ECS 9" Ventilite Shut Off Vent c/w S/S Cover
ECS 9" Ventilite Shut Off Clear Roof Vent c/w Stainless Cover
This is one of the original ventilation systems specifically designed for marine use and is still one of the best. It is a proven reliable product; with thousands of units installed on both commercial and pleasure craft throughout the world in the last four decades.
Ventilite Static Ventilators
Attractive ventilator with low...
ECS 9" Ventair White Roof Vent with Stainless Cover
ECS 9" Ventilite Clear Roof Vent c/w Stainless Steel Cover
This is one of the original ventilation systems specifically designed for marine use and is still one of the best. It is a proven reliable product; with thousands of units installed on both commercial and pleasure craft throughout the world in the last four decades.
Ventair & Ventilite Static Ventilators
Attractive ventilator...
140mm OA Chrome Internal Grill
Solid Chrome ring with silver coloured anodised aluminium grill/mesh.OD: 140mmGrill dia.: 106mmN-73016 - Chrome (Silver Grill)
Nicro Solar Minivet 1000 3' Fan White (7' OD)
The Marinco MiniVent 1000 is the smallest and most economical solar vent in the Nicro line. At just 7" in diameter and approximately 1-3/4" high, the MiniVent 1000 is compact yet effective.
The solar powered model is an exhaust vent only, but it will keep the boat cabin cool when you need it most - during the hot sunlight hours.
Under solar power the MiniVent 1000 will move 700 cubic feet of air per...
Plastic Mushroom Vent ** Due Feb 2024 **
Strong white plastic construction with screwed metal spindle
Internal Diameter: 103mm
Overall Diameter: 150mm
Height when closed: 37mm
Dimension between Interior and Exterior Flanges: 37mm
4 x Fixing holes
Vetus Dartagnan Stainless Steel Mushroom Vent
Vetus Dartagnan Mushroom Deck Ventilator.
Hugely popular range of deck vents made using AISI316 Stainless, polished to a high-gloss finish. These vents will provide excellent ventilation, with the added security of a built-in dorade with mosquito screen.
Can be closed tight during adverse weather or deck washing.
Supplied with white plastic interior counter flange.
A/O Diameter: 185mm
...
Vetus Athos Stainless Steel Mushroom Vent
Vetus Athos Mushroom Deck Ventilator.
Hugely popular range of deck vents made using AISI316 Stainless, polished to a high-gloss finish. These vents will provide excellent ventilation, with the added security of a built-in dorade with mosquito screen.
Can be closed tight during adverse weather or deck washing.
Supplied with white plastic interior counter flange.
A/O Diameter: 152mm
Cut...
Vetus Portos Stainless Steel Mushroom Vent
Vetus Portos1 Mushroom Deck Ventilator.
Hugely Popular range of deck vents made using AISI316 Stainless, polished to a high-gloss finish. These vents will provide excellent ventilation, with the added security of a built-in dorade with mosquito screen.
Can be closed tight during adverse weather or deck washing and supplied with white plastic interior counter flange.
O/A Diameter: 117mm
Cut...
Vetus UFO Stainless Deck Ventilator
Vetus type UFO is a stylish ventilator with polish stainless steel cover providing ventilation to cabins and heads compartments helping reduce or prevent condensation and humidity.
Stainless steel polished cover
Plastic headlining trim ring, deck flange and mosquito screen
Overall size 200mm:
30mm above deck
Free flow 31.8 cm2
Vetus UFO2 Closeable Stainless Steel Deck Ventilator
Vetus type UFO2 is a stylish ventilator with polish stainless steel cover, providing ventilation to cabins and heads compartments helping reduce or prevent condensation and humidity.
Stainless steel polished cover
Plastic headlining trim ring, deck flange and mosquito screen
Overall size 200mm:
30mm above deck
Free flow 31.8 cm2
Vetus UFO2 deck vents can also be used in conjunction...
Vetus UFOTR Deck Ventilator
Vetus type UFO is a stylish ventilator with polish stainless steel cover, with a translucent centre to allow light through providing ventilation to cabins and heads compartments helping reduce or prevent condensation and humidity.
Stainless steel polished cover
Plastic headlining trim ring, deck flange and mosquito screen
Overall size 200mm:
30mm above deck
Free flow 31.8 cm2
Vetus...
Vetus FAN Electric Cabin Ventilator 130mm
Vetus electric ventilator fans are designed for ceiling or wall mount in all areas of marine ventilation, such as saloons, cabins, heads and galleys.
The vent fan is very quiet, as the motor does not use carbon brushes, making the vent suitable for night running.
Vetus FAN12/24 also boasts a very low level of energy consumption.
The fan motor is a long life computer motor which can run at two different...
Seaflo 75mm (3") In Line Blower
In-line bilge blower with 75mm hose connection for extracting fumes and providing essential ventilation for engine compartments, galleys, bilges, and heads.
Mounting feet allow vertical or horizontal installation in confined spaces and supplied with 16-gauge, tinned and caulked copper wire leads.
Improved design includes:
Very low current draw
5 blade fan for super efficiency
Sealed...
Seaflo 100mm (4") In Line Blower
In-line bilge blower with 75mm hose connection for extracting fumes and providing essential ventilation for engine compartments, galleys, bilges, and heads.
Mounting feet allow vertical or horizontal installation in confined spaces and supplied with 16-gauge, tinned and caulked copper wire leads.
Improved design includes:
Very low current draw
5 blade fan for super efficiency
Sealed...
Flexible Air Ducting 75mm
Lightweight flexible PVC ducting hose encapsulating a spring helix suitable for bilge blowers and all non heated ventilation systems.
Temperature range 10°C to + 60°C. .
Size: 75mm ID
Colour: May vary
Price per Mtr - Supplied as a single length based on the number of meters ordered
Brass Ventilator Cover
Attractive polished brass ventliator cover.
L175mm x W120mm
2 x Threaded fixing Studs included
image of chrome NLA - only 1 x brass available
41mm Stainless Steel Midget Shell Vent
41mm Stainless Steel Midget Shell Vent
L41mm x W41mm x H16mm
57mm Stainless Steel Midget Shell Vent
57mm Stainless Steel Midget Shell Vent
L57mm x W54mm x H16mm
140mm Stainless Steel Clam Shell Vent
140mm Stainless Steel Shell Vent
Length 140mm - Width 115mm - Height 52mm
Dimensions are inclusive of flange and fixings required.
170mm Stainless Steel Clam Shell Vent
170mm Stainless Steel Shell Vent
Length 170mm - Width 148mm - Height 57mm
Dimensions are inclusive of flange and fixings required.
190mm Stainless Steel Shell Vent
190mm Stainless Steel Clam Shell Vent
Size: L 190mm x W 170mm x H 72mm
Dimensions are inclusive of flange and fixings required.
Stainless Steel Louvered Vent 128x66mm
Stainless Steel Louvered Vent
Width: 128mmHeight: 66mm
Stainless Steel Louvered Vent 128x116mm
Stainless Steel Louvered Vent
Width: 128mmHeight: 116mm
Stainless Steel Louvered Vent 232x118mm
Stainless Steel Louvered Vent
Width: 232mm
Height: 118mm
Stainless Steel Louvered Vent 128 x 232mm
Stainless Steel Louvered Vent
Width: 127mm
Height: 232mm
Stainless Steel Round Louvre Vent
Stainless steel round louvre vent
102mm dia
127mm dia
4 x fixings (not included)
Stainless Steel Round Butterfly Vent 102mm
Stainless Steel Butterfly Vent 102mm diameter with Centre knob.
Stainless Steel Round Butterfly Vent 127mm
Stainless Steel Butterfly Vent 127mm diameter with Centre knob.
Stainless Steel Narrow Slotted Louvre Vent
Polished Stainless Steel Slotted Louvre Vent for engine room ventilation.
This version has vent slots which extend approx 12mm beyond mounting flange.
6 Slot: Flange 330mm x 78mm - Cut Out 305mm x 54mm
8 Slot: Flange 430mm x 78mm - Cut Out 405mm x 54mm
Stainless Steel 5 Slot Wide Slotted Louvre Vent
Polished Stainless Steel Slotted Louvre Vent for engine room ventilation:
5 Slot: Flange 326mm x 114mm - Cut Out 304mm x 90mm
ABS 305mmx83mm White Slotted Vent
White Slotted Louvre Vent
Cut Out 305 x 83mm
O/A 336mm x 122mm
5 Slot
Plastic Flush Louvre Vent
ABS Plastic Louvred Vent
88mm x 88mm overall
Flush Fitting
Suitable for bilge blowers and onboard ventilation.
73mm Plastic Hose Vent
ABS Plastic Hose Vent
90mm x 90mm overall
73mm Ø hose spigot
Suitable for bilge blowers and onboard ventilation.
100mm Plastic Hose Vent
ABS Plastic Hose Vent
125mm x 125mm Overall
100mmØ hose spigot
Suitable for bilge blowers and onboard ventilation
ABS Plastic Louvre Vent 201x101mm
ABS Louvered Vent
201 x 101mm
White
Plain Slotted Ventilator 220 x 150 mm Polished Chrome
E C Smiths Polished Chrome Plain Slotted Ventilator
Brass Hit & Miss Vent 220 x 150 mm
Strong 16 gauge sheet metal is used to manufacture metal vents
Spare Cowl Alone for Plastimo Vents-For 16922
Width o/a 170mm
Cut 75mm
Airflow 60mm
PLASTIMO REPLACEMENT VENT BLUE FOR P16922
3/4 shape bumper dock fender - Ø 25 x 90 cm
The Bumper is a really efficient fender, to be fixed on the pontoon; according to its location, it provides efficient protection to the bow and amidships.
Suitable for all pontoon or cartway shapes: square or round-end pontoon.
Sturdy construction, from rotomoulded PVC, UV-ray protected.
Registered design.
Max. pressure: 0.10 bar / 1.45 psi
Angle Dock Fender
Fastening with 8 x Ø 7 mm screws (not included).
Dimensions:
335 mm large. leg
155 mm short leg
120 mm height
72 mm width
Unfolded: 490 x 120 x 72 mm
Articulated Bumper 18x80cm
ARTICULATED BLUE DOCK FENDER/BUMPER STD 3/4 18 X 80cm
Whether you sail shorthanded or singlehanded, whether you are a beginner or a confirmed skippper, the Bumper will take away some "emotional" moments when approaching the pontoon, in particular when the wind blows hard and currents are unkind!
The Bumper is a really efficient fender, to be fixed on the pontoon; according to its location,...
Bumper 3/4-Standard - Ø18 x 40cm
The Bumper is a really efficient fender, to be fixed on the pontoon; according to its location, it provides efficient protection to the bow and amidships.
Suitable for all pontoon or cartway shapes: square or round-end pontoon.
Sturdy construction, from rotomoulded PVC, UV-ray protected.
Registered design.
Max. pressure: 0.10 bar / 1.45 psi
Ocean Dock Pontoon Fender Air Filled
The Ocean inflatable Dock fender is the most convenient solution when it comes to bumpers, providing exceptional dock and boat protection. It is the ideal fender for dock fending, fitting perfectly in every dock with easy and safe installation.
Available in 3/4 or 1/2
Length 640mm
Height 220mm
Fortress FX Series Lightweight Anchor
Fortress anchors are constructed using a high-tensile, corrosion-resistant, aluminium magnesium alloy that is precision- machined into interlocking components with no welds to weaken the metal. This results in a lighter, easy to handle anchor with superior holding power. The anchors have been designed to be easily disassembled for compact storage, or as a spare and/or a storm anchor.
All Fortress®...
Galvanised Delta Type Self Launching Anchor 6kg
Available in a range of sizes to suit most vessels, this Delta Type galvanised anchor provides excellent holding power in most types of sea or river bed. The shank profile and ballasted tip make it self-launching, and its low centre of gravity and self-righting geometry ensure that it will set immediately.
Weight: 6kg
Recommended Boat Size: 7.5mtr
Dimensions: O/A Length 580mm x W248mm
Galvanised Delta Type Self Launching Anchor 8kg
Available in a range of sizes to suit most vessels, this Delta Type galvanised anchor provides excellent holding power in most types of sea or river bed. The shank profile and ballasted tip make it self-launching, and its low centre of gravity and self-righting geometry ensure that it will set immediately.
Weight: 8kg
Recommended Boat Size: 9.15mtr
Dimensions: O/A Length 644mm x W270mm
Galvanised Delta Type Self Launching Anchor 10kg
Available in a range of sizes to suit most vessels, this Delta Type galvanised anchor provides excellent holding power in most types of sea or river bed. The shank profile and ballasted tip make it self-launching, and its low centre of gravity and self-righting geometry ensure that it will set immediately.
Weight: 10kg
Recommended Boat Size: 11mtr
Dimensions: O/A Length 680mm x W275mm
Galvanised Delta Type Self Launching Anchor 15kg
Available in a range of sizes to suit most vessels, this Delta Type galvanised anchor provides excellent holding power in most types of sea or river bed. The shank profile and ballasted tip make it self-launching, and its low centre of gravity and self-righting geometry ensure that it will set immediately.
Weight: 15kg
Recommended Boat Size: 12.20mtr
Dimensions: O/A Length 790mm x W362mm
Galvanised Delta Type Self Launching Anchor 20kg
Available in a range of sizes to suit most vessels, this Delta Type galvanised anchor provides excellent holding power in most types of sea or river bed. The shank profile and ballasted tip make it self-launching, and its low centre of gravity and self-righting geometry ensure that it will set immediately.
Weight: 20kg
Recommended Boat Size: 15.25mtr
Dimensions: O/A Length 870mm x W385mm