Featured Products
Outboard Tiller Extension Handle - 633-1013mm
Universal, telescopic outboard tiller extension, manufactuered in anodised aluminium to prevent corrosion with plastic grip.
Easily clamped to the outboard tiller by the clamp screw.
Adjustable Length: 633-1013mm
Universal fitting
35mm/45mm dia.
£21.95
Outboard Motor Storage Bracket
Outboard Engine Storage Bracket
A rail mount plastic Outboard Motor Storage Bracket for smaller horsepower engines.
The two halves of the pad are positioned either side of the pushpit or pullpit rails and clamped in place using fixings provided.
Rail Mount Outboard Storage Bracket
Plastic outboard storage bracket for mounting on 25mm dia. tube.
The bracket is supplied in 2 halves with vertical and horizontal openings allowing the bracket to be easily fitted to pushpit or pullpit rails.
Size: L165mm x W175mm
Waveline Adjustable Auxillary Outboard Engine Bracket
An adjustable auxillary outboard motor bracket that will fit to the transom and adjust through four positive lock-in positions given multiple options for engine height.
The plywood pad is mounted to a sprung loaded anodised aluminium frame.
4 position lock-in
Spring and moving parts made of stainless steel.
Safety catch and wooden pad.
Up to 15hp (up to 40Kg)
Fixings not included
Plastimo Auxillary Outboard Engine Bracket
10hp Auxillary Outboard Bracket
The motor the bracket will take outboard motors up to 10hp, is made from stainless steel and has a polypropylene pad, it is mounted with 4 bolts (not supplied) and it offers 355mm lift.
316 st.steel structure
304 st.steel springs
Pad : Polypropylene
Height of pad : 265 mm. Width (pad top) : 210 mm. Width (pad base) : 160 mm.
Thickness of pad : 45 mm.
Height...
Davis Doel Fin Outboard Hydrofoil
The Doel Fin Hydrofoil is the original outboard engine hydrofoil developed by an aeronautical engineer to improve overall boat performance, by creating less drag the fuel efficiency and safety are massively improved.The fins are supplied with mounting hardware and designed to be bolted directly to the cavitation plate.
Two unbreakable plastic fins
Improves fuel consumption
Lower planning speeds
Faster...
Outboard Hydrofoil 4 - 50hp
Outboard Hydrofoil
Made of black polyamide, universal size for outboard engine power.- Fitting onto the plate- Consumes less power- No cavitation phenomena- Greater navigation stability and an attitude that is more sensible to adjustments on the Trim- Fuel saving- Mounting in 5 minutes
Outboard Hydrofoil 50HP +
Outboard Hydrofoil
Made of black polyamide, universal size for outboard engine power.- Fitting onto the plate- Consumes less power- No cavitation phenomena- Greater navigation stability and an attitude that is more sensible to adjustments on the Trim- Fuel saving- Mounting in 5 minutes
Fulton Outboard Motor Lock
Fulton outboard motor lock for securing your engine to the transom of your tender or engine storage bracket.
Suitable for lower horsepower and removable outboard engines, the securing screws are positioned horizontally and the lock slips easily over the securing screws. A padlock sits within the body of the Fulton Lock preventing its removal and preventing theft of the outboard.
Supplied with padlock...
Outboard Motor Bolt Lock
Outboard Engine Security Bolt Lock
Secure your outboard engine to the transom by installing the stainless steel key operated bolt lock on one of the existing mounting bolts. Most insurance companies would recommend this type of product for larger horsepower engines which are unlikly to be removed for storage.
Body made of S/S 303 with Brass lock
Supplied with PVC lock protection cover and...
Talamex Outboard Motor Lock S/S
Outboard Lock
Stainless steel AISI 316 with cylinder lock and floating key ring. Size: 300 x 40 x 35mm.
Burg Wachter Marine Padlock - 40mm
Seawater Proof Padlock - Completely rustproof inside and out.
Ideal for securring boats, outboard engines and lockers
Plastic bumper protects gelcoat and fittings
Solid brass body
Stainless steel shackle
Double bolted
40mm body
Outboard Tiller Extension Handle - 633-1013mm
Universal, telescopic outboard tiller extension, manufactuered in anodised aluminium to prevent corrosion with plastic grip.
Easily clamped to the outboard tiller by the clamp screw.
Adjustable Length: 633-1013mm
Universal fitting
35mm/45mm dia.
HelmsMate Basic " 75 cm " Fixed Length Outboard Tiller Extension
Enjoy improved comfort and boat trim with full steering and throttle control without having to sit next to the motor.
75cm Fixed Length HelmsMate outboard tiller extension features:
Fits outboard engines up to 30hp
Maintain full steering and throttle control
Fits 30mm to 43mm handle size
Rugged aluminum and stainless steel shaft and fittings
Lifetime warranty
HelmsMate Extendable 88 -125cm Outboard Tiller Extension
Enjoy improved comfort and boat trim with full steering and throttle control without having to sit next to the motor.
HelmsMate extendable outboard tiller extension features:
Fits outboard engines up to 30hp
Maintain full steering and throttle control
Fits 30mm to 43mm handle size
Adjustable length 88cm to 125cm
Rugged aluminum and stainless steel shaft and fittings ...
HelmsMate U-Joint 88 - 125cm Outboard Tiller Extension
Enjoy improved comfort and boat trim with full steering and throttle control without having to sit next to the motor.
HelmsMate extendable outboard tiller with universal joint features:
Fits outboard engines up to 30hp
Maintain full steering and throttle control
Fits 30mm - 43mm handle size
Adjustable 88cm - 125cm
Stainless steel universal joint for maximum versatiltiy
Rugged aluminum...
Outboard Transom Pad Protector
Outboard Transom Pad Protector
Anodised aluminium pad to prevent outboard clamps from damaging the transom.
200mm x 95mm
With loop for security cable fastening
Waveline Outboard Engine Primer Bulbs
Primer Bulb
Outboard engine fuel line primer bulb with large capacity ensuring maximum fuel flow.
Fit within the fuel line close to the outboard engine
Outboard Motor Flusher
Outboard Motor Flusher
Single intake, universal engine flushers with round cups and suitable for use with most smaller outboard motors.
280mm long
For larger outboard engines (40/50hp and above) you are advised to use Double Intake flushers to ensure sufficient water circulation.
Double Intake Outboard Flusher
Outboard Motor Flusher
An outboard engine fusher with double water intake ensuring maximum water flow when flsuhing the engine after use.
A customer favourite for engines over 50HP
• Dual Water Feed
• Improved Water Flow with rectangular cups will virtually eliminate water leakage for higher-pressure flushing
• For use on all lower units with side water inlets
430mm long
Inline Petrol Filter 6/8mm Hose
Petrol Filter 6/8mm Hose
Plastic Inline Petrol Filter 2000cc Max 6/8mm Hose
Full Outboard Engine Cover - Small
Small Size Full Outboard Engine Cover
For engine sizes 2.5 to 10 Horsepower
Size: W 75 x H 125 X A 35 cm
Made of Alu coated Extra Strong 300 Denier polyester Fabric
Both UV Resistant & Water Resistant.
Available in 3 sizes
S: W 75 x H 125 x A 35 cm
M: W 87 x H 157 x A 55 cm
L: W 125 x H 210 x A 75 cm
Colour: Silver Grey
Please take the following into consideration when choosing...
Full Outboard Engine Cover - Medium
Medium Size Full Outboard Engine Cover
For engine sizes 8 to 70hp
Size: W 87 x H 157 X A 55 cm
Made of Alu coated Extra Strong 300 Denier polyester Fabric
Both UV Resistant & Water Resistant.
Available in 3 sizes:
S: W 75 x H 125 x A 35 cm
M: W 87 x H 157 x A 55 cm
L: W 125 x H 210 x A 75 cm
Colour: Silver Grey
Please take the following into...
Full Outboard Engine Cover - Large
Large Size Full Outboard Engine Cover
For engine sizes 70 to 150 Horsepower
Size: 125 W x 210 H x A 75 cm
Made of Alu coated Extra Strong 300 Denier polyester Fabric
Both UV Resistant & Water Resistant.
Available in 3 sizes
S: W 75 x H 125 x A 35 cm
M: W 87 x H 157 x A 55 cm
L: W 125 x H 210 x A 75 cm
Colour: Silver Grey
Please take the following into consideration when...
Hi Visibility Propeller Bag
Hi Visibility Propeller Bags
A real must have if you are towing and the outboard engine or outdrive is exposed.
Made of bright nylon with a draw string cord.
Towing without a prop bag warrants points on your licence
Sizes: ("W" = width across drawcord)
Small: W50cm x L50cm
Medium: W60cm x L65cm
Large: W75cm x L65cm
Extra Large: W90cm x L1000cm
Waveline Universal Boat Kill Switch Keys with Lanyard
Key universal lanyard,
Features internal core, meets RYA specification,
Coiled lanyard
Fits: Johnson, Evinrude, Mercury, Yamaha, Hidea, Suzuki & Honda
Davis Motor Caddy Lifting Harness
Davis Motor Caddy
Provides a removable secure handle for safely raising, lowering and carrying the outboard engine.
The Outboard Lifting harness is suitable for most 2 and 4 stroke outboard engines from 2hp to 15hp and is made of tough UV rated materials.
The engine harness is removable but can also be left in place and the self centreing handle serves as an attachment point for halyards and hoists.
Talamex Engine Cut Out / Kill Switch Inboard/Outboards
Cut Out Switch
So called dead mans button. Safety switch for use on speedboats.
2-50327 CEF O/B Impeller Honda Suzuki 5 HP BF50
Make
Application
OE No.
Honda
5 HP
19210-881-003 / 19210-881-A01
Honda
5 HP BF50
19210-881-003 / 19210-881-A01
Honda
5 HP BF5A
19210-881-003 / 19210-881-A01
Honda
7.5 HP BF75
19210-881-003 / 19210-881-A01
Honda
8 HP
19210-881-003 / 19210-881-A01
Honda
10 HP BF100
19210-881-003 / 19210-881-A01
Suzuki
9.9/15 CV
17461-93902
2-50313 CEF O/B Impeller Force,Mariner,Mercury & Mercruiser
Make
Application
OE No.
Comes With Gasket
Force
90/120 HP - F5 150 HP - 5 Cyl (88>)
47-F694065 / 47-803631
y
Mariner
75 HP (4 Cyl) (6432901>)
47-65960 / 47-89984
y
Mariner
80 HP (4 Cyl) (4842729-6432900)
47-65960 / 47-89984
y
Mariner
85 HP (4 Cyl) (4731898-4842728) 2
47-65960 / 47-89984
y
Mariner
90 HP (6 Cyl) (5309951-)
47-65960 / 47-89984
y
Mariner
115 HP (6 Cyl) (4865178-)
47-65960...
Mac / Carver 70003 MC-100 HP Outboard Cover
Mercury 100 HP Cotton Universal-Fit Motor Cover (70003) by Carver®. Haze Gray Color, Cotton Material. Universal Motor Covers are a great option if you are upgrading your motor or simply need a replacement motor cover. Each motor cover has 1/4" draw rope sewn into the hem for easy installation and snug fit.
Do not use cover while motor is running
For Mercury 100 HP
Excellent Quality
Highest...
Genuine OEM Denso Honda 2/2.3hp Outboard Engine Spark Plug U14FSR-UB
Genuine Honda Outboard spark plug U14FSR-UB
HONDA - 98056-54757
Tech Data:
Thread Ø: 10mm
Thread Reach: 12.7mm
Hex Size:16.0mm
Heat Range: 14
Electrode Design: Non projected
Gap Configuration: U-groove in ground electrode
Resistor Built In: Yes
Compatible OE part: HONDA - 98056-54757
Compatible competitor part: NGK - CR4HSB