Aquafax
Stainless Steel Round Sink 285mm diameter
285mm diameter Round Sink
Stainless steel round sink which makes a very attractive addition to any galley on a boat but also suitable for caravans, motor homes and catering units .
Mirror polished stainless supplied with plug, chain and waste outlet which requires connection to 1" (25mm) waste hose.
Size: O/A 285mm dia. x Depth 180mm (ID 260mm dia)
Stainless Steel Round Sink 330mm diameter
330mm diameter Round Sink
Stainless steel round sink which makes a very attractive addition to any galley on a boat but also suitable for caravans, motor homes and catering units .
Mirror polished stainless supplied with plug, chain and waste outlet which requires connection to 1" (25mm) waste hose.
Size: O/A 330mm dia. x Depth 180mm (ID 300mm dia)
S/S Rectangular Sink 320 x 260 x 150mm
Rectangular Sink
Stainless steel rectangular sink which makes a very attractive addition to any galley on a boat but also suitable for caravans, motor homes and catering units .
Satin finish stainless supplied with plug, chain and waste outlet which requires connection to 1" (25mm) waste hose.
Bed down and fix using a suitable waterproof sealant
Size: O/A L320mm x W260mm x...
S/S Rectangular Sink 320 x 170 x 150mm
Rectangular Sink
Stainless steel rectangular sink which makes a very attractive addition to any galley on a boat but also suitable for caravans, motor homes and catering units .
Satin finish stainless supplied with plug, chain and waste outlet which requires connection to 1" (25mm) waste hose.
Bed down and fix using a suitable waterproof sealant
Size: O/A L320mm x W170mm x...
S/S Rectangular Sink 350 x 320 x 150mm
Rectangular Sink
Stainless steel rectangular sink which makes a very attractive addition to any galley on a boat but also suitable for caravans, motor homes and catering units .
Satin finish stainless supplied with plug, chain and waste outlet which requires connection to 1" (25mm) waste hose.
Bed down and fix using a suitable waterproof sealant
Size: O/A L350mm x W320mm x...
Moisture Mate Absorber
Moisture Mate helps keep unwanted moisture under control, reducing the risk of condensation, damp, midew and unpleasant smells.
Each unit comes with enough absorption crystals to remain active for up to 3 months. The handy sized refill bags mean your Moisture Mate is infinitely reusable.
ECS Ventilite Clear Roof Vent c/w S/S Cover
ECS VENTILITE CLEAR ROOF VENT C/W S/S COVER)
THE ECS VENTIDUCT SYSTEM
This is one of the original ventilation systems specifically designed for marine use and is still one of the best. It is a proven reliable product; with thousands of units installed on both commercial and pleasure craft throughout the world in the last four decades.
VENTAIR & VENTILITE STATIC VENTILATORS
Attractive ventilator...
ECS Ventilite Shut Off Vent c/w S/S Cover
ECS VENTILITE SHUT-OFF VENT WITH COVER
These are a completely waterproof version of the ECS Ventair/Ventilite ventilators. In cases of excessive water flow over the decks or coach roof, an inner sleeve complete with flush handle, is closed by moving in an upward direction to ensure 100% waterproofing.
This simple operation is carried out from within the cabin or wheelhouse, and vice versa; a downward...
Water Lubricated Cutlass Shaft Bearing 1.625" x 2.25" x 6.5"
Countrose shaft or cutlass bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell.
The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads.
The bearings support the shaft...
Inline Plastic Diesel Filter 6/8mm Hose
Diesel Filter
Inline Plastic Diesel Filter 6/8mm Hose 2000 cc max
Easy to fit with suitable hose clips
Heavy Duty Stainless Steel Hose Clamp 48-51mm (40mm hose)
Hose Clamp 48-51mm
Heavy duty stainless steel hose clamps for use with marine exhaust hose.
Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
Heavy Duty Stainless Steel Hose Clamp 52-55mm (45mm hose)
Hose Clamp 52-55mm
Heavy duty stainless steel hose clamps for use with marine exhaust hose.
Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
Heavy Duty Stainless Steel Hose Clamp 60-63mm (50mm hose)
Hose Clamp 60-63mm
Heavy duty stainless steel hose clamps for use with marine exhaust hose.
Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
Heavy Duty Stainless Steel Hose Clamp 68-73mm (63mm hose)
Hose Clamp 68-73mm
Heavy duty stainless steel hose clamps for use with marine exhaust hose.
Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
Heavy Duty Stainless Steel Hose Clamp 86-91mm (75mm hose)
Hose Clamp 86-91mm
Heavy duty stainless steel hose clamps for use with marine exhaust hose.
Using a socket or a screw driver, these clamps will tighten down on the wire reinforced hose giving a secure fixing.
Grease Cup 1/4 BSP 40mm OD
Grease Cup
“Stauffors” type grease cups in hot stamped brass suitable for stern tube lubrication or other onboard applications.
For best performance, once installed pack tightly with white marine grease.
Grease Cup Sizing:
BSP Male Thread Size x O/A Dia. x Max Height
1/4' x 40mm x 42mm
Grease Cup 1/8' BSP x 33mm
Grease Cup
“Stauffors” type grease cups in hot stamped brass suitable for stern tube lubrication or other onboard applications.
For best performance, once installed pack tightly with white marine grease.
Grease Cup Sizing:
BSP Male Thread Size x O/A Dia. x Max Height
1/8' x 33mm x 40mm
Plastic Exhaust Waterlock Silencer
Waterlock Silencer
A high quality plastic exhaust waterlock silencer suitable for 40, 45 & 50mm dia exaust hose.
When installed within the exhaust system it will dramatically reduce noise
Size: 640L x 225W x 230H
Engine Fuel Water Separator
Water and contaminants accumulating in the fuel tank can often cause engine failure.
Suitable diesel engines up to 200hp.
The separator filter has an aluminium head unit with replacable fuel filter and a transparent plastic water bowl.
Supplied with a drain plug.
Fuel line connections supplied separately.
Engine Fuel Water Separator Replacement Filter
Replacement Filter
Standard filter cartridge for CAV filter heads resistant to corrosion and used on many marine engines.
Engine Fuel Water Separator Hose Connection Kits
Hose Connection Kit
Fuel line connections
Connections: M14 x 1.5 female thread
9 Litre Oil Drain Can
HEAVY DUTY 9 LITRE OIL DRAIN CANPlastic oil drain can, ideal for safe and clean oil sump drain. Dimensions: (H x W x D) 39 x 29 x 12.5cm
Labcraft Nebula Switched LED Strip Light 6w
Labcraft LED Nebula Strip Light
12V - 6W - 624mm Long - Switched
Long life, high intensity Cree LEDs The Nebula incorporates the Orizon LED strip light, which uses the latest in LED technology, offering optimum performance and extended life. The properties of these LEDs give greater luminosity, allowing us to offer a brighter unit whilst using fewer LEDs to maintain the low power draw. The...
LED Festoon Bulb 42mm 8-35V
LED Festoon Bulb
Electrical Light Bulbs LED
High luminosity light output with low energy consumption
Lasts up to 10 times longer than conventional lightbulbs
Very low heat output, maximum temperature of 40ºC
Direct light output, 2W LED can be compared to one 20W halogen light
Low wattage, long lasting LED replacement for intrior and exterior lights with...
TK Clear Antifouling Spray
TK Anti-fouling is an antivegetative paint for the protection of gears and propellers in a practical spray package.
It does not contain tin or copper compounds but carries out its action emanating organic non polluting poisons.
Antivegetative with hard matrix indicated for average & high speed.
This Product is suitable for trailed day boats or boats that are short term use and not left in the...
Shore Power Bulk Surface Mount Inlet 16amp
16amp surface mount inlet socket
16A Splashproof inlet (male) - allows mains connection. Ideal for boat or caravan.
For use with 16A / 230V fittings.
Splashproof rating of IP44
Shore Power Flush Mount Inlet 16amp
16amp Flush mount inlet socket with flap cover .
For installing on the Boat to recieve 240v shore power
Dimensions
105 mm x 110 mm x80 mm (WxHxD)
Flap size (approx): 107mm x 110mm
Cutout required (approx): 80mm (W) x 88mm (H) x 85mm (D)
Protected to IP44
Aravon Chromed Brass Single Tap
Very high quality, brass single tap in chrome / crystal made by a top Italian tap maker for pressure switch systems.
Spout lowers
3⁄8'' BSP(M) inlet
A
B
C
D
E
F
G ...
Aravon Chromed Brass Twin Mixer Tap
Chromed Brass Taps,
Spout lowers
3⁄8'' BSP(M) inlets
A
B
C
D
E
F
G
Hole Ø
50-160
205
Max 170
30
120
85
70
2 x 17
3/8' Hose Tails not supplied
Chrome Mixer Tap
Monobloc Sink Mixer Long Spout- Chrome
Single control mixer with ceramic valve and swivelling spout.
A
B
C
D
E
G
Hole Ø
Connections
205
130
110
55
45
120
34
3/8" BSP (F)
Chromed Brass Monobloc Pull Out Shower Mixer Tap
Chromed Brass mixer tap with pull out shower aperture 37mm size 120mm
Comes with 2.5m white shower hose
3⁄8'' BSP(M) flexible inlets
A
B
C
D
E
F
G
Hole Ø
130
110
95
55
160
-
75
44
Aravon Chromed Brass Monobloc Mixer Tap
Sink mixer
compact design with swivelling spout.
Swivel spout
Supplied with 3⁄8'' BSP(M) flexible inlets
A
B
C
D
E
F
G
Hole Ø
170
242
185
35
135
-
65
34
Stainless Steel Destroyer Wheel 500mm 5 Spoke
Stainless Steel RIM Destroyer wheel.
All Savoretti Armando steering wheels conform with 94/25/CEE directives.
UNIEN 28848 UNI ISO 29775.
Rina Certificate DIP26897
50cm Diameter
SPOKES: 5 stainless steel spokes for diameter 500 mm
GRIP: Stainless Steel
HUB: Stainless steel
CENTRE CAP: Teak Wood and Stainless steel
CONNECTION: Standard ¾” taper or on request
SHAPE:...
Stainless Steel Destroyer Wheel 600mm 6 Spoke
Stainless Steel RIM Destroyer wheel.
All Savoretti Armando steering wheels conform with 94/25/CEE directives.
UNIEN 28848 UNI ISO 29775.
Rina Certificate DIP26897
60cm Diameter
SPOKES: 6 stainless steel spokes from diameter 600mm
GRIP: Stainless Steel
HUB: Stainless steel
CENTRE CAP: Teak Wood and Stainless steel
CONNECTION: Standard ¾” taper or on request
SHAPE:...
Barrel Bolt 64mm
Chromed Brass
64 mm
Barrel Bolt 76mm Necked/Cranked
Chromed Brass Barrel Bolt
Cranked/Necked
76mm
Battery Terminals Screw fixing up to 40mm² Cable
Battery Terminal screw fixing for cable up to 40mm².
Sold in pairs (ie. 1 x + ve, 1 x - ve)
Battery Terminals Screw fixing up to 60mm² Cable
Battery Terminal screw fixing for cable up to 60mm².
Sold in pairs (ie. 1 x + ve, 1 x - ve)
Battery Terminals Screw fixing up to 70mm² Cable
Battery Terminal screw fixing for cable up to 70mm².
Sold in pairs (ie. 1 x + ve, 1 x - ve)
Battery Terminals M8 Stud & Wing Nut
Battery Terminal with M8 stud post and wing nut.
Sold in pairs (ie. 1 x + ve, 1 x - ve)
Tinned Copper Tube Stud Terminals 50mm² Cable 8mm Stud
Tinned Copper tube stud terminals With inspection hole, suitable for crimping or soldering.
Sold in singly
Tinned Copper Tube Stud Terminals 70mm² Cable 8mm Stud
Tinned Copper tube stud terminals With inspection hole, suitable for crimping or soldering.
Sold in singly
Crimp Pre Insulated Butt Connectors
High quality pre insulated terminals. All the terminals are U.L. or C.S.A. approved. Manufactured from tinned copper complete with anti vibration rings (except forks & rings) Sold in a pack of 10
Red Insulation: Conductor size 0.5-1.5mm² / 22-16awgBlue Insulation: Conductor size 1.5-2.5mm² / 16-14awgYellow Insulation: Conductor size 4.0-6.0mm² / 12-10awg
Crimp Pre Insulated Ring Terminals
High quality pre insulated terminals. All the terminals are U.L. or C.S.A. approved. Manufactured from tinned copper complete with anti vibration rings (except forks & rings) Sold in a pack of 10
Red Insulation: Conductor size 0.5-1.5mm² / 22-16AWGBlue Insulation: Conductor size 1.5-2.5mm² / 16-14AWGYellow Insulation: Conductor size 4.0-6.0mm² / 12-10AWG
Pre Insulated Male Tab Terminals
High quality pre insulated terminals. All the terminals are U.L. or C.S.A. approved. Manufactured from tinned copper complete with anti vibration rings (except forks & rings) Sold in a pack of 10
Red Insulation: Conductor size 0.5-1.5mm² / 22-16AWGBlue Insulation: Conductor size 1.5-2.5mm² / 16-14AWGYellow Insulation: Conductor size 4.0-6.0mm² / 12-10AWG
Crimp Full Insulated Female Spade Terminals
High quality pre insulated terminals. All the terminals are U.L. or C.S.A. approved. Manufactured from tinned copper complete with anti vibration rings (except forks & rings) Sold in a pack of 10
Red Insulation: Conductor size 0.5-1.5mm² / 22-16AWGBlue Insulation: Conductor size 1.5-2.5mm² / 16-14AWGYellow Insulation: Conductor size 4.0-6.0mm² / 12-10AWG
Nickel Plated Brass Lever Handle Ball Valve 1/2" BSP
Brass Ball Valve 1/2" BSP
A versatile and competetively priced good quality Italian made full flow ball valve suitable for marine seacock installations, industrial, pneumatic & hydraulic installations, including gasoline, fuel oils, kerosene, petrol & diesel.
Minimum 100,000 operation design
90 degree movement by either lever or tee handle
Ideal for hot & cold water, different...
