Search results for... Battery switch
Grid
List
Battery Master Switch
Suitable for one or two battery installations: to isolate or cluster the lighting and engine start circuits.
Capacity 150 A/h - 12 V.
Polycarbonate case, footprint diameter 134 mm, height 66 mm.
Easy surface mounting, supplied with instructions.
Blue Sea Systems Dual Circuit Plus Battery Switch 5511E
Blue Sea E-Series Dual Circuit Battery Switch
A high quality battery switch for craft with a dual battery installation. This switch has the ability to switch two isolated batteries to two isolated loads i.e. Starting battery to starter motor and house battery to domestic circuits. When the switch is set to the Combine position, both batteries are connected in parallel to the loads. Make before break...
Vetus Heavy Duty Battery Changeover Switch 175 amp Continuous
Vetus Heavy Duty Battery Changeover Switch
The famous VETUS battery selector switch is a sturdy rotary series switch. It enables battery usage and charging.
From the OFF position, in accordance with the switch pattern, battery 1 only, battery 1 plus battery 2 or battery 2 only can be switched on.
The switch enables usage and charging of the batteries individually and in parallel connection.
The...
Sterling Pro Bat Ultra Battery to Battery Charger
Sterling Battery to Battery Charger BB1230
Simply connect a B2B unit between the battery being charged, or an alternator, and the battery you wish to charge, for full 4-stage charging between 5-20 times faster than just a stand-alone alternator.
Very simple to install – no complex wiring required
9 Pre-set battery chemistry options including AGM, LiFePO4, Gel, flooded & sealed...
Digital Battery Test Switch Panel
LED Display. Measurable Voltage – 3v to 30v
Connects to two battery banks with selector switch for the display.
IP65
75.2mm wide
62.5mm high
53.5mm deep…
Spare Red Key for Battery Isolator Switch
Spare Red Key for Battery Isolator Switch
Universal handy spare key for battery isolator switch
Battery Isolator Switch
Battery Isolation Switch
Intended for isolating a single battery.
Can also be used for controling high current devices such as winches, windlasses, capstans etc.
Maximum Voltage: 24 Vdc
Maximum Surge Current: 500Amps for 10 seconds @ 12Vdc
Maximum continuous current: 100Amps/140Amps @ 12Vdc
Dimensions: 75mm x 60mm diameter
Terminal Stud Diameter: 10mm
Blue Sea Heavy Duty Battery Switch 4 Way 500A
HD BATTERY SWITCHES (Heavy Duty) Up to 600 Ampere continuous rating for large diesel engines.
Label with international legends
Tactile indicator conveys knob position by feel
Accepts up to 4/0 AWG (120mm2) battery cables
Case design allows surface or rear panel mounting
7/8" (22mm) stud length accepts multiple cable terminals
One-piece terminal stud design never loosens over time
M12 tin-plated...
BEP 701 Contour Battery Master Switch 275A ON/OFF
This switch offers a number of unique features, the highlight being the patented Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. The control knob can be removed by switching to an counterclockwise 45 degree position. This control knob also features an interchangeable labeling system allowing a full range of applications (Item # 713 or 715). Three...
Blue Sea Systems Mini Battery Selector Switch
BLUE SEA M-SERIES 4 POSITION BATTERY SWITCH
300 Ampere continuous rating for outboards and small gasoline or diesel engines.
Tin-plated copper studs for maximum conductivity and corrosion resistance
Studs accept 3⁄8" (M10) ring terminals
One-piece terminal stud design never loosens over time
7⁄8" (22.22mm) stud length accepts multiple cable terminals
Isolating cover with three snap-in side...
Fullriver Battery DC Series Battery 12V 55Ah Battery (DC55-12)
When it comes to the Fullriver DC Series 12V 55Ah Battery (DC55-12), the difference is in the detail. Battery construction, plate chemistry, and craftsmanship align to provide the longest life in the most demanding applications. Benefitting from greater reserve capacity and maximum life cycles, this battery thrives in providing deep cycling power for any of your applications.
Fullriver Battery DC Series Battery 12V 85Ah Battery (DC85-12)
When it comes to the Fullriver DC Series 12V 85Ah Battery (DC85-12), the difference is in the detail. Battery construction, plate chemistry, and craftsmanship align to provide the longest life in the most demanding applications. Benefitting from greater reserve capacity and maximum life cycles, this battery thrives in providing deep cycling power for any of your applications.
Fullriver Battery DC Series Battery 12V 115Ah Battery (DC115-12)
When it comes to the Fullriver DC Series 12V 115Ah Battery (DC115-12), the difference is in the detail. Battery construction, plate chemistry, and craftsmanship align to provide the longest life in the most demanding applications. Benefitting from greater reserve capacity and maximum life cycles, this battery thrives in providing deep cycling power for any of your applications.
Fullriver Battery DC Series Battery 12V 105Ah Battery (DC105-12)
When it comes to the Fullriver DC Series 12V 105Ah Battery (DC105-12), the difference is in the detail. Battery construction, plate chemistry, and craftsmanship align to provide the longest life in the most demanding applications. Benefitting from greater reserve capacity and maximum life cycles, this battery thrives in providing deep cycling power for any of your applications.
Fullriver Battery DC Series Battery 12V 90Ah Battery (DC90-12)
When it comes to the Fullriver DC Series 12V 90Ah Battery (DC90-12), the difference is in the detail. Battery construction, plate chemistry, and craftsmanship align to provide the longest life in the most demanding applications. Benefitting from greater reserve capacity and maximum life cycles, this battery thrives in providing deep cycling power for any of your applications.
Fullriver Battery DC Series Battery 12V 150Ah Battery (DC150-12)
When it comes to the Fullriver DC Series 12V 150Ah Battery (DC150-12), the difference is in the detail. Battery construction, plate chemistry, and craftsmanship align to provide the longest life in the most demanding applications. Benefitting from greater reserve capacity and maximum life cycles, this battery thrives in providing deep cycling power for any of your applications.
Rule Super Switch Bilge Pump Float Switch
Rule Super Switch Float Switch
Dimensions: 105mm long, 40mm wide, 110mm high (at max.lift)
Maximum Current: 20 amp
For automatic on/off bilge pump control.
Switch design prevents rapid on/off cycling.
Mercury Free
Designed for use with higher capacity pumps 1500gph and above
12-24-32vdc
Seaflo Alarm Switch Panel
Alarm Switch Panel Only
Battery Isolator Switch c/w Protective Cap
Battery Isolation Switch with Protective Cap
Intended for isolating a single battery.
Can also be used for controling high current devices such as winches, windlasses, capstans etc.
Maximum Voltage: 24 Vdc
Maximum Surge Current: 500Amps for 10 seconds @ 12Vdc
Maximum continuous current: 100Amps/140Amps @ 12Vdc
Dimensions: 75mm x 60mm diameter
Terminal Stud Diameter: 10mm
Whale BE9003 Electric Field Sensor Switch 12/24V (20 amp)
• Electric field sensor automatically senses water levels and switches on the bilge pumps
• Nylon material - withstands high temperatures
• Automatically switches on when 51mm (2") of water is sensed and turns off when water drops below 13mm (½")
Waterproof Toggle switch
Toggle Switch
On/Off panel mount toggle switch with waterproof cover.
Mounting aperture 12mm
12v 15a
Spade Terminal Connections
BEP 701-MD Remote Operated Battery Switch, 275A Cont
The MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters.
Remote operation
Battery switch can...
Victron 20A 24V DC to 12V DC automatic multi-stage intelligent battery-to-battery charger fo
DC to DC battery charger and converter for fast charging of a 12V battery / battery bank from a 24V battery / battery bank with its own energy source or converting a DC input to a stable DC output at a set voltage. Featuring Bluetooth connectivity for monitoring and changing settings from your mobile device. Galvanically isolated to prevent ground leakage currents.
Victron Orion XS 50A 12V DC to 12V DC automatic multi-stage intelligent battery-to-battery c
DC to DC battery charger and converter for fast charging of a 12V battery / battery bank from another 12V battery / battery bank with its own energy source or converting a DC input to a stable DC output at a set voltage. Featuring Bluetooth connectivity for monitoring and changing settings from your mobile device.
Blue Sea Systems E-Series Single Circuit ON/OFF Battery Switch
Blue Sea E-SERIES BATTERY SWITCHES
350 Ampere continuous rating for inboard petrol and diesel engines.
Tin-plated copper studs for maximum conductivity and corrosion resistance
Studs accept 3⁄8" (M10) ring terminals
7⁄8" (22mm) stud length accepts multiple cable terminals
One-piece terminal stud design never loosens over time
Case design allows surface or rear panel mounting options
Label...
Rule 3 Way Rocker Switch Bilge Pump Panel 12v
Model 43 Rule 12v Rocker Switch
3-Way Lighted Rocker Panel Switch Controls any pump equipped with an automatic float switch.
This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic- off- or manual) with the Rule 'fail-safe' spring return to 'off' from the 'manual' position.
Dimensions:...
Talamex Engine Cut Out / Kill Switch Inboard/Outboards
Cut Out Switch
So called dead mans button. Safety switch for use on speedboats.
Marine Battery Box Black upto 80A/h 340x230x250mm
Plastic Battery Box
• External dimensions (LxWxH): 340x230x250mm
• Internal dimensions / Maximum battery size (LxWxH) = 280x195x230mm
• Designed for batteries up to 280mm long (of group sizes 24, 25, 34, 35, among others)
• Mounting equipment: Includes durable hold-down fastening strap and foot clamps that secure the strap onto the supporting surface (screws not included)
•...
Battery Box Standard Red 270x195x200mm
Plastic Battery Box
Supplied with securing strap and essential to avoid spillages in to the boat.
Size: L270 x W195 x H200 mm
Battery Terminals M8 Stud & Wing Nut
Battery Terminal with M8 stud post and wing nut.
Sold in pairs (ie. 1 x +'ve, 1 x -'ve)
Battery Terminals Screw fixing up to 40mm² Cable
Battery Terminal screw fixing for cable up to 40mm².
Sold in pairs (ie. 1 x +ve, 1 x -ve)
Oceanflex Tinned Battery Cable 50mm² 1 AWG 345 Amps
Oceanflex flexible PVC electrical cable, suitable for use as battery cable or starter cable in marine and automotive applications. The cable features a tinned multi strand copper conductor with a red PVC insulation to represent a positive electrical connection. Tinned copper offers excellent corrosion resistance to make this cable particularly suitable in marine environments, while the PVC outer sheath...
Blue Sea Systems E-Series Selector Battery Switch
Blue Sea E-Series 4 Position Battery Switch
Select either battery bank or both plus an off position, 350 Ampere continuous rating for inboard petrol and diesel engines.
Tin-plated copper studs for maximum conductivity and corrosion resistance
Studs accept 3⁄8" (M10) ring terminals
7⁄8" (22mm) stud length accepts multiple cable terminals
One-piece terminal stud design never loosens over...
Rule 35A Rule-a-Matic Bilge Pump Float Switch
Rule Model 35A Float Switch
Dimensions: 105mm long, 40mm wide, 110mm high (at max. lift)
Maximum Current: 14 amp
For automatic on/off bilge pump control.
Switch design prevents rapid on/off cycling.
Rule 3 Way Rocker Switch Bilge Pump Panel 12v Model 41
Rule 3-Way Panel Lighted Switch Model No 41
Controls any pump equipped with an automatic float switch. Toggle has three positions (automatic, off, or manual) and has a 'fail safe' spring return to 'off' from the 'manual' position. Panel is black stainless steel and has red indicator light and fuse holder.
Fuse Not included
Toggle Switch 2 Position (on-off)
Thermo Plastic Toggle Switch 12v DC - Without Illumination
2 Position (on-off) dash mount toggle switch
15A 12v - 10A 24v
Whale WU7207 Inline Pressure Switch
Whale WU7207 Pressure Switch
Adjustable cut in / cut out pressure setting
Suitable for installation into 12mm Whale Quick Connect or 1/2" flexible hose systems
Controls the pump - turning it on and off by sensing changes in water system pressure
Recommended for use with Whale submersible and in-line booster pumps
Vetus Rotary Windscreen Wiper Switch
Three-position switch (off,1,2) for one wiper motor. Type HDMSW, for two-speed wiper motors.
Suitable for wiper motors RWS, DIN and HDMC.
Not suitable for model ORW.
Max. switching current:
20A Max.
Panel thickness:7 mm
Rule 40A Rule-a-Matic Plus Float Switch
Rule Model 40A Rule-a-matic Plus Float Switch
Dimensions: 120mm long, 60mm wide, 90mm high.
Maximum Current: 20 amp
For automatic on/off bilge pump control.
Fully integrated, impact resistant cover.
High abrasion resistant wire.
Manual test feature.
Mercury Free
Quick Windlass Deck Foot Switch
Low profile deck footswitches for convenient raising and lowering of the Anchor/Chain. Available with either Black or White casing with coloured Red/Grey safety cover to prevent accidental push-button operation.
Black Case: Up/Down
White Case: Up/Down
Compact Size: 77 x 85mm
Waveline Universal Boat Kill Switch Keys with Lanyard
Key universal lanyard,
Features internal core, meets RYA specification,
Coiled lanyard
Fits: Johnson, Evinrude, Mercury, Yamaha, Hidea, Suzuki & Honda
Mastervolt Easycharge 12v 10amp Battery Charger
Mastervolt 12v 10amp Battery Charger
The Mastervolt EasyCharge 10amp fixed battery charger designed to be highly efficient and simple to use, accepting a wide range of voltage inputs to be suitable for round the world use. It is built to IP68 waterproofing standards, and is fully salt, shock and vibration tested. The charger can be used in series or parallel connections to provide higher voltage...
Nasa BM1 Battery Monitor
Reliable and economical, these have proved to be our best selling range of boat instruments over many years. The outstanding Nasa Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case.
The Nasa BM-1 is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 600 Amp hours. The BM-1 is supplied complete...
Oceanflex Tinned Battery Cable 16mm² 6AWG
16mm/sq, tinned battery cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
OceanFlex Tinned Battery Cable 35mm² 2AWG
35mm/sq, tinned battery cable designed to withstand the harsh marine environment, available in a range of other sizes and for most applications.
Sold per mtr
Technical Specifications
Tinned copper conductors provide excellent resistance to corrosion
Good resistance to petrol, diesel, lubricating oils and diluted acid
Hard grade PVC insulation offers good resistance to abrasion and cut though
Suitable...
TBS Electronics DCM Remote Battery Switch (12V/500A)
The DCM Remote Battery Switch (12V/500A) is a smart high-current magnetic latching contactor, that can handle continuous DC currents of up to 500Amps. The contactor can easily be installed in an engine room or battery compartment while being controlled from a more convenient location by a small panel-mounted switch.
TBS Electronics DCM Remote Battery Switch (24V/500A)
The DCM Remote Battery Switch (24V/500A) is a smart high-current magnetic latching contactor, that can handle continuous DC currents of up to 500Amps. The contactor can easily be installed in an engine room or battery compartment while being controlled from a more convenient location by a small panel-mounted switch.
EGIS Mobile Electric XD Flex 2 - Remote Battery Switch/ACR w/Knob - Tinned Wires
The XD Flex 2 - Remote Battery Switch/ACR w/Knob features include:
- Compact 35-75% smaller installation footprint.
- Eliminates dead start batteries by sharing charging on either of two batteries and isolating batteries when no charge sources are present.
- Supports single/multiple engine installations with dual start/engine isolation inputs.