C.Quip
Grid
List
Stainless Steel Drinks Holder Double
Double Stainless Steel Drinks Holder
94mm ID (104mm OD). per section
Cast 316 stainless steel mug/drinks holders.
Stud mounted.
Teak Navigators Rack
Teak Navigators Rack
Keep all of you'r navigation items together with this stylish Teak storage unit
Size 475mm x 110mm x 150mm
Teak Folding Drinks Holder
Folding Drinks Holder
Space Saver Teak Folding Drinks Holder
Small (3051)
11.7 x 13 x 11cm.
Hole 7cm Dia
Teak Magazine Rack
Magazine Rack
Keep all you'r boating magazines to hand with this new style teak magazine rack
Rack Size: 265mm x 280mm x 110mm
C.Quip Adjustable Pantograph Wiper Arm 305-355mm
Adjustable parallel pantographic wiper arms constructed of stainless steel & brass (backed black) with a 7mm prong.
These wiper arms give a parallel sweep so that the wiper blade clears more of the screen giving a greater unobstructed view.
For heavy duty wiper motors with parallel splined shaft.
Heavy Duty Fixed parallel (Pantographic) Arms constructed of Stainless Steel & Brass....
C.Quip Adjustable Pantograph Wiper Arm 380mm - 432mm
Adjustable parallel pantographic wiper arms constructed of stainless steel & brass (backed black) with a 7mm prong.
These wiper arms give a parallel sweep so that the wiper blade clears more of the screen giving a greater unobstructed view.
For heavy duty wiper motors with parallel splined shaft.
For Motors with 16mm dia.
We strongly advise that if you have or are fitting...
C.Quip Adjustable Pantograph Wiper Arm 432mm - 558mm
Adjustable parallel pantographic wiper arms constructed of stainless steel & brass (backed black) with a 7mm prong.
These wiper arms give a parallel sweep so that the wiper blade clears more of the screen giving a greater unobstructed view.
For heavy duty wiper motors with parallel splined shaft.
We strongly advise that if you have or are fitting a Vetus wiper motor, fit Vetus wiper...
Light Duty Stainless Steel Adjustable Wiper Arm
Stainless steel adjustable windscreen wiper arms with 5mm prong, suitable for wiper motors with 9mm dia. shaft
Length: 190 - 280mm - Silver Finish
Length: 254 - 355mm - Silver Finish
We strongly advise that if you have or are fitting a Vetus wiper motor, fit Vetus wiper arms rather than combining Vetus and C-Quip products.
Heavy Duty Stainless Steel Wiper Arm
Heavy Duty Stainless Steel Adjustable Windscreen Wiper Arms.
7mm prong for wiper blade attachment
For wiper motors with 16mm dia. threaded shaft (13mm dia spline)
We strongly advise that if you have or are fitting a Vetus wiper motor, fit Vetus wiper arms rather than combining Vetus and C-Quip products.
C.Quip Heavy Duty Curved Wiper Blade
Discontinued product, please see this listing....
Marinco Deluxe SS Wiper Blade - CURVED
Black Sturdy Plastic Curved Blades with 7mm receptacle, to suit heavy duty wiper arm and motor.
Select length from drop-down menu.
Light Duty Std Wiper Motor
Light duty windscreen wiper motor, manufactured for boats in corrosion resistant materials.
Designed for frame mount
Shaft length 63mm - dia. 9mm
110º sweep
Switched live with self park facility
Arm & Blade sold separately
Plastic Skin Fitting with Stainless Steel Cap Straight Hose
Straight Skin Fittings moulded in fibre reinforced acetal with beautifully polished stainless steel cap that is ultrasonically welded onto the flange.
Light weight and highly corrosion resistant.
Threaded with back nut for securing
Attractive stainless steel cap
90° Plastic Skin Fitting with Stainless Steel Cap Hose
90º Skin Fittings moulded in fibre reinforced acetal with beautifully polished stainless steel cap that is ultrasonically welded onto the flange.
Light weight and highly corrosion resistant.
Threaded with back nut for securing
Attractive stainless steel cap
Plastic Mushroom Vent ** Due Feb 2024 **
Strong white plastic construction with screwed metal spindle
Internal Diameter: 103mm
Overall Diameter: 150mm
Height when closed: 37mm
Dimension between Interior and Exterior Flanges: 37mm
4 x Fixing holes
41mm Stainless Steel Midget Shell Vent
41mm Stainless Steel Midget Shell Vent
L41mm x W41mm x H16mm
57mm Stainless Steel Midget Shell Vent
57mm Stainless Steel Midget Shell Vent
L57mm x W54mm x H16mm
140mm Stainless Steel Clam Shell Vent
140mm Stainless Steel Shell Vent
Length 140mm - Width 115mm - Height 52mm
Dimensions are inclusive of flange and fixings required.
170mm Stainless Steel Clam Shell Vent
170mm Stainless Steel Shell Vent
Length 170mm - Width 148mm - Height 57mm
Dimensions are inclusive of flange and fixings required.
190mm Stainless Steel Shell Vent
190mm Stainless Steel Clam Shell Vent
Size: L 190mm x W 170mm x H 72mm
Dimensions are inclusive of flange and fixings required.
Stainless Steel Louvered Vent 128x66mm
Stainless Steel Louvered Vent
Width: 128mmHeight: 66mm
Stainless Steel Louvered Vent 128x116mm
Stainless Steel Louvered Vent
Width: 128mmHeight: 116mm
Stainless Steel Louvered Vent 232x118mm
Stainless Steel Louvered Vent
Width: 232mm
Height: 118mm
Stainless Steel Louvered Vent 128 x 232mm
Stainless Steel Louvered Vent
Width: 127mm
Height: 232mm
Stainless Steel Round Butterfly Vent 102mm
Stainless Steel Butterfly Vent 102mm diameter with Centre knob.
Stainless Steel Round Butterfly Vent 127mm
Stainless Steel Butterfly Vent 127mm diameter with Centre knob.
Stainless Steel Narrow Slotted Louvre Vent
Polished Stainless Steel Slotted Louvre Vent for engine room ventilation.
This version has vent slots which extend approx 12mm beyond mounting flange.
6 Slot: Flange 330mm x 78mm - Cut Out 305mm x 54mm
8 Slot: Flange 430mm x 78mm - Cut Out 405mm x 54mm
Stainless Steel 5 Slot Wide Slotted Louvre Vent
Polished Stainless Steel Slotted Louvre Vent for engine room ventilation:
5 Slot: Flange 326mm x 114mm - Cut Out 304mm x 90mm
Plastic Flush Louvre Vent
ABS Plastic Louvred Vent
88mm x 88mm overall
Flush Fitting
Suitable for bilge blowers and onboard ventilation.
73mm Plastic Hose Vent
ABS Plastic Hose Vent
90mm x 90mm overall
73mm Ø hose spigot
Suitable for bilge blowers and onboard ventilation.
100mm Plastic Hose Vent
ABS Plastic Hose Vent
125mm x 125mm Overall
100mmØ hose spigot
Suitable for bilge blowers and onboard ventilation
ABS Plastic Louvre Vent 201x101mm
ABS Louvered Vent
201 x 101mm
White
Non Return Valve 1/2', 3/4', 1' Sections
In-Line Non Return Valve
Made from sturdy polypropylene, a built in rubber flap allows water to flow in one direction only.
Each section can be cut down to the size of the hose barb required.
1/2', 3/4', 1' sections.
O/A length 170mm
C-Quip Non Return Valve 1', 1 1/4', 1 1/2' Sections
C-Quip Non Return Valve
Made from sturdy polypropylene, a built in rubber flap allows water to flow in one direction only.
Each section can be cut down to the size of the hose barb required.
1', 1-1/4', 1-1/2' sections.
258mm long
Aqualine Stainless Steel Courtesy Lights
Aqualine Courtesy Lights
Stylish 316 Stainless Steel 'downward pointing' Courtesy Light with bright LED for illuminating boat steps and cockpit areas. Apart from enhancing the style and cosmetic appearance of the boat these bright LED's also offer safety for crew members when walking the decks.
Single 1w Bright LED
9 - 28v DC
IP67
Available in Blue LED and Bright White...
C-Quip Tilly II 180 LED Courtesy Light
The Tilly II 'Eclipse' Courtesy Light is a quality LED designed to illuminate 180 degrees without blinding by using a polished stainless steel cover.
Snap mounting is made easy on GRP or timber but the unit also comes with a screw-in fixing ring for use on carpeted surfaces where sealant cannot easily be used.
9 - 28v DC
IP67
Available in Blue or White
38mm Dia.OA
19mm Depth (26mm OA)
25.4mm (1')...
C-Quip ALIOTH LED Courtesy Lights
Alioth LED Courtesy Light
Clear lens with single Blue or White Super LED
Easy to mount and no driver required.
316 Stainless Steel
1watt,12v
IP65
Dims: O/A 40mm dia., Cut Out 25mm, Depth 18mm
12v Stainless Steel Cabin Light 140mm
140mm Stainless Steel Switched Cabin Light
Polished stainless steel cabin light with integral toggle switch and patterned diffuser.
Supplied with 12v 10w bulb
Base Dia: 140mm
Lens dia. 95mm
12v Stainless Steel Cabin Light 171mm
171mm Stainless Steel Switched Cabin Light
Polished stainless steel cabin light with integral toggle switch and patterned diffuser.
Supplied with 12v 15w bulb
Base Dia:171mm
Lens dia. 127mm
12v Brass Cabin Light 140mm
140mm Brass Switched Cabin Light
Polished brass cabin light with integral stainless steel toggle switch and patterned diffuser.
Base Dia: 140mm
Lens Dia 93mm
Supplied with 12v 15w bulb
LED Recess Mount Ceiling Lights 12v - Chrome Bezel
These waterproof LED recess mount ceiling lights are all plastic in construction and come with an LED assembly comprising of 8 light super cluster. Suitable for internal/external and flybridge installations.
Interior or exterior use
Choice of white or red LED
Lens dia. 50mm
Cutout dia. 58mm
Overall dia. 80mm
BA15D 12v LED Bulb
LED Replacement Bulbs
These 5 LED replacement bulbs are designed to fit into a standard incandescent bayonet fitting and will save a HUGE amount of onboard power consumption.
Available in Red & White. NOT suitable for navigation lights.
BA9 Halogen Bulb 12v 20 Watt
BA9 20w Halogen bulb to suit 25 series deck/masthead combi light.
12v dc
20w
BA9
Chrome Side Mount Single Lever Engine Control
Chrome side mount single lever engine control, compatible with most 33C type engine control cable including Ultraflex & Teleflex Morse systems.
Designed for single cable gear or throttle operation.
Multiple uses for marine and industrial
Select suitable length control cable
Cable will require additional mounting fittings and cable end fittings
This control has no neutral lock-in position
...
Chrome Side Mount Twin Lever Engine Control
Attractive and functional chrome side mount engine control lever for gear and throttle to suit inboard and outboard engines.
The control is supplied with a mounting plate which is hidden behind the console and also accomodates the installation of the engine control cables.
The control lever is compatible with Ultaflex & Teleflex Morse 33c type control cable systems, supplied separately.
This...
Tank Breather Vent - 90 Deg 12mm
Through Hull 90º Tank Vent
Gauze Barrier
Through Hull 19mm
Tail 12mm
Digital Battery Test Switch Panel
LED Display. Measurable Voltage – 3v to 30v
Connects to two battery banks with selector switch for the display.
IP65
75.2mm wide
62.5mm high
53.5mm deep…
Toggle Switch 2 Position (on-off)
Thermo Plastic Toggle Switch 12v DC - Without Illumination
2 Position (on-off) dash mount toggle switch
15A 12v - 10A 24v
Toggle Switch 3 position
3 Position dash mount Toggle Switch On/Off/On
Max panel thickness 5mm
Mounting Aperture 12mm
