Raymarine

235 kHz frequency prevents mutual interference with other echo sounders on the vessel. 6m (20’) NMEA 2000 cable. DeviceNet connector. No holes to drill. Installation can be done while the boat is in the water. Recommended for solid fiberglass hulls. Epoxies to aluminium hulls under 0.38 mm (0.150”) thick. Easily adapts to deadrise angles up to 22°.

Designed for inboard or outboard boats, the RV-220 Bronze Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-220 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. 20° Element angle for Hull deadrises between 15° - 25°

Designed for inboard or outboard boats, the RV-412 stainless steel through hull transducer system lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-412 system is a 4-channel, Wide Spectrum CHIRP transducer system with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. 10° Element angle for Hull deadrises between 5° - 15°

RVM-400 series stainless steel all-in-one through hull transducer brings the power and clarity of RealVision MAX technology to inboard and outboard powerboats. The RVM-400 series transducers are compatible with the RVM1600 sonar module and Axiom 2 Pro RVM chartplotters. The RVM-412 is a port and starboard transducer pair designed for boats with 5° to 15° of deadrise. Each transducer element...

The all-in-one design of Element's HyperVision transducers make them compact and easy to install. Raymarine offers convenient transom mount and thru-hull options to fit any boat.

Choose the R509LM for additional coverage in shallow water.

Raymarine’s RV-200 Bronze All-In-One Through Hull Transducer is designed for inboard and outboard powerboats. The RV-200 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-200 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. 0° Element angle for Hull deadrises between 0° - 5°

Designed for inboard or outboard boats, the RV-312 Plastic Through Hull Transducer System lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. 10° Element angle for Hull deadrises between 5° - 15°

Raymarine’s RVM-100 all-in-one transom mount transducer is designed for Raymarine RealVision MAX compatible sonar modules, and RealVision MAX equipped chartplotters.

The RVM1600 for Axiom chartplotters takes multi-channel fish finder performance to new depths. The next generation of CHIRP DownVision, SideVision, 3D, and traditional CHIRP sonar, RealVision MAX fish finder technology delivers more power and life-like fish finder imagery.  

Speed performance has been taken to the next level with the ST900 Speed/Temperature sensor. Featuring the new Gen2 Paddlewheel, the ST900 outperforms all other paddlewheel sensors for responsive startup and linearity. Analog output for use with Raymarine instruments like i40, i50, iTC-5 and legacy systems.

Speed performance has been taken to the next level with the ST900 Speed/Temperature sensor. Featuring the new Gen2 Paddlewheel, the ST900 outperforms all other paddlewheel sensors for responsive startup and linearity. Analog output for use with Raymarine instruments like i40, i50, iTC-5 and legacy systems.

A retractable depth transducer with 6m cable for use with Raymarine Micronet wireless range.

TM258 Depth Temperature Transom Mount Transducer

Raymarine 2m STNG bare wires for nmea 0183.

3 Way SeaTalk 1 Junction Block

Raymarine Wind Transducers 50m mast cable and connector.

Raymarine Axiom/Element Power Cable 1.5m Straight with NMEA2000

SeaTalk ng Blanking Plug - Inserted into unused spur connector positions in 5-way connector and T Piece. Place blanking plug in unused SeaTalkNG Spur sockets to protect them. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. Spur cables connect individual SeaTalk ng products to the SeaTalk ng backbone. Cables and connectors are colour-coded for easy system identification and have quick connect (push-fit, twist-lock) waterproof (IPx6) plugs and sockets. Whether you are looking to expand your current SeaTalk ng system, update your electronics suite or completely refit, it couldn’t be easier with SeaTalk ng.

Raymarine Devicenet (M) to STng (F) Adaptor 90d.

Raymarine Devicenet Male to STNG Adaptor Cable

SeaTalk ng Adaptor Cable for E80 and E120 Classic Multifunction Displays

Pre-terminated SeaTalk Cable, for easy interlinking of SeaTalk instrument displays, autopilot displays, RL & C series displays and SeaTalk VHF's.

Terminators go at each end of the Backbone. This is ideal for the RS130. Two Terminators are required per system.