Owatrol CIP Rust Inhibiting Primer

Owatrol Owatrol CIP Rust Inhibiting Primer

Item: 16-7029

MPN: 5-25004

Write the first review

£29.95
RRP £31.28

updown

Product Description

Owatrol CIP (Corrosive Inhibiting Primer) is a rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes.

It contains the anti-corrosive properties of Marine Oil which enables it to stabilise the surface by penetrating deep into the substrate, driving out excess moisture and air to form a solid stable layer.

CIP is easy to use and does not require sand or shot blasting first. It can be used on both new and rusted surfaces.

It will not dissolve or break down when even high solvent paints and finishes (urethane, epoxy, chlorinated rubber, synthetic, etc.) are applied to it and the pigmentation provides enhanced protection and perfect film-forming qualities.

With Owatrol’s Marine CIP, sand or shot-blasted surfaces do not require immediate priming as a light rust coating will not affect its performance or the final result.

Size: 750ml

Features:

  • Outstanding for high performance in severe conditions such as marine or tropical environments
  • Resisting corrosive fumes
  • Protecting ballast tanks of ships
  • Perfect protection where a high resistant paint or two-pack finish is necessary
  • Outstanding adherance on clean bright steel

Coverage: 15m2 per litre
Tools: Brush, Roller, Airless Sprayer
Suitable for: Exterior & Interior use
Clean up: White Spirit
Drying Time: 6 hours
Re-coating Time: 24-72 hours depending on finish/surface
Suitable Surfaces: Ferrous and non-ferrous metals

Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from £6.75

check delivery cost

You Can Also...

Get help or write a review...

ask a questionwrite a review