Grid
List
Victron Quattro 12/3000/120-50/50 230/50
Features includes Parallel and 3-phase operation, remote monitoring and system integration, PowerControl , PowerAssist , Integrated Transfer switch and battery temperature sensor. Input voltage range: 9.5 - 17V DC. Output voltage: 120 VAC ± 2% / Frequency: 50 Hz ± 0,1%. Cont. output power at 25 °C: 3000 VA. Cont. output power at 25 °C / 40 °C: 2500 W / 2200 W. Peak power: 6000 W. Zero-load power in Standard / AES mode / Search mode: 15 W / 10 W / 5 W. AC inputs (2x): Input voltage range: Input voltage range: 90-140 VAC / Input frequency: 45 – 65 Hz / Power factor: 1 . Protection: output short circuit, overload, battery voltage too high/too low, temperature too high, 230 VAC on inverter output, input voltage ripple too high.
Victron Quattro 12/5000/220-100/100
Features includes Parallel and 3-phase operation, remote monitoring and system integration, PowerControl , PowerAssist , Integrated Transfer switch and battery temperature sensor. Input voltage range: 9.5 - 17V DC. Output voltage: 230 VAC ± 2% / Frequency: 50 Hz ± 0,1%. Cont. output power at 25 °C: 5000 VA. Cont. output power at 25 °C / 40 °C: 4500 W / 4000 W. Peak power: 10000 W. Zero-load power in Standard / AES mode / Search mode: 25 W / 20 W / 5 W. AC inputs (2x): Input voltage range: 187-265 VAC / Input frequency: 45 – 65 Hz / Power factor: 1. Charge voltage 'absorption' / 'float': 14,4 V DC / 13.8 V DC. Protection: output short circuit, overload, battery voltage too high/too low, temperature too high, 230 VAC on inverter output, input voltage ripple too high.
Victron Quattro 24/3000/70-50/50 230/50
Features includes Parallel and 3-phase operation, remote monitoring and system integration, PowerControl , PowerAssist , Integrated Transfer switch and battery temperature sensor. Input voltage range: 19 - 33V DC. Output voltage: 230 VAC ± 2% / Frequency: 50 Hz ± 0,1%. Cont. output power at 25 °C: 3000 VA. Cont. output power at 25 °C / 40 °C: 2500 W / 2200 W. Peak power: 6000 W. Zero-load power in Standard / AES mode / Search mode: 15 W / 10 W / 5 W. AC inputs (2x): Input voltage range: 187-265 VAC / Input frequency: 45 – 65 Hz / Power factor: 1. Charge voltage 'absorption' / 'float': 28.8 V DC / 27.6 V DC. Protection: output short circuit, overload, battery voltage too high/too low, temperature too high, 230 VAC on inverter output, input voltage ripple too high.
Victron Quattro 24/8000/200-100/100
Features includes Parallel and 3-phase operation, remote monitoring and system integration, PowerControl , PowerAssist , Integrated Transfer switch and battery temperature sensor. Input voltage range: 19 - 33V DC. Output voltage: 230 VAC ± 2% / Frequency: 50 Hz ± 0,1%. Cont. output power at 25 °C: 8000 VA. Cont. output power at 25 °C / 40 °C: 7000 W / 6300 W. Peak power: 16000 W. Zero-load power in Standard / AES mode / Search mode: 30 W / 25 W / 8 W. AC inputs (2x): Input voltage range: 187-265 VAC / Input frequency: 45 – 65 Hz / Power factor: 1. Charge voltage 'absorption' / 'float': 28.8 V DC / 27.6 V DC. Protection: output short circuit, overload, battery voltage too high/too low, temperature too high, 230 VAC on inverter output, input voltage ripple too high.
Victron Quattro 48/15000/200-100/100 230V VE.Bus
The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
Victron REC030001210 Phoenix Inverter Control
This panel is intended for Phoenix Inverters equipped with a UTP remote monitoring and control socket. It can also be used on a MultiPlus Inverter/Charger when an automatic transfer switch but no charger function is desired. The brightness of the LEDs is automatically reduced during night time. Note: Only for models: 12/1200, 12/1600, 12/2000, 12/3000, 12/5000, 24/1200, 24/1600, 24/2000, 24/3000, 24/5000, 48/3000 and 48/5000.
Victron REL300100000 Single Phase Energy Meter ET112 - Max 100A
The ET112 Energy Meter is typically used in an Energy Storage System to measure the power and energy of the whole application at the distribution box, Or to measure the output of a PV Inverter, to display the data on the Color Control GX and the VRM Portal.
Victron RJ45 UTP Cable 0.3 m
Victron energy UTP Patch Lead 0.3m.
Victron RJ45 UTP Cable 0.9 m
Victron energy UTP Patch Lead 0.9m.
Victron RJ45 UTP Cable 1.8 m
Victron energy UTP Patch Lead 1.8m.
Victron RJ45 UTP Cable 30 m
Victron energy UTP Patch Lead 30m.
Victron RJ45 UTP network cable 10m
Victron energy UTP Patch Lead 10m.
Victron RJ45 UTP network cable 15m
Victron energy UTP Patch Lead 15m.
Victron RJ45 UTP network cable 20m
Victron energy UTP Patch Lead 20m.
Victron RJ45 UTP network cable 3m
Victron energy UTP Patch Lead 3m.
Victron RJ45 UTP network cable 5m
Victron energy UTP Patch Lead 5m.
Victron Shore Power Cord 16A / 250VAC - 15m
CE certified shore power cable with moulded 3 pin plug and connector. Features a power indication LED and protective cap on female connector for additional safety.
Victron Shore Power Cord 16A / 250VAC - 25m
CE certified shore power cable with moulded 3 pin plug and connector. Features a power indication LED and protective cap on female connector for additional safety.
Victron SHP306002500 250VAC 32 Amp Shore Power Cord - 25M
Victron Shore Power Cord, 32 Amp / 250Vac. 25 Metres.
Victron SHU102050200 Shunt 1000A / 50mV -0.5
Heavy duty shunt for measuring current up to 1000 Amps. This shunt can be used with any of the Victron BMV meters to increase the current range to 1000 Amps.
Victron Shunt 500A/50mV
Shunt 500A/50mV
Victron Skylla Control
The Skylla Control allows you to alter the charge current and see the system status.
Victron Skylla-i Control GX (Right Angle RJ45)
The Skylla-i Control allows you to alter the charge current and see the system status.
Victron Skylla-l 24v/100a (3)
A modern and powerful battery charger that withstands the rigors of an adverse environment: heat, humidity and salt air. The right amount of charge for a lead-acid battery: variable absorption time BatterySafe mode: preventing damage due to excessive gassing Storage mode: less maintenance and aging when the battery is not in use Smaller and lighter compared to similar models NMEA2000 Canbus connection PowerControl: set a maximum shore power Remote Control Li-ion (LiFePo4) ready
Victron Skylla-TG 24/30 (1+1)
Features include: Temperature sensor, use as a power supply, forced cooling. Charge voltage 'absorption' / 'float': 28.5 V DC / 26.5 V DC. Battery capacity: 150-500 Ah. Protection: IP21 / Output short circuit, battery reverse polarity detection, battery voltage too high, temperature too high. Charge current starter batt. / house batt.: 4 A / 30 A. Charge characteristic: IUoUo (three step). Remote alarm: Potential free contacts 60V / 1A (1x NO and 1x NC). Operating temp. range / Humidity (non condensing): -20 to 60°C / max 95%.
Victron Skylla-TG 24/30 GMDSS 120-240V
Features include: Temperature sensor, use as a power supply, forced cooling. Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN(long-range wide area network) device, available optionally. The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery. Charge voltage 'absorption' / 'float': 28.5 V DC / 26.5 V DC. Charge current: 30 A. Charge characteristic: IUoUo (three step). Protection: output short circuit, battery reverse polarity detection, battery voltage too high, temperature too high. Operating temp. range -20 to 60°C (0 - 140°F). Humidity (non condensing) max 95%. Protection category IP 21.
Victron Skylla-TG 24/50 (1+1)
The Skylla-TG battery charger is a fully automatic charger for 24V batteries and accepts any mains supply that delivers 90-265 V AC, with frequencies ranging from 45 to 65 Hz. The Skylla-TG also accepts DC supply, ranging from 90 up to 400 V DC. It charges the battery according to the IUoUo characteristic, which is a 3-stage charging characteristic. While charging, the Skylla-TG charger continuously measures the battery voltage and current and recalculates the charging voltage and current based on the measured values.
Victron Skylla-TG 24/50 (1+1) 120-240V
Features include: Temperature sensor, use as a power supply, forced cooling. Input voltage / input voltage range: 230 V AC / 90 - 265 V AC. Frequency: 45-65 Hz / Power factor: 1. Charge voltage 'absorption' / 'float': 28.5 V DC / 26.5 V DC. Battery capacity: 250-500 Ah. Protection: IP21 / Output short circuit, battery reverse polarity detection, battery voltage too high, temperature too high. Charge current starter batt. / house batt.: 4 A / 50 A. Charge characteristic: IUoUo (three step). Remote alarm: Potential free contacts 60V / 1A (1x NO and 1x NC). Operating temp. range / Humidity (non condensing): -20 to 60°C / max 95%.
Victron Skylla-TG 24v/30a(90-265vac)
Dimensions (mm) 14.4 x 9.9 x 5.8. Voltage 24V. Weight (kgs) 12.1. IP Rating IP21.
Victron Smart BMS CL 12/100
The Smart BMS CL 12/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator. The BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery voltage, high battery voltage or over temperature.
Victron SmartShunt 1000A / 50mV
The SmartShunt 1000A is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Victron SmartShunt 2000A/50mV
The SmartShunt is an all in one battery monitor, only without a display. A compatible smart phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on the phone (or tablet) and can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Victron SmartShunt 500A / 50mV
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Victron SPR00053 PCBA for shunt BMV 602S / 702
Replacement PCB for 500 Amp shunt on BMV 702 / 712 Battery Monitors.
Victron Temperature sensor for BMV-702 and 712
Temperature sensor for BMV-702 or BMV-712 battery monitor. This product will only work with a BMV-702 or BMV-712 battery monitor.
Victron UK Mains Power Cord for Smart IP43 / Skylla-S - 2m
UK 230V mains power cord for Smart IP43 & Skylla-S units. Length: 2m
Victron VE Transfer Switch 10KVA, 1ph, 200-250Vac
The VE Transfer Switch has been designed to switch sensitive loads, such as computers or modern entertainment equipmentfrom one AC source to another. The priority source typically is the mains, a generator or shore power.
Victron VE.CAN NMEA 2000 Cable
Use this cable to connect a Victron product with a VE.Can port to a NMEA2000 network.
Victron VE.Direct Bluetooth Smart Dongle
Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data.Â
Victron VE.Direct Cable 0.9m
ASS030530209: Victron Ve Direct Cable 0.9M The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control.
Victron VE.Direct Cable 1.8m
ASS030530218: Victron Ve Direct Cable 1.8M The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control.
Victron VE.Direct Cable 10m
ASS030530310: Victron Ve Direct Cable 10M The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control.
Victron VE.Direct Cable 3m
ASS030530230: Victron Ve Direct Cable 3M The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control.
Victron VE.Direct Cable 5m
ASS030530250: Victron Ve Direct Cable 5M The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control.
Victron VE.Direct to BMV60xS Cable 3m
Used to connect the BMV-600 series Battery Monitors to VE.Direct Enabled controllers
Victron Venus GX
The Venus GX is the communication-centre of your installation. Venus allows you to talk to all components in your system and ensure they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via our free-to-use Victron Remote Management Portal (VRM).
Victron VPN000200000 VE.Net GMDSS Panel
The VE.Net GMDSS panel remotely monitors the Victron Skylla-TG GMDSS charger and allows easy access to all important data. Alarm settings are pre-set but can also be re-programmed.
Victron Wall Mount Enclosure for Color Control GX
Wall mount enclosure for Color Control GX.
