Best Selling

Hose end adaptors for Bravo BP/BTP Electric pumps Hose has a 21mm ID Hose length is 1.70m

Bravo Inflate Adaptor 21mmBayonet type Bravo Inflate adaptor 21mm as used on the following Bravo pumps:Bravo GE 20-1Bravo GE 21Bravo BST 800Bravo BST 800 BATTFits valves: 500119 & 500132 (Zodiac Semi Recessed), 500126 ( Bravo 2005), 500128 ( Waveline XS Eco), 500129 (Quicksilver/Waveline 8 section), & 809887 ( Halkey Roberts) Supplied with three washers, these are easily removeable to allow different depth settings for different valves.Manufactured by Bravo

Bravo Turbo Max inc Console Kit 24V consists of: Turbo Max Air Station Console Mount Inflator 24V inc DC Driver It is a large capacity 24V inflator which can inflate a 7M Rib in approx 7 minutes and has a capacity of 1000L/min max pressure is 3.6psi. Pressure can be regulated up to 3.6psi with automatic shut off, equipped with two powerful motors mounted on an aluminium plate to disperse heat. Screws Bracket Inflation Adaptors Power Cable 0.5M long with a 100 Amp Connector Hose is not included, so Turbo Max Console Kit Hose Fittings is required part nos 502244 ( this come with all connectors 2.8M hose), if just a longer length of hose is required order part nos 502236 which is sold by the metre, also available waterproof deck mounted hatch locker with clear hatch part nos 502242 ( so inflator can be installed inside to protect from spray dirt) Click on related products below to view Hose Fittings, Hose, Watertight Box,Inflate Aadaptors( will require hose to be cut to fit hose reducer)

Gudi patented and RINA approved non-stick valve with position indicator. The double intake function allows the emptying of bilge water via the engine cooling circuit in an emergency. Made from premium quality corrosion resistant bronze and maintenance free internal mechanism due to protective neoprene coating. Polyamide 6 reinforced nylon handwheel with operating lever for ease of use. Compliant with...

29 mm Wire Through-Deck Bullet Small Boat Classic Block — Stainless Steel Cover

C7 & D7 Repair KitAvon part nos V01937

C7, D7 & A6 Valve SpannerFits inflation valves 500116 & 500117 (C7), 500134-37 (D7), & relief valves 501140-45 (A6)

Extremely versatile hatch mounted 12v intake/exhaust fan. With a pivoting axis, this versatile fan can be swivelled to exhaust air out of the cabin or to bring fresh air in, Taku fits to the underside of the hatch with suction cup mounts and can be put up or taken down in seconds. LED Cabin light 3 speed Comfort mode (100, 200, 300 CFM) and powerful AirBlast Exchange mode for over 500 cubic...

Aero Base with CL203 Black Nylon Junior

Aero Base with CL263 Black Nylon Micros

Aero Base with CL272 Black Nylon MK2 Junior

Aero Base with Hard Anodised CL211 MK1AN Racing Junior

Aero Base with Hard Anodised CL211 MK2AN Racing Junior

Aero Base with Hard Anodised CL217 MK1AN Side-Entry Racing Junior (Starboard)

Aero Base with Hard Anodised CL217 MK2AN Side-Entry Racing Junior (Starboard)

Aero Base with Hard Anodised CL218 MK1AN Side-Entry Racing Junior (Port)

Aero Base with Hard Anodised CL236AN Roller Fairlead MK1 Racing Junior

Aero Base with Hard Anodised CL268AN Racing Micros

Aero Base with Hard Anodised CL270AN Racing Micros with Becket

Aero Base with Hard Anodised CL277AN Side-Entry Racing Micros (Starboard)

Aero Base with Silver CL211 MK1 Racing Junior

Aero Base with Silver CL211 MK2 Racing Junior

Aero Base with Silver CL217 MK1 Side-Entry Racing Junior (Starboard)

Aero Base with Silver CL217 MK2 Side-Entry Racing Junior (Starboard)