Lalizas Detachable Dinghy Seat Bag and Padded Seat
The under seat storage bag provides you with the extra storage space that is so necessary on any boat. It is made of PVC Tarpulin and has been designed to fit to any seat.
It also features a shoulder strap which allows you to carry the bag when you leave the boat. The top of the bag is padded to “soften the ride” on the wooden seat. It is water resistant, while the waterproof zipper...
Seago Tender Inflatable Boat Cover
The Seago tender cover provides invaluable extra protection for your inflatable tender.
Lined with a UV protective layer these semi-tailored covers with tight elastic trim and polyester strapping which snuggly fit to your tender.
To properly care for your inflatable this is a must have accessory as UV rays and heat are the biggest contributors to shortening the lifecycle of your tender.
Suitable...
Seago Detachable Dinghy Seat Bag and Padded Seat
Seago Inflatable Boat Seat Bag and Padded Seat Cover - Currently one only Soiled To Clear
The perfect accessory for your tender, adding comfort and storage. The padded seat cover is adjustable and fits all Seago inflatable boats and will also fit a large range of other brands too. The storage bag attaches with a strong zip and the water resistant storage area has a large opening. When you disembark...
Halkey Roberts Inflatable Boat/Kayak/SUP Replacement Valve
Halkey Roberts replacement valve suitable for all inflatable boats, kayaks and SUP's with this particular valve system.
Supplied as a 3 part system, inside, outside and valve cap.
Threaded assembly for easy installation
Sprung loaded centre valve pin for easy deflation
Following markings on the main body of the valve: HRC PAT. NO. 4.478.587 & 690NSBV
Hand pump ABS
Double action hand pump, takes the backache out of inflating fenders, tenders or SUP. Comes complete with hose and nozzle fittings.
Jabsco Rule iD20 Hi-Speed Dinghy Inflator/Deflator 12V
Jabsco Rule's High Speed Inflator / Deflator
ID20 is a 12V portable pump with multiple valve options and a high power motor (300W) that provides quick inflation and deflation for large inflatables.
The Rule High Speed Inflator/Deflator can inflate a typical 4-man dinghy in under 2 minutes (or a 10 ft x 6 ft x 22" family inflatable pool).
Adjustable nozzles are included for most inflatables...
Lalizas Double Action Stirrup Pump
Lalizas has designed the practical and highly effective Double Action Hand/Floor Pump ideal for inflating or deflating dinghies, ski tubes, air matresses plus many more inflatable products. To inflate or deflate simply fasten the air tube to the appropriate connection (“Inflate” or “Deflate”) and pump with steady up and down strokes.
The Pump also features an adjustable pressure...
Meridian Zero Rechargeable Air NRG 6000, 16psi HP Pump & Integral Battery
Set your chosen pressure on the digital, rechargeable Air NRG 6000 at up to 16psi and the pump will shut off at the right moment.
Charge by 12V DC (cigarette lighter socket) & 240V Mains
Maximum pressure 16psi
Battery 6000mAh Lithium Battery
Inflate at 350 litres/min low pressure falling to 70 litres/minute at high pressure.
Two USB spare resource outputs, 1Amp & 2Amp
Triple...
Scanstrut ATMOS 12V Brushless Integrated Airstation
ATMOS, by Scanstrut, will revolutionize your family’s boating experience. This beautifully designed, in-built air station is here to maximize quality time on the water.
At the push of a button, ATMOS is ready to inflate your paddleboards, towables and more: simply set the target pressure and let ATMOS do all the hard work.
Utilizing Scanstrut’s outdoor technology DNA, this is waterproof...
Sevylor Boston Replacement Valve
Boston Valve, replacement valve suitable for all inflatable boats, kayaks and SUP's with this particular valve system.
Supplied as a 2 part system with valve cap.
Threaded assembly for easy installation
22mm diameter thread
Waveline rechargeable air pump
Waveline air pump - designed for life on the go
Inflates up to 20 psi.
Sevylor 12v High Pressure Pump
A powerful 15psi electric pump for inflating Boats, Kayaks, SUP's and Airbeam Tents, this is a powerful 12V compressor type air pump which plugs in to a 12V cigarette/cigar type socket and features a digital display for easy selection of pressure. Once the pre-selected pressure is reached, the unit switches off automatically.
Pressure: 15 PSI / 1.000mBar
Airflow: 190 litres per minute
Pressure Unit...
Bravo BTP 12 (analogue) High Pressure Pump
This high pressure electric inflator/deflator pump features twin pumps which switch automatically at the appropriate pressure. A high volume/ low pressure turbine pump and a high pressure/low volume piston pump. Automatic pressure cut off is monitored and controlled by a rotating pressure gauge.
Dual 12V high pressure pump
1 bar, 14.5psi
Power by cigarette lighter socket or battery clamps
Turbine...
Bravo 4 Red Stirrup Pump
A double action stirrup type pump for inflating and deflating, a pump which will take the backache out of inflating dinghies, kayaks and fenders.
All plastic body construction with with aluminium handle, non kink hose and universal valve adaptors.
Volume: 2 x 2000cc
Inflates & Deflates
Non-kink hose
Body manufactured in ABS
Pressure cap adjusts for downward-only pumping
High-pressure...
Bravo 7 Foot Pump
Bravo 7 Foot Pump
Reinforced 5 litre foot pump suitable for inflatable boats, canoes, SUP's & airbeds.
Rugged foot pump suitable for synthetic fabric boats
All stainless steel parts
Maximum pressure 400mbar, 5.8psi,
28cm x 21cm x 6cm high
Supplied with hose and adaptors
Bravo 8 Foot Pump
Bravo 8 Foot Pump
A robust 6.5 litre foot pump suitable for small beach boats, kayaks, SUP's and air beds.Reinforced fabric coated bellows & all stainless steel metal parts.
Large capacity 6.5 litres
All stainless steel parts
Max pressure 300mbar 4.4psi
32cm x 23cm x 7cm high
Supplied with crush resistant hose and universal adaptors
Bravo GP10 Double Chamber Foot Pump
The Bravo GP10 Proffesional Double Chamber Foot
The GP10 can pump at high volume, low pressure then switch to low volume, high pressure by removing a small plug. The twin pump helps to reach higher pressures and to inflate to the required pressure with the least effort.
Suitable for all inflatable boats, SUP's and kayaks
Inflate and deflate
5.5 litres at up to 300mbar 5.5psi
1.6...
Insta-Lok Snap Davit Kit - Grey
Providing a safer option for entering or exciting an inflatable tender as well as practical storage, the Polymarine Insta-lock Snap Davit kit comprises of 2 spring loaded davit heads which secure to the Swim Platform and 2 Pads with lock-on-bars which are glued onto the Inflatable. When aligned the sprung loaded davit heads snap onto the lock-on-bar. The dinghy is firmly locked to the Host Craft ready...
Dinghy Launching Wheels
Inexpensive dinghy launching wheels can be easily attached to the transom of your tender so you will easily be able to wheel your tender anywhere over hard sand and paved surfaces. You will no longer risk damaging your tender by dragging it, or struggle to carry it!
The wheels are made from lightweight, robust ABS plastic which is resistant to outdoor elements, they will not rust, corrode or deteriorate...
Seago Dinghy Wheels Transom Quick Release Bracket
Dinghy Dolly Wheel Brackets
The best way to attach your dolly wheels to your boat.
The easy to fit bracket attaches to the transom and remains in place.
The dolly wheels simply slide into the bracket locking in place.
The Wheels can be removed anytime quickly by pressing the release button and sliding the wheels off.
Sold as a pair
Inflation Bayonet Adaptor For Dinghy Valves
Bayonet adaptor for inflatable boat and kayak valves.
This HP valve adaptor will fit most makes of inflatable dinghies Seago, Waveline, Plastimo, Wetline.
Pump Hose End With Conical Adaptors
Pump Hose End With Conical Adaptors
Hi Visibility Propeller Bag
Hi Visibility Propeller Bags
A real must have if you are towing and the outboard engine or outdrive is exposed.
Made of bright nylon with a draw string cord.
Towing without a prop bag warrants points on your licence
Sizes: ("W" = width across drawcord)
Small: W50cm x L50cm
Medium: W60cm x L65cm
Large: W75cm x L65cm
Extra Large: W90cm x L1000cm
Kayak Sit On Kayak Scupper Stoppers
Fit these plugs into your kayak scupper holes to prevent water from entering the kayak cockpit. Easy to remove if necessary using the attached pull cord.
Size: Small 1.25" - 1.5"
Colour: Yellow
Supplied as a pair with retaining cord
Ocean Kayak Small Scupper Stoppers
These scupper bungs are perfect for plugging off your scupper drain holes to give you the option to stay dry while paddling on flat water
Size: Small 1.25" - 1.5"
Colour: Yellow
Supplied as a pair with retaining cord
Polymarine Sealflex 500ml
Flexible water based acrylic latex sealant used internally for sealing porosity and minor leaks in Hypalon, PVC inflatables and similar fabrics.
Simple and effective to use. Inflate the tube or tubes to be repaired and then remove valve system allowing the tubes to deflate, pour in the Sealflex liquid, reinflate the tubes and allow it to coat the inside of the tubes by lifting and rotating the boat...
Polymarine PVC Emergency Boat Repair Kit
Repair kit for emergency repairs, which is supplied in hard waterproof container with tamper proof lid. A handy item to keep on board for repairs to PVC inflatble boats.
Contains
70ml tube of PVC adhesive,
35 x 15cm of PVC material and instructions.
PLEASE NOTE:- For a Permanent Repair, Polymarine 2 part Adhesive must be used.
Available in Grey, White, Black or Orange
Polymarine PVC Inflatable Boat Adhesive Single Part
Single part 70ml tube PVC Adhesive Solvent based polyurethene giving excellent adhesion to both plasticised and unplasticised PVC.
Will bond a variety of surfaces including wood, canvas, leather, PVC, nylon fabric, polyurethane fabric and foam.
Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex".
Used by liferaft service stations...
Polymarine PVC (3026) Inflatable Boat Adhesive 2-Part 250ml
PVC Adhesive 2 part 250ml tin with 10ml curing agent.
Solvent based polyurathene giving excellent adhesion to both plasticised and unplasticised PVC.
Will bond a variety of surfaces including wood, canvas, leather, PVC, nylon fabric, polyurathene fabric and foam.
Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex".
Used by liferaft...
Polymarine PVC (3026) 2 Part Adhesive - 1L Tin & 40ml cure
PVC Adhesive 2 part 1L Tin & 40ml curing agent.
Solvent based polyurathene giving excellent adhesion to both plasticised and unplasticised PVC.
Will bond a variety of surfaces including wood, canvas, leather, PVC, nylon fabric, polyurathene fabric and foam.
Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant...
Polymarine 2903 PVC/Hypalon – Primer and Cleaner
Polymarine 2903 Inflatable Boat Solvent Primer & Cleaner
For Priming and Cleaning both PVC and Hypalon Inflatable Boat Fabrics.
A primer to degrease and prepare surfaces before adhering
Use sparingly with a soft cloth, evaporates quickly
Suitable for reactivating applied adhesive
Contains Butanone (MEK)
Suitable for cleaning brushes
500ml can size
Polymarine Hypalon Inflatable Boat Adhesive Single Part
Single part 70ml tube Hypalon adhesive
Will bond natural rubber, polychloroprene, butyl, nitrile, hypalon and polyurathene rubber materials, rigid PVC, wood, leather and metal (metal should be primed with 2799 primer).
Not for use on plasticised PVC
Excellent resistance to heat, salt water and humidity.
Polymarine Hypalon Inflatable Boat Adhesive 2-Part
Hypalon Adhesive 2 part 250ml tin with 10ml curing agent.
Solvent based polyurethene giving excellent adhesion to both plasticised and unplasticised PVC.
Will bond a variety of surfaces including wood, canvas, leather, nylon fabric, polyurethene fabric and foam.
Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex".
Used by liferaft...
Polymarine Hypalon Emergency Boat Repair Kit
Repair kit for emergency repairs, which is supplied in hard waterproof container with tamper proof lid. A handy item to keep on board for repairs to Hypalon inflatble boats.
Contains
70ml tube of Hypalon adhesive,
35 x 15cm of Hypalon material,
abrasive paper and instructions.
Available in Grey, White, Orange or Black
PLEASE NOTE:- For a permanant repair 2 part adhesive must be used.
Polymarine Inflatable Boat Cleaner
An easy to use boat cleaner specifically formulated for use on inflatable boats.
Suitable for both PVC and Hypalon.
Removes dirt, white oxidation, grease, oil and petrol deposits.
Biodegradable.
500ml spray trigger bottle.
Polymarine Inflatable Boat Finish 250ML
Polymarine Inflatable Boat Finish
A finishing Product specifically for use on inflatable boats.
Suitable for both PVC and Hypalon fabrics.
Easy to apply with a soft cloth, no polishing required.
Dries to a pleasant sheen.
Helps to prevent resoiling.
Contains no sillicones or distillants.
Prevents fading and brightens colours.
Polymarine GRP Silicon Free Polish 250ml
Inflatable Boat GRP Polish
Wipe on Polish and wipe off.
Gently buffs and polishes to a brilliant shine without scratching.
Totally safe on all marine materials.
Supplied in 250ml flip top bottle
Polymarine Sureseal 12gm Tube
Flexible repair sealant and adhesive for a waterproof permanant repair to coated fabrics, PVC, PU, neoprene, rubber, leather, most plastics and fabrics.
Multiple uses including repairs to inflatable boat and RIB tubes, wet suits, dry suits, waders, boat fenders, tents and awnings, sails, diving and skiing equipment, foul weather gear, flotation vests, footwear, vinyl upholstery and thousands more items.
Creates...
Barton ClamSeal
The instant repair for all makes of Rib's, inflatables and liferafts.
The patented 'ClamSeal' is a compact safety device, which can be quickly inserted into any tear in a tube or fabric floor up to 90mm [3.5 inches].
Hand tighten the nut is all that is needed before reinflating the tube for an instant repair above or below the waterline.
Giving you ample time before a permanent repair can be carried...
FiberFix Flex Patch
FiberFix Flex is an impregnated, rubberised fibreglass patch for permanent repairs on both flat and hard-to-wrap-around surfaces. Simply apply the patch over the hole and expose to sunlight or UV light.
Flex patch will cure in 3-5 minutes.
Three patches 3"x 3", 2"x 8" & 5"x 5"
Properties
Watertight & airtight
Fits to any shape
Sticks to almost...