Rule 500 Fully Automatic Submersible Bilge Pump 12v

Rule Rule 500 Fully Automatic Submersible Bilge Pump 12v

Item: 8-7041


Write the first review

£88.08 £80.00



You may also need:
Plastic Skin Fitting with Stainless Steel Cap Straight Hose
90° Plastic Skin Fitting with Stainless Steel Cap Hose

Product Description

Rule 500 Fully Automatic Submersible Bilge Pump

Rule fully automatic 500 Gallon per hour submersible pump with computerised operation eliminating the need for a separate float switch. Once power is supplied, starting and stopping is completely automatic. 

The pump checks for water every 2 ½ minutes by turning on for a second and measuring load against the impeller. If water is present, the pump remains on until the water is removed. Thereafter the pump resumes its 2 ½ minute check cycle.

  • Fully automated bilge pump with computerised operation.
  • Tough plastic body with integral strainer.
  • Quick release strainer allows rapid cleaning.
  • Low amp draw conserves batteries.
    Checks for water every 2 1/2 minutes (Runs for 1/2 second)
    Consumes 0.20 amps per day
  • Built-in Thermal Cut-Off.
  • Check Valve included for Back Flow Prevention.
  • Vented body to prevent air locking.
  • Threaded port for easier installation and maintenance.
  • No Need for separate float switch, third wire for manual override.
  • Base not interchangeable with old range but can be fitted to existing screw holes.
  • 12vdc

Technical Specification

  • Connections: For 19mm (3/4') bore hose.
  • Dimensions: 107mm high, 64mm x 74mm.
  • Current Draw: 1.6(amps)
  • Fuse Size: 4 amp
  • Output: Up to 31 litres/minute (7 gallons/minute) at 12v, without check valve. Max. recommended discharge head 2m.
Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from £6.95

check delivery cost

You Can Also...

Get help or write a review...

ask a questionwrite a review

You may also like...

People who bought this also bought...