Grid
List
Garmin Transom Mount Bracket for LVS34 LiveScope Plus Transducer
Transom Mounting bracket for the Garmin LVS34 Livescope Plus transducer.
Garmin Trolling Motor Barrel Mount for LiveScope XR LVS62 Transducer
Mount a compatible LiveScope transducer on the barrel of a trolling motor with this kit. It is easily adjustable as it features molded teeth and fits all barrel diameters, including those on popular MinnKota and MotorGuide trolling motors.
Garmin Trolling Motor Shaft Mount for Panoptix LVS32
Mount a compatible Panoptix transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including those on popular Minn Kota® and MotorGuide® trolling motors.
Garmin Trolling Motor Transducer Adapter Kit
Mount an AIRMAR TM150M transducer with CHIRP technology to a trolling motor with this adapter kit.
Furuno IFNMEA2K2 NMEA Data Converter
IF-NMEA2K2 The IF-NMEA2K2 is an interface to convert data from NMEA0183 format to NMEA2000 / CAN bus format and vice versa. In addition to the normal conversion mode, the High Speed mode to convert sensor data for Autopilot as well as an AIS mode dedicated to AIS data are available in one compact unit. With these three modes, you can optimize the conversion speed depending on the situational requirements.
Furuno IFNMEAFI Analogue NMEA Converter
The analog to NMEA2000 converter IF-NMEAFI (00002704700) is supplied as an option to connect the wind sensor FI-5001/L or analog tank gauge to the FI-70 network.
Garmin 12V Micro USB Power Cable
Garmin Vehicle Power Cable mini USB.
Garmin Retractable Lanyard
Keep any handheld device close and secure with this retracable lanyard.
Garmin 2nd Mounting Station EchoMAP
Mount any additional echoMAP or GPSMAP on your boat with this second mounting station. Also includes a wiring harness to power your compatible device and connect to an optional NMEA 0183 network.
Garmin 2nd Mounting Station for GPSMAP 521-556
Mount any additional chartplotter on your boat with this second mounting station. Also includes a wiring harness to power your compatible device and connect to an optional NMEA 0183 network, CANet device and transducer. .
Garmin Auto Friction Mount Kit with Speaker
Keep your compatible outdoor device in view as you drive with this portable dashboard mount. Includes friction mount with integrated speaker and power cable.
Garmin Bail Mount for GPSMAP 720/740
Surface mount your compatible GPSMAP® device with this bail mount with knobs. .
Garmin Bail Mount for GPSMAP 7407/7607
Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.
Garmin Bail Mount for GPSMAP 7416/7616
Surface mount your GPSMAP using our bail mount with knobs. The mount swivels and tilts for optimum viewing.
Garmin Bail Mount for GPSMAP 923
Surface mount your compatible GPSMAP device using our bail mount with knobs. The mount tilts for optimum viewing.
Garmin Bail Mount for STRIKER 9
Secure your compatible marine device with this mount, featuring tilt capabilities for optimum viewing.
Garmin Bail Mount with Knobs GPSMAP 7410 / 7610
Surface mount your GPSMAP using this bail mount with knobs. The mount tilts for optimum viewing.
Garmin Bar Mount for GPSMAP 276Cx
Take your Montana anywhere and everywhere with this handlebar mount. Simply snap your device - in any orientation, portrait or landscape - into the 22 to 32 mm rugged mount, which attaches to any standard bicycle handlebar, and it's ready for your next cycling tour or mountain biking adventure. A molded rubber cushion is included in the kit to increase the mount's grip on the handlebar and also to prevent rotation during possible vibration. Kit also includes hardware and instructions.
Garmin Protective Cover for 5" Striker Fishfinders
This protective cover fits Compatible Garmin Striker 5" fishfinders, helping to keep it safe from the harsh marine environment when not in use.
Garmin Protective Cover for 9" Striker Fishfinders
This protective cover fits Compatible Garmin Striker 9" fishfinders, helping to keep it safe from the harsh marine environment when not in use.
Garmin Protective Cover for echo 100-301
The protective cover fits snugly over the display of echo 100, 150 and 300c to help protect them when not in use. .
Garmin Protective Cover for EchoMAP 4"
Our protective cover fits your compatible ECHOMAP™, helping to keep it safe from the harsh marine environment when not in use.
Garmin Protective Cover for EchoMAP 92/95
Our protective cover fits your compatible echoMAP™, helping to keep it safe from the harsh marine environment when not in use.
Garmin Protective Cover GPSMAP 7410
This protective cover fits your compatible device, keeping it safe from the harsh marine environment when not in use.
Garmin Protective Sun Cover for 7" Striker Fishfinders
This protective cover fits Compatible Garmin Striker 7" fishfinders, helping to keep it safe from the harsh marine environment when not in use.
Garmin Swivel Mounting Bracket for GPSMAP 520-546
Mount your chartplotter or sounder with this swivel mounting bracket.
Garmin Tilt/Swivel Mount for STRIKER Plus 4/Vivid 4
Secure your compatible marine device with this mount that features tilt/swivel capabilities for optimum viewing.
Garmin Universal Carrying Case
Durable all-around protection for your handheld device. Protects your device while in storage or in the field. Wide zippered opening and a belt loop for accessibility and portability. Size: 18.8 x 7.6 x 3.6 cm.
Garmin 4 Pin to NMEA 2000 Male Adapter Cable
Connect your compatible 5-inch ECHOMAP™ CHIRP chartplotter/sounder combo to a NMEA 2000 network with this 6 foot (2 meters) adapter cable.
Garmin 7 Pin Power/Data Cable for GHC/GMI/GNX Instruments
Connect your GMI™ 20 or GHC™ 20 to a NMEA 0183 device with this 7-pin power/data cable. Features 90-degree connector for installation in tight spaces or flush mounting. .
Garmin BlueNet 20 Switch
Increase the number of available network ports in a Garmin BlueNet network. Once you’ve used all the ports on your compatible chartplotter just add a Garmin BlueNet 20 switch to the setup and keep constructing your expansive high-speed network.
Garmin BlueNet 30 Gateway
The Garmin BlueNet 30 gateway is required for Garmin BlueNet network compatible devices to network with legacy Garmin marine devices. Through this gateway you can connect a Garmin BlueNet network to a legacy Garmin Marine Network for a premium control experience.
Garmin BlueNet Cable - 500'
The Garmin BlueNet network cables offer various lengths to help with installations. Various sizes sold separately. Consider purchasing the Field installable Adapter Kit for the Garmin BlueNet network if purchasing this 500-foot-long cable.
Garmin BlueNet Marine Network Cable - 6' 1.83M
The Garmin BlueNet marine network cables are available in a variety of cable lengths to help with installations.
Cable length: 6' (1.83m)
Garmin Field Installable gWind Connectors
Use these water resistant male/female field-installable connectors at the foot of the mast for easy connection of the mast cables on Garmin's gWind wind sensors when stepping the mast.
Garmin GND 10 Black Box Nexus to NMEA 2000 Bridge
The GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus Network and NMEA 2000 to provide compatibility between Nexus and Garmin products, including gWind, gWind Wireless and gWind Race transducers. Simple plug-and-play installation between Nexus and NMEA 2000, with USB connectivity, eliminates the need for user setup...
Garmin Marine Network Cable POE Isolation Coupler
Connect a thermal camera, underwater lighting or boart stabilizing system to a compatible GPSMAP® series Garmin chartplotter with this PoE (Power over Ethernet) isolation coupler. The coupler provides connectivity to the Garmin Marine Network; without it the network will not function correctly and could possibly damage your Garmin unit and/or PoE device.
Garmin NMEA 2000 Backbone / Drop Cable 30 cm
Extend your NMEA 2000 backbone with the 1 ft. (0.3 m) backbone/drop cable.
Garmin NMEA 2000 Field-installable Connector - Female
Use the female NMEA 2000 field-installable connector to create custom-length drop cables and backbone extension cables.
Garmin NMEA 2000 Field-installable Connector - Male
Use the male NMEA 2000 field-installable connector to create custom-length drop cables and backbone extension cables.
Garmin NMEA 2000 Inline Terminator
Use the inline terminator between the backbone cable and your compatible device to correctly terminate the network.
Garmin NMEA 2000 Multi-Port T-Connector
Make NMEA 2000 installations easier with our multi-port T-connector. This solution creates a more robust NMEA 2000 backbone by reducing issues with breaking points as well as stress induced by long back bones. The rigid construction is less prone to failure and decreases installation time.
Garmin NMEA 2000 Power Isolator
The NMEA 2000 power isolator is useful to ensure proper installation of the NMEA 2000 network in separating different power sources that could power the bus. Some NMEA 2000 capable engines can potentially provide power to the NMEA 2000 bus. The NMEA 2000 power isolator is useful because it makes sure the NMEA 2000 power from the engines and system power are kept separate.
Garmin NMEA 2000 Starter Kit
Garmin's starter kit has everything you need to build a basic NMEA 2000 network on your boat. The kit includes an NMEA 2000 drop cable (2 m), backbone cable (6 m), power cable (2 m), 2 T-connectors, and male and female terminator connectors.
Garmin NMEA 2000 Terminator - Female
This standard female NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network.
Garmin NMEA 2000 Terminator - Male
This standard male NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network.
Garmin NMEA2000 1 Port T-Connector
Add components to any NMEA 2000 network by installing this T-connector on the backbone cable. The revised version of this T-connector is offset by 45 degrees compared to the previous version.
Garmin NMEA2000 Power Isolator
Use this power isolator to ensure sources that could power the bus are separated properly during installation of the NMEA 2000 network.