Special Offers
Special Offer - Save £4.97. Buy any 4 for £34.99
Bainbridge Marine Sailcloth Holdall only £4.99 when you spend over £150!
Bainbridge Marine Sailcloth Holdall only £3.99 when you spend over £150!
Special discount - Nauticclean 09 Professional Universal Cleaner 1l only £4.99!!!!
Special discount - Nauticclean 09 Professional Universal Cleaner 1l only £4.99!!!!
Valid with any purchase - add at checkout..
Stainless Steel Stemhead Bow Roller 159mm
Stainless steel stemhead bow roller, perfect for smaller boats it has a rubber roller built in to a stainless steel support.
Base is 100 mm x 50 mm
Overall length is 160 mm
Fixings: 3x M10
Brass Engine Oil Sump Pump
Brass manual oil change pump for extracting engine oil from inboard engines.
Simply run the engine for a short time to heat the oil, then turn off engine and insert the longer of the nylon tubes in to the engine dipstick hole.
The shorter length of nylon tube can dispense the used oil in to a separate container.
Gently pump to draw up the used oil in preparation for a complete oil change.
The...
Stainless Steel Twist Lock Hasp and Staple
Stainless Steel (304) hasp and staple with twist lock and padlock eye, suitable for cabin or locker doors.
Two Sizes:
Dimensions when hasp is closed: 24mm x 64mm
Dimensions when hasp is closed: 24mm x 91mm
Guidi Bronze Lever Operated Ball Valve F-F Full Flow Bronze Body - 3/4 in
Guidi Bronze lever operated ball valve. Steel handle with plastic grip. Full flow operation with female and male BSP parallel ISO 228 thread.
Stainless Steel Stemhead Bow Roller 280mm
304 Stainless steel bow roller stemhead fitting with strong rubber roller, suitable for medium size cruisers and dayboats.
Dimensions: O/A L280 x W58mm
Base Length: 180mm
Fixings: 6 x M6csk
Stainless Steel Lockable Hasp and Staple
Stainless steel locking hasp and staple
Length: 80mm (closed)
Width: 30mm
With key
Guidi Bronze Lever Operated Ball Valve F-F Full Flow Bronze Body - 1 in
Guidi Bronze lever operated ball valve. Steel handle with plastic grip. Full flow operation with female and male BSP parallel ISO 228 thread.
Seaflo 0.75Ltr Pressurised Accumulator Tank
0.75Ltr Presurised Water System Accumulator Tank
A pressurised accumulator tank is designed for installation in any pumped water system that is controlled with a pressure switch. Like a reservoir it collects and stores air and water downstream from the pump and cushions any variation in pressure and flow between the pump and system discharge points, whilst reducing vibration. This helps to prolongs...
Stainless Steel Rail Mount Flag Pole Socket
This beautiful socket is rail mounted with minimal visible fixings.
A secure, stylish and easy way to mount flags to a pushpit or pullpit handrail, simple hinged design for easy attachment of the flag pole.
316 Stainless Steel casting.
For 1' (25.4mm) Flag Staff
Grub screw secures to rail
Sleeve not included
25mm and 30mm rail available
Talamex 16mm x 15mtr Pre-Spliced Mooring Line
Braided polyester 16 plait mooring dockline with high elasticity and spliced eye.
The line stays smooth, non-kinking and supplied with 40cm spliced eye and whipping on the splice and plain end of the line.
Size:16mm dia. x 15mtr
Cover: Polyester
Core: Polypropylene
Construction: 16-plait
Breaking: 3110kg
Talamex Compact 12v Electric Horn
Compact electric boat horn with stainless steel cap and plastic base, supplied with mounting bracket and rubber pad.
Dimensions: Length 99mm x Width 83mm x Height 51mm
Rating: 106db@ 1Meter
12v
Guidi Bronze Lever Operated Ball Valve F-F Full Flow Bronze Body - 1 in 1/4
Guidi Bronze lever operated ball valve. Steel handle with plastic grip. Full flow operation with female and male BSP parallel ISO 228 thread.
Seaflo 1Ltr Pressurised Accumulator Tank
1Ltr Presurised Water System Accumulator Tank
A pressurised accumulator tank is designed for installation in any pumped water system that is controlled with a pressure switch. Like a reservoir it collects and stores air and water downstream from the pump and cushions any variation in pressure and flow between the pump and system discharge points, whilst reducing vibration. This helps to prolongs...
Oil Absorbtion Buffer
Oil spills can be a real inconvenience especially when the area has restricted access, this easy to clean Buffer/Swab will fully absorb oil, petrol, chemicals and grease up to 7.5ltr.
Environmentally friendly
Absorbtion capacity 7.5Ltr
Insensitive to water
Length: 55cm
Dia: 10cm
Universal Ski Mirror
Large rear view Ski Mirror giving clear vision with minimal distortion when waterskiing or wakeboarding. The mirror can be installed either on dash or windshield frame extrusions, up to a thickness of 6mm. Compact, lightweight and adjustable and secured with self-adjusting ball socket, a water skiing requirement.
Provides 180 degrees rear vision
Shatterproof convex lens eliminates blind spots.
Mirror...
Boat Sit Comfort Cushion
Comfort Boat Cushion
Designed by a physical therapist with a passion for boats and watersports, this ergonomically designed boat cushion offers maximum comfort and is especially good for those with back problems as the pressure is distributed automatically to the right seated position.
These boat cushions have a high density foam moulded back-rest, water resistant outer cover and non-slip patch...
Guidi Bronze Lever Operated Ball Valve F-F Full Flow Bronze Body - 1 in 1/2
Guidi Bronze lever operated ball valve. Steel handle with plastic grip. Full flow operation with female and male BSP parallel ISO 228 thread.
Seaflo Self Priming Impeller Pump
Seaflo Self Priming Impeller Pump
Tough reliable self priming impeller pump for the removal of bilge water and industrial fluids.
12v or 24v
Self Priming to 3mtr
Priming/suction lift to 1.2mtr
30LMP (8GPH)
13mm/1/2" FNPT
80mm dia. rubber impeller
60ºC temperature limit
Performance to match Jabsco Water Puppy
4 YEAR WARRANTY
Telescopic Aluminium Boat Hook 120 - 210cm
A boat hook is an inexpensive basic piece of "must have" equipment for any vessel.
This anodised aluminium telescopic boat hook is sturdy, lightweight and easily stowed on board and easy to use by all crew members. The 1/4 twist to lock action allows the pole to easily be set at the desired length.
Used to retrieve moorings and lines this boat hook is supplied with rubber grip and plastic...
66 mm Stainless Steel Fixed Snap Shackle
Stainless steel fixed snap shackle.
Guidi Bronze Lever Operated Ball Valve F-F Full Flow Bronze Body - 2 in
Guidi Bronze lever operated ball valve. Steel handle with plastic grip. Full flow operation with female and male BSP parallel ISO 228 thread.
Seaflo Engine Sea Water Strainer Small
New style engine seawater strainer, robust and with clear lid making it easier to inspect and clean to prevent potential blockage.
Mount above water line
Mount vertical
Always use flexible hose connections
Install with valve/seacock and strainer
Clear lid must be hand tightened only
Dimensions: Dia. 101.5mm x Height 163mm (H incl hose fittings)
Output: 13mm = 23l/m, 16mm = 35l/m,...
Polished Stainless Steel Spring Loaded Lift ring
Stamped 304 sprung loaded stainless steel flush lifting ring, suitable for lockers, floor boards and other onboard or DIY applications.
Size: 66mm x 55mm
96 mm Stainless Steel Fixed Snap Shackle
Stainless steel fixed snap shackle.
William Smith Left Hand Palm No.3
Excellent quality sailmakers palm. Handcrafted in England, these seaming and roping palms are made for long lasting wear and comfort. Molded rawhide palm protection.
Seaflo Engine Sea Water Filter - Large
Engine seawater filter with clear lid making it easier to inspect and clean to prevent potential blockage.
Mount above water line
Mount vertical
Always use flexible hose connections
Install with valve/seacock and strainer
Clear lid must be hand tightened only
Dimensions: Dia. 148mm x Height 191.5mm
Output: 25mm = 91l/m, 32mm = 143l/m, 38mm = 200l/m
25mm, 32mm, 38mm Stepped Hose...
Seaflo 8ltr Accumulator Tank - Expansion Vessel
8ltr Accumulator Tank or Expansion Vessel
The accumulator tank or expansion tank functions on the principle that air will compress under pressure whilst fluids will not.
An accumulator half fills with water as the pump operates meaning that depending on the size of the tank you can run off small amounts of water without the pump cutting in, thus prolonging the life of the pump.
The air also...
Glomex WeBBoat 4G Lite EVO WiFi Internet Antenna
The NEW WeBBoat 4G Lite EVO is the latest system from Glomex that allows you to surf the web onboard, up to 15 miles offshore. With a compact footprint, it provides a fast and reliable connection that doesn’t take up much space and is equipped with 2 x 4G & 1 x WiFi antenna's creating an onboard superfast and secure WiFi hotspot using single SIM Europe, Middle East, Africa and Asia.
The...
Guidi Nickel Plated Bronze Water Strainer in Ionio in 1 in
Guidi Nickel Plated bronze water strainer. With polycarbonate cover
Handy Dock Boat Hook with 1.36 to 2.5mtr Telescopic Pole
The Handy Duck now more aptly renamed Handy Dock with long telescopic handle quick mooring hook makes mooring easy with its unique simple trigger mechanism. The Handy Dock head has an apperture of 30mm and the telescopic handle make it ideal for capturing buoys, cleats or mooring lines.
The Handy Dock poles are made from lightweight fibreglass which is incredibly strong and impervious to sea...
Compact Manual Bilge Pump 1' 25mm
A manual compact hand bilge pump made from non-corosive materials.
Barbed inlet and outlet nozzles accomodate 25mm hoses.
Surface or thru-deck mount, with a fixed handle.
Up to 10 litres of water per 30 strokes in one minute.
Compact bilge pump 180mm x 125mm x 75mm
Guidi Nickel Plated Bronze Water Strainer in Ionio in 1 in 1/4
Guidi Nickel Plated bronze water strainer. With polycarbonate cover
Seaflo Multi Inlet Shower Sump System
This compact, full-capacity shower drain system is activated by an internal float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer.
Inlet Connections: 19mm (3/4'), 25mm (1'), 29mm (1-1/8')
Outlet Connection:...
Galvanised Claw Bruce Anchor 7.5kg
7.5Kg Glavanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Guidi Nickel Plated Bronze Water Strainer in Ionio in 1 in 1/2
Guidi Nickel Plated bronze water strainer. With polycarbonate cover
Stainless Steel Swivelling Anchor Connector
AISI 316 stainless steel anchor/chain swivelling connector which allows smooth sliding of the chain by eliminating the possibility of jamming in either the stemhead or chain stopper. Suitable for
DIN 766 Chain: 6-8mm
Working load: 850kg
Breaking load: 1275kg
DIN 766 Chain: 10-12mm
Working load: 1350kg
Breaking load: 2700kg
Galvanised Claw Anchor 10kg
10Kg Galvanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Guidi Nickel Plated Bronze Water Strainer in Ionio in 2 in
Guidi Nickel Plated bronze water strainer. With polycarbonate cover
Outboard Tiller Extension Handle - 633-1013mm
Universal, telescopic outboard tiller extension, manufactuered in anodised aluminium to prevent corrosion with plastic grip.
Easily clamped to the outboard tiller by the clamp screw.
Adjustable Length: 60 - 120cm
Universal fitting
25mm/30mm dia.
Outboard Engine Universal Fuel Line Assembly
Universal Fuel Line Assembly with plain ends which can be fitted to any of our standard fuel line connectors allowing simple connection to fuel tank and engine.
The universal fuel line is approx 2mtr long
Reinforced hose that doesnt harden
Primer Bulb included
Fuel line connectors sold separately
Galvanised Claw Anchor 15kg
15Kg Galvanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Galvanised Claw Anchor 20kg
20Kg Glavanised Claw Anchor
The galvanised claw anchor is a copy of the popular Bruce anchor and provides excellent holding power in most types of seabed.
As there are no moving parts, the claw anchor is easily stowed on the bow roller or foredeck.
Very effective in a variety of seabeds - ideal for mud, sand and rocky bottoms
Remains stable under a wide range of tide and wind conditions
Stows...
Barton Traveller 2:1 Purchase Kit Size 1
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)
French Style Galvanised Anchor 2.0kg
High grade hot-dipped galvanised steel French style anchor that will bite into the seabed within seconds
Solid welded construction
Thin flukes with sharp edges: ensures quick digging even in the hardest sea beds.
Suitable for all sebed conditions
High holding force
2.0kg
L406mm x W185mm
Flag Antifouling Thinners - 1 Litre
Flag paints are currently undergoing a rebrand and product redesign. Please email for availability until all new products are in stock and available!!
Barton Traveller 2:1 Purchase Kit Size 2
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)
French Style Galvanised Anchor 3.5kg
High grade hot-dipped galvanised steel French style anchor that will bite into the seabed within seconds
Solid welded construction
Thin flukes with sharp edges: ensures quick digging even in the hardest sea beds.
Suitable for all sebed conditions
High holding force
3.5kg
L497mm x W219mm
Barton Traveller 4:1 Purchase Kit Size 1
Guide to choice of size:
Size 1 for yachts up to 8.5m (28.5ft)Size 2 for yachts up to 11.0m (36ft)






































































