Grid
List
75mm Woven Exhaust Lagging - 30m roll
GLASS FIBRE WOVEN TAPE
Suitable for exhaust systems
Fire proof. Temperature resistant to 550°C
Good thermal and acoustic insulation
Excellent chemical resistance
Retains shape, non water absorbent.
30m roll
Marine Engine Exhaust Waterlock Silencer 40,45,50mm
Waterlock silencer manufactured of high quality plastic suitable for marine use and boat engines, this model of exhaust waterlock silencer is suitable for 40, 45 & 50mm diameter exhaust hose.
Installed within the exhaust system it will dramatically reduce noise
40mm/45mm/50mm Hose Connection
Size: 640L x 225W x 230H
Exhaust Gooseneck
Exhaust Gooseneck
Anti syphon gooseneck which prevents water entering the engine via the transom.
Supplied with stepped hose connection to suit 40mm, 45mm or 50mm exhaust hose and plastic fixing straps.
Hose Size: 40 - 45 - 50mm
Body Size: Width 110mm x Height 480mm
Weight: 0.70kg
Vetus Type NLP Waterlock
The NLP Waterlock compliments the well known and proven range of LP waterlocks, VETUS has now introduced several new models, type NLP, made of injection-moulded plastic materials.
These have the benefits of being durable, corrosion proof and light in weight, the new NLP waterlocks are of dual stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube...
Vetus Exhaust Gooseneck
Vetus Exhaust Gooseneck
Gooseneck for exhaust hose with 40 - 45 - 51 mm internal diameter.
Raises the exhaust hose above the waterline so that water cannot backfill the exhaust system.
Vetus Anti-Syphon Vent
Vetus Anti-Syphon Air vent suitable for hoses of Ø 1/2', 3/4', 1' and 1-1/4' ,13, 19, 25 and 32 mm I.D.
If the point of injection of the cooling water is situated at a height less than 6' above the water line, then when the engine is stopped there is a risk that, as a result of syphoning, the cooling water may enter the engine.
Such syphoning may be avoided by positioning a VETUS air vent into...
Vetus Transom Exhaust Connection
Vetus TRC Transom Exhaust Connection with Check Valve
The exhaust hose can be fitted directly to this transom connection using heavy duty stainless hose clamps.
Vetus WS180 Water Separator/Fuel Filter
Vetus Water Separator/Fuel Filter
The WS180 is suitable for petrol & diesel marine engines
Connections:M14 x 1.5 female thread
Capacity:180L/Hour Weight: 0.7kg
Size: H207 x D85mm
Inline Plastic Diesel Filter 6/8mm Hose
Diesel Filter
Inline Plastic Diesel Filter 6/8mm Hose 2000 cc max
Easy to fit with suitable hose clips
Engine Fuel Water Separator
Water and contaminants accumulating in the fuel tank can often cause engine failure, this can be solved by using a combination fuel water separator which allows the water droplets to drain off in to the clear plastic bowl.
Suitable diesel engines up to 200hp.
The separator filter has an aluminium head unit with replacable fuel filter and a transparent plastic water bowl.
Supplied with a drain plug.
Fuel...
Diesel Filter M14x1.5 Thread with Metal Bowl & Plug
Single fuel filter with metal settling bowl making it suitable for inland waterways craft and bleed screw complete with interchangeable cartridge for engine max 3500cc.
Capacity 50 LPH
Metric Thread connections
Fuel Fitting connections sold seperately
Engine Fuel Water Separator Replacement Filter
Replacement Filter
Standard filter cartridge for CAV filter heads resistant to corrosion and used on many marine engines.
Engine Fuel Water Separator Hose Connection Kits
Hose Connection Kit
Fuel line connections
Connections: M14 x 1.5 female thread
PSP Silicone Fusion Tape
PSP Silicone fusion tape is manufactured from a silicone rubber compound which fuses to itself but will not stick to other items.
It resists salt water and can even be applied underwater.
If you need to remove the tape it leaves no "mastic" residue.
Resists extreme temperatures: -54deg C to +260deg C
Insulates electrics with a dielectric strength of up to 400VPM
Creates a moisture proof silicone sheath
Will...
AG Bellows 1-1/2" BSP Male to Female 24" Length
Stainless braided male to female flexible exhaust.
9Ltr Oil Drain Container
Heavy Duty 9Ltr Plastic Oil Drain Container
Re-usable plastic oil drain can, ideal for safe and clean oil sump drain. Simply drain off engine oil in to the container, secure the cap and dispose responsibly.
Dimensions: (H x W x D) 39 x 29 x 12.5cm
Seago Extract-It 6Ltr Vacuum Oil Extractor Pump
An exceptional pump in that the Seago Extract-It vacuum oil extractor pump can be used to change oil with no fuss or mess on boats, cars, motorbikes & anything that has an engine.
Between 10 to 20 strokes of the Vacuum Oil pump creates a powerful vacuum which can then suck out the dirty engine oil or any other inaccesible areas such as the bilges.
The dirty oil is sealed inside the tough durable...
Brass Engine Oil Sump Pump
Brass manual oil change pump for extracting engine oil from inboard engines.
Simply run the engine for a short time to heat the oil, then turn off engine and insert the longer of the nylon tubes in to the engine dipstick hole.
The shorter length of nylon tube can dispense the used oil in to a separate container.
Gently pump to draw up the used oil in preparation for a complete oil change.
The...
Oil Absorbtion Cloths
Oil spills can be a real inconvenience especially when the area has restricted access, these absorbtion cloths fully absorb oil, petrol, chemicals and grease.
Environmentally friendly
Absorbtion capacity 1Ltr
Insensitive to water
Size: 46cm x 46cm
3 Pack
Oil Absorbtion Buffer
Oil spills can be a real inconvenience especially when the area has restricted access, this easy to clean Buffer/Swab will fully absorb oil, petrol, chemicals and grease up to 7.5ltr.
Environmentally friendly
Absorbtion capacity 7.5Ltr
Insensitive to water
Length: 55cm
Dia: 10cm
30mm Sound Proof Insulation Foam 1m x 0.6m
Designed for boat engine rooms, the reinforced foil faced (oil and tear resistant) laminated acoustic barrier foam is basically non-combustible and meets ISO 9094 of the recreational craft directive.
It is to the highest rating (zero) of the fire retardant requirement of BS476 Part 6 and 7.
Sheet Size: 1.0 x 0.6mtr
30mm thick
Fixings not included, check compatibility before using adhesives.
This...
Dynamat Dynacore Engine Bay Sound Absorber
Dynamat DynaCore, a modern, lightweight heat and sound absorber.
Boasting excellent low-frequency absorption and heat resistance up to 350° F, its perfect for engine compartments, car and boat interiors and more. Moisture, UV resistant and made from recycled materials, its a reliable choice for noise and heat control.
Dynamat DynaDeck
DynaDeck combines a 1lb/sq.ft, 1/8 inch waterproof black vinyl barrier with a 1/4 inch closed cell rubber to block engine and exhaust heat, and quiet road noise. As DynaDeck is completely weatherproof and waterproof, it is ideal for use in vehicles where a durable, waterproof floor material is desired.
DynaDeck is simple to install. It is a thick and heavy material, so no adhesive is needed. Because...
Dynamat Dynaliner Heat & Noise Insulation
Dynamat Dynaliner is a lightweight, superior heat-blocking insulator. Oil-resistant, water-repellent, and perfect for a range of surfaces, it offers excellent thermal insulation and acoustic isolation. Easy to use with peel & stick adhesive, it ensures optimal performance in extreme temperatures.
Marine 16 Diesel Bug Treatment
A broad spectrum biocide formulated to prevent & eradicate the microbial contamination of fuel from Yeast, Mould and Bacteria commonly known as "Diesel Bug"
Disperses into both the water and fuel phases in your tank and will remain sufficiently active for over a year at both high and low temperatures
A 100ml bottle is sufficient to prevent diesel bug growth in 2000 litres of fuel...
Morris K99 Water Resistant Stern Tube Grease 500g
K99 WATER RESISTANT GREASE
APPLICATION:
Specially designed by Morris to feed evenly around the propeller shaft in the stern tube.
PERFORMANCE:
Outstanding water resistance qualities providing excellent protection of parts from corrosion and has good sealing properties.
Physical Characteristics
Appearance: Light Brown Smooth Grease
NLGI: 2/3
Operating Temp Range: -20ºC to...
Granville Marine White Grease 500gm
Granville Marine White Grease
Marine White Grease is a high quality mineral oil based product with solid lubricant additives.
Marine White Grease has been formulated specifically for use in areas of high water ingress including both fresh and salt water. Designed for the lubrication of plain bearings, ball & roller bearings and for most general lubrication duties especially in aqueous conditions.
The...
Quicksilver Storage Seal Fogging Oil
Fogging Oil or Storage Seal
Quicksilver storage seal fogging oil is a blend of corrosion inhibiting additives designed to coat internal engine components during engine storage and reduce the formation of surface rust.
Storage seal should be used on 2 and 4 stroke engines during the season if the engine sits idle for any length of time over 1 month or whenever prolonged storage or layup is necessary.
Granville Marine White Spray Grease with PTFE
Granville white spray grease with PTFE is formulated to repel water, resist heat and protect against corrosion especially salt water.
Provides long lasting protection to all inboard and outboard engine linkages, gears, bearings, shackles, and battery terminals.
500ml aerosol
Quicksilver 2-4-C Marine Grease with PTFE 8oz
Quicksilver 2-4-C marine grease is a multi-purpose lubricant that withstands extreme friction and won’t break down when mixed with water.
The following chart outlines the general lubrication points and intervals for sterndrive or inboard.
Follow the maintenance schedule for your specific engine as outlined in your owner’s manual.
8oz Tube
Vetus Hydraulic Oil 1 Litre HLP46
The Vetus Hydraulic Oil HT is an oil for all hydraulic systems.
This product has paricularly high EP and corrosion-resistant properties and is marine approved.
Surpasses DIN 51524-2 HLP requirements.
Size 1 litre
Vetus Hydraulic Steering Oil ISO VG15, 1 litre
VETUS Hydraulic Steering oil is a very thin, hydraulic steering oil for optimal functioning in all temperatures.
SPECIFICATIONS
22 CST, DIN 51524
Marine 16 Diesel Fuel Complete
Marine 16 Fuel complete is a multi-functional fuel treatment that will maintain the quality of stored fuel, keep fuel systems clean and prevent the growth of Diesel Bug. DFC prevents degradation. Combats effects of using Ultra Low Sulphur Diesel (ULSD) and BioDiesel.
DFC also contains a demulsifier helping to drop water to the bottom of the tank where it can be easily removed from the drain or if...
Fuel Set - Fuel Treatment & Conditioner
Fuel Set Fuel Treatment - Dosage Bottle
Water in fuel and fuel contamination is one of the biggest problems facing boat owners with vessels being left for weeks and sometimes months the fuel degrades becomes contaminated and contributes to engine failure.
Our #1 best selling fuel additive, Fuel Set is well established as a complete fuel conditioner that maintains a clean fuel system, giving substantial...
Starbrite StarTron Diesel Additive
StarTron Diesel Treatment is a multi-functional fuel additive which uses a unique enzyme technology that allows all engines to start easily and run smoothly, even after sitting idle for months.
Star Tron® eliminates and prevents fuel problems, breaks down excess water and sludge to sub-micron size, allowing it to be safely burned away during normal engine operation.
Features:
Helps increase fuel...
Starbrite StarTron Petrol Additive
StarTron Petrol Additive
Star Tron Enzyme Fuel Treatment is a multifunctional fuel additive which uses a unique enzyme technology that allows all engines to start easily and run smoothly, even when using ethanol-blended fuel or after sitting idle for months.
Star Tron® eliminates and prevents ethanol fuel problems.
Star Tron breaks down excess water and sludge to sub-micron size, allowing it to...
LIQUI MOLLY 2T DFI Motor Oil
Semi-synthetic, ultra-high-performance 2-stroke motor oil specially developed for the marine sector. Specially developed to satisfy the complex requirements of the latest generation of direct injection engines. Convinces with maximum corrosion and motor protection and ensures smooth operation in all load conditions. Ensures optimum lubrication even at high operating temperatures, guarantees maximum...
Liqui Moly High Performance Marine 4T Motor Oil 15W-40
Liqui Moly Marine 4T Motor Oil – Multi-purpose motor oil for inboard and outboard engines. Approved by NMMA FC-W® certification
The operating instructions issued by the manufacturer of the engine or unit must be followed.
Approvals
ACEA A3, ACEA B4, ACEA E7, API CI-4, API SL, Mack EO-N, MAN M 3275-1, MTU Typ 2, Renault Trucks RLD-2, Volvo VDS-3
LIQUI MOLY Marine 4T Motor Oil 10W30
High-performance low-friction motor oil based on synthetic technology. Provides increased corrosion and wear protection as well as quick oil penetration of the engine and turbocharger with additives specially adapted to maritime use. Exceeds leading engine manufacturers' requirements. Fulfils warranty cover provided by manufacturers who require NMMA FC-W Catalyst Compatible® approval.
Properties...
LIQUI MOLY Marine 4T Motor Oil 10W40
High-performance low-friction motor oil based on synthetic technology with modern additive technology. Specially developed for maritime use. Provides excellent wear and corrosion protection and maximum engine cleanliness. Meets leading engine manufacturers' requirements. Tested for use with catalytic converters and turbochargers.
Properties - high wear resistance - high engine cleanliness -...
LIQUI MOLY Marine 4T Motor Oil 25W40
High-performance motor oil with synthetic additives specially adapted to maritime use. Even under extreme operating conditions, it provides for a stable lubricating film. Keeps engine seals, such as shaft sealing rings and valve stem seals flexible and minimizes oil consumption. Meets leading engine manufacturers' requirements. Fulfils warranty cover provided by manufacturers who require NMMA FC-W...
LIQUI MOLY Marine Single Grade SAE30
Single-grade mineral motor oil for gasoline and diesel engines with a naturally high viscosity index. It provides for a stable lubricating film even under extreme operating conditions. Its high alkaline reserve prevents corrosion even when diesel fuel with a high sulfur content is used. Lightly doped for use in classic engines as well. Prevents sludge formation and offers reliable protection against...
Quicksilver Premium 2 Stroke Outboard Engine Oil - 1Ltr
Quicksilver 2 stroke TC-W3 outboard engine oil specifically formulated with a marine additive package to meet the needs of low to mid horsepower outboard engines, under general marine operating conditions.
Exceeds TC-W3 standards
Reduces rust and corrosion of internal components
Meets all outboard and personal watercraft manufacturers recommendations for use of TC-W2 and TC-W3 oils in pre-mix or oil-injected...
Quicksilver Premium 2 Stroke Outboard Engine Oil - 4L
Quicksilver 2 stroke TC-W3 outboard engine oil specifically formulated with a marine additive package to meet the needs of low to mid horsepower outboard engines, under general marine operating conditions.
Exceeds TC-W3 standards
Reduces rust and corrosion of internal components
Meets all outboard and personal watercraft manufacturers recommendations for use of TC-W2 and TC-W3 oils in pre-mix...
Quicksilver Premium Plus 2 Stroke Outboard Engine Oil - 1Ltr
Quicksilver Premium Plus 2 stroke engine oil is specifically formulated with a higher concentration marine additive package to meet the needs of high horsepower outboard engines including direct fuel-injected engines in extreme marine operating conditions.
Cleanest burning - reduces carbon build-up in exhaust system
Superior lubrication
Meets all outboard and personal watercraft manufacturers' recommendations...
Quicksilver Premium Plus 2 Stroke Outboard Engine Oil - 4Ltr
Quicksilver Premium Plus 2 stroke engine oil is specifically formulated with a higher concentration marine additive package to meet the needs of high horsepower outboard engines including direct fuel-injected engines in extreme marine operating conditions.
Cleanest burning - reduces carbon build-up in exhaust system
Superior lubrication
Meets all outboard and personal watercraft manufacturers' recommendations...
Quicksilver SAE10W-30 4 Stroke Outboard Engine Oil - 1Ltr
SAE 10W-30 Quicksilver 4 Stroke Outboard Engine Oil specifically formulated and developed to meet the needs of all 4-stroke outboard engines and developed for the rigors of the marine environment. The all new 4-Stroke oil technology outperforms automotive oils in marine applications because of its specialised additive package designed for marine engines. The NEW mineral 4-Stroke oil is also now approved...
Quicksilver SAE 10W-30 4 Stroke Outboard Engine Oil - 4Ltr
SAE 10W-30 Quicksilver 4 Stroke Outboard Engine Oil specifically formulated and developed to meet the needs of all 4-stroke outboard engines and developed for the rigors of the marine environment. The all new 4-Stroke oil technology outperforms automotive oils in marine applications because of its specialised additive package designed for marine engines. The NEW mineral 4-Stroke oil is also now approved...