr
EzSense Portable Gas Sensor
EzSense portable gas sensor is as its name implies completely portable and handheld.
Suitable for tracing all gas leaks in and around pipes, joints, cookers and fires.
An alarm sounds when gas is detected and a yellow or red LED will light up depending on gas concentration.
Size: 180mm x 30mm
Detectable Gases: LNG, LPG, Butane, Methane & Isobutane
Emergency Exit Sign 96 x 24 mm Bakelite
Emergency Exit Sign 96 x 24 mm Bakelite
Liferaft Emergency Sign 40 x 40 mm Bakelite
Liferaft Emergency Sign 40 x 40 mm
Cooker Gas Tap Emergency Sign 50 x 25 mm Bakelite
Cooker Gas Tap Emergency Sign 50 x 25 mm Bakelite
Generator Fuel Tap Emergency Sign 50 x 25 mm Bakelite
Generator Fuel Tap Emergency Sign 50 x 25 mm
Heater Fuel Tap Emergency Sign 50 x 25 mm Bakelite
Heater Fuel Tap Emergency Sign 50 x 25 mm
Fridge Gas Tap Emergency Sign 50 x 25 mm Bakelite
Fridge Gas Tap Emergency Sign 50 x 25 mm
Below / Under Emergency Sign 50 x 15 mm Bakelite
Below / Under Emergency Sign 50 x 15 mm Bakelite
Behind Door Emergency Sign 50 x 15 mm Bakelite
Behind Door Emergency Sign 50 x 15 mm
Domestic Emergency Sign 38 x 19 mm Bakelite
Domestic Emergency Sign 38 x 19 mm Bakelite
Rinse Out Emergency Sign 38 x 19 mm Bakelite
Rinse Out Emergency Sign 38 x 19 mm Bakelite
Engine Emergency Sign 38 x 19 mm Bakelite
Engine Emergency Sign 38 x 19 mm Bakelite
Pump Out Emergency Sign 38 x 19 mm Bakelite
Pump Out Emergency Sign 38 x 19 mm Bakelite
Lifejacket Servicing and Maintenance
It is recommended that gas inflating lifejackets are serviced on a regular basis to ensure replacement of out of date, faulty or corroded parts. Our service will consist of a full inspection, pressure test and replacement of faulty parts and you will be supplied with a certificate of conformity.
All crew, harbour and port wearers of gas inflation lifejackets should be familiar with the correct operational...
RA138 PVC Protection For All Sizes Of PL259
PVC Protection For All Sizes Of PL259.
RA138 - THREADED RUBBER PROTECTION FOR PL259 CONNECTORS
Synthetic rubber threaded protection for PL259 connectors
Premium Windsock with Wire Harness - 4ft (120cm)
Premium Windsock manufactured in high visibility dayglow orange which offers supperior quality compared to many other industry grade windsocks.
Fitted with integral 'sewn in' stainless steel mouth ring and four way stainless steel wire harness with stainless steel swivel shackle the Windsock is suitable for inland, coastal and offshore use even in harsh wind conditions.
Conforms to the requirements...
Premium Windsock with Wire Harness - 5ft (152cm)
Premium Windsock manufactured in high visibility dayglow orange which offers supperior quality compared to many other industry grade windsocks.
Fitted with integral 'sewn in' stainless steel mouth ring and four way stainless steel wire harness with stainless steel swivel shackle the Windsock is suitable for inland, coastal and offshore use even in harsh wind conditions.
Conforms to the requirements...
Premium Windsock with Wire Harness - 6ft (182cm)
Premium Windsock manufactured in high visibility dayglow orange which offers supperior quality compared to many other industry grade windsocks.
Fitted with integral 'sewn in' stainless steel mouth ring and four way stainless steel wire harness with stainless steel swivel shackle the Windsock is suitable for inland, coastal and offshore use even in harsh wind conditions.
Conforms to the requirements...
Premium Windsock with Wire Harness - 7ft (213cm)
Premium Windsock manufactured in high visibility dayglow orange which offers supperior quality compared to many other industry grade windsocks.
Fitted with integral 'sewn in' stainless steel mouth ring and four way stainless steel wire harness with stainless steel swivel shackle the Windsock is suitable for inland, coastal and offshore use even in harsh wind conditions.
Conforms to the requirements...
Premium Windsock with Wire Harness - 8ft (244cm)
Premium Windsock manufactured in high visibility dayglow orange which offers supperior quality compared to many other industry grade windsocks.
Fitted with integral 'sewn in' stainless steel mouth ring and four way stainless steel wire harness with stainless steel swivel shackle the Windsock is suitable for inland, coastal and offshore use even in harsh wind conditions.
Conforms to the requirements...
Hi-Vis Yellow Traffic Jacket - To Clear
We are clearing our remaining stock of this fully certified waterproof jacket is a popular option across many industries. Hard-wearing, functional and packed full of features including a drawstring hood, studded storm flap and multiple storage pockets.
Features:
CE certified
Waterproof with taped seams preventing water penetration
Extremely water resistant fabric finish, water beads away from fabric...
W = Marine 1" Rubber Sanitation Hose 11 Metre Length to Clear
Top Quality W = Marine rubber toilet sanitation hose 1" id
One length of 11 metres
This is old new stock
Hose dated 04/2003
Outside rubber has discoloured some what
Was £9 per meter
75mm Laminating Paddle Roller
High quality steel paddle roller designed for distributing resins to through heavy matt cloths.
Laminating Paddle Roller 48mm dia x 75mm wide
Plastic handle
Sealant Caulking Gun
Sealant Caulking Gun
A lightweight caulking gun for use with 310ml sealant cartridges.
Universal Stainless Steel Liferaft Cradle
A premium liferaft cradle manufactured in 316 stainless steel, which is fully adjustable and designed to fit most makes of canister liferaft from 4 to 12 persons.
The cradle can be mounted either vertically or horizontally on the pushpit, coach roof or transom and the raft is held in place with a strap which retains the liferaft securely and allows quick release.
Fixing bracket supplied as standard...
10w Festoon Bulb
10w standard festoon bulb suitable for interior, exterior and navigation lights.
42mm long
12v or 24v
Syphon Pump 16ltr
Syphon Pump 16ltr
Suitable for the transfer of liquids including oil, petrol & water.
Suitiable for 45 gallon drums
Jet Logic PWC Screw Anchor System
Jet Logic, Screw Anchor System. Perfect for anchoring a PWC in shallow water, just off the beach.
Screw the zinc-plated anchor into compacted sand or mud in 2 to 3 ft. of water
There's a giant nylon snap hook at each end of the 8 ft. long marine grade rope
Snap one to the screw anchor and the other to your Jetski,PWC or small boat
A padded nylon storage case protects watercraft and dampens noise...
Kannad Safelink R10 AIS MOB Device
SAFELINK R10 SURVIVAL RECOVERY SYSTEM AIS MOB
The Safelink R10 SRS is a revolutionary personal safety aid designed to be mounted on a life jacket using the attachment clips provided. It can be manually activated or can be semi-automatic if professionally fitted to certain types of gas inflation life jackets.
The built in AIS (Automatic Identification System) transmits target survival information including...
Galvanised Calibrated Anchor Chain
Suitable for anchoring and general use our hot dipped galvanised chain is short link metric suitable for use with most european windlass gypsies.
Hot Dip Galvanised
Grade 30 - perfect as anchor chain
Priced per metre
6mm Chain: ISO/DIN766 calibration
• Weight per metre: 0.81kg
8mm Galvanised Chain • ISO/DIN766 calibration
• Weight per metre: 1.45kg
10mm Galvanised...
30mtr x 6mm Calibrated Galvanised Chain
6mm calibrated galvanised anchor chain in 30mtr bundle saving you ££'s of the usual price.
The chain is calibrated to DIN766 to ensure even pitch and perfect fit in the windlass gypsy.
Supplied in hot dipped galvanised finish to DIN766
30mtr Bundle
30mtr x 8mm Calibrated Galvanised Chain
8mm calibrated galvanised anchor chain in 30mtr bundle saving you ££'s of the usual price.
The chain is calibrated to DIN766 to ensure even pitch and perfect fit in the windlass gypsy.
Supplied in hot dipped galvanised finish to DIN766
30mtr Bundle
30mtr x 10mm Calibrated Galvanised Chain
10mm calibrated galvanised anchor chain supplied in 30mtr bundle saving you ££'s of the usual price.
The chain is calibrated to ISO standard to ensure even pitch and perfect fit in the windlass gypsy.
Supplied in hot dipped galvanised finish to ISO
30mtr Bundle
Weatherproof Junction Box
Weatherproof Junction Box
Neoprene rings ensures waterproof seal. Complete with 8 pole connector strip.
Overall length including rubber ends - 150mm Width - 75mm Height inc screw -45mm
Index Marine JB/BB6 Junction Box with 6 Way Busbar
Index Marine JB/BB6 Junction Box with 6 way busbar
An JB3PB junction box complete with 8 grommeted cable entry / exit holes and 6 way busbar F2241 Colour:
Grey Material: High impact resistant ABS plastic
Size: 111mm x 60mm x 31mm
Chrome 5 Amp 3 Pin Socket Only (No Plug)
Chromed plated brass 5 amp 3 Pin Socket only (no plug per image)
5A rated
Polarity protected waterproof connection
Picture for reference only as shows 2 pin but if ordered you will get a 3 Pin Socket
Chrome 3 Amp 3 Pin Socket Only (No Plug)
Chromed plated brass 3amp 3 Pin Socket only (no plug as per image)
3A rated
Polarity protected waterproof connection
Platinum Deep Cycle Sealed Marine Batteries
Our Marine batteries are specifically designed for boats engine start and auxillary use and to be continually ' cycled ', meaning that energy is taken out (discharged) and then energy put back in to the battery (recharged), via a battery charger or the Engines Alternator.
A semi traction deep cycle marine battery incorporates thicker grids (plates) for extended life, designed for boats the...
Fender Lines with Spliced Soft Eye 8mm x 2mtr (Pack of 4)
Set of 4 fender lines / lanyards which have a spliced, tapered soft eye one on one end, to allow the fender line to be looped through the fender and then back through the eye which enables easy removal.
The other end is carefully heat sealed to prevent fraying.
Other sizes, lengths and colours can be made to order. please call our sales office for details.
8mm Diameter 3 Strand Rope
2mtrs...
A1 Marine Grade Fuel Hose
A1 Marine Grade Fuel Hose
Suitable for all marine engine fuel line systems with a temp range -35ºC to +100ºC, also oil resistant suitable for most applications including vent breather.
Fuel (petrol/diesel) resistant
Manufactured to EN ISO7840
Heat, oil, abrasion resistant
Internal diameter: 6mm, 8mm, 10mm, 12.5mm, 16mm, 19mm
Price per mtr
A2 Marine Grade Fuel Hose
A2 Grade Marine Fuel Hose
Suitable for all marine engine fuel systems with a temp range -35ºC to +100ºC, also oil resistant suitable for most applications including vent breather.
Fuel (petrol/diesel) resistant
Manufactured to EN ISO7840
Heat, oil, abrasion resistant
Wire reinforced suitable for deck filling
Internal diameter: 38mm, 50mm
Price per mtr
Marine Rubber Exhaust Hose 40mm - Lloyds Approved
Lloyds Approved Marine Exhaust Hose manufactured with salt water resistant EPDM rubber and double steel helix wire reinforcing.
This strong rubber hose provides more flexibilty than other similar hoses allowing easier installation throughout the boat, ideally suited for marine applications.
It is essential to use heavy duty stainless steel hose clamps when fitting this type of hose as regular...
