Best Selling

The standards-based ProSAFE Gigabit switches senses and adjusts for network speed and cabling type automatically. Easily integrates into your existing Ethernet network - no matter if it is running at 10/100Mbps or Gigabit speed. Simple set up with no software or configuration needed. Front panel LEDs keep you informed of power status, link speed and link activities. Both GS105 and GS108 support the latest Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable (<100m) is used. Energy savings lead directly to cost savings in operation.

The SC33 Satellite Compass provides highly accurate attitude information for navigation equipment such as Radar, Plotter, Autopilot, Fish Finder and Sonar. With its compact GNSS antenna and built-in processor, it can be used for a wide variety of applications on any type of vessel. This all-in-one system delivers incredibly accurate heading and roll & pitch information as well as heaving information, GPS position, SOG (Speed Over Ground), COG (Course Over Ground) and ROT (Rate Of Turn) data.

SC-130 features a Tri-sensor antenna that provides a high system accuracy for the heading of your vessel   Provides highly accurate heading data for Autopilot, Radar, ARPA, Scanning Sonar, Current Indicator, Chart Plotter, ECDIS and Autopilot 0.25° Ideal for medium to large vessels navigating in crowded ports and making precise maneuvers, such as berthing.

Speaker for Furuno FM-4800/4850#html-body [data-pb-style=""6390725665B81""]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px 0px 10px; padding: 10px;}#html-body [data-pb-style=""6390725665B8A""]{border-style:...

Bottom type is a key point for fishing. Bottom species usually move according to the bottom type (mud, gravel, sand or rock). By connecting an existing echo sounder to TZ Professional, It will be able to record not only the depth (3D Bathymetric charts) but also the hardness! This will allow the user to deduce the bottom type! Note: Software Module Only, Requires TZ Profesional & PBG Software Module

Raster / Vector High Resolution Satellite Photos High Resolution Tidal Currents Heightfield Bathymetry Charts Sedimentary Charts Altimetry TIMEZERO and Furuno NavNet(3D & TZT) utilize MapMedia .mm3d altimetry to realistically represent the shoreline. The advantages are numerous such as the instantaneous identification of port entries or the identification of specific shoreline features....

Requires an existing TZ Professional license. Please call with your System ID Code. How to find your System ID Code: Press MENU > INITIAL SETUP > Scroll to the bottom of the list and turn CHART MASTER to ON. Just under CHART MASTER you see System ID Code Note: If more than one unit is going to be in the system - only one unit should be set as CHART MASTER.

Directly connected to sounder and positioning system, the PBG Module allows TIMEZERO to collect and record in real time depth information transmitted, enabling the creation and update of bathymetric databases with pinpoint accuracy. With a single click, TZ PBG Module will activate to give breathtaking real-time 2D and 3D images of the seabed. It's as easy as that. Note: Software Module Only, Requires TZ Profesional

The Voyage Data Recorder Module, that comes as an option, offers the possibility to save all the information received from the connected sensors to TZ Professional (GPS, radar and AIS/ARPA). It is particularly useful in the case of an incident as it allows one to look back at all the available information relative to the surrounding environment of the boat at that given date and time. Note: Software Module Only, Requires TZ Profesional

The Weather Routing module combines with both TZ Navigator and TZ Professional to provide a route that will optimize the time taken to travel on a sailboat using the weather forecast information and the boat's polars. Note: Software Module Only, Requires TZ Navigator or TZ Profesional

Raster / Vector High Resolution Satellite Photos High Resolution Tidal Currents Heightfield Bathymetry Charts Sedimentary Charts Altimetry TIMEZERO and Furuno NavNet(3D & TZT) utilize MapMedia .mm3d altimetry to realistically represent the shoreline. The advantages are numerous such as the instantaneous identification of port entries or the identification of specific shoreline...

The 165T-TM54 is a multi-beam transducer for the DFF3D that affords a 120 degree port-starboard view of the underwater world. A built-in motion sensor stabilizes the display to give clear and stable images.

Combination of PVC and PU mesh. Jelly bead edge protectors. Easy to assemble with the hook and loop system.

Connect a Garmin GT30 transom mount scanning transducer and a Garmin GT8HW-IH, GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional transducer to a compatible ECHOMAP Plus™, echoMAP CHIRP chartplotter/sonar combo or a GPSMAP 10X2xsv/12X2xsv chartplotter.

Garmin Vehicle Power Cable mini USB.

Power your compatible chartplotter or fishfinder with this 12 V adapter kit. The kit includes a 4-pin power cable and 12 V vehicle power adapter.

Power or network your chartplotter with this power/data cable.

Mount any additional ECHOMAP or GPSMAP; on your boat with this second mounting station. Also includes a wiring harness to power your compatible device and connect to an optional NMEA 0183 network.

This dual beam transducer replaces the one included with your echo series fishfinder. A 500 W 4-pin transducer; an operating frequency of 77 to 200 kHz; a beamwidth of 45 to 15 degrees; and mounts on a 0 to 70 degree transom. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Power your compatible ECHOMAP Ultra chartplotter/sounder combo with this 6 foot (2 metre) power/data cable. Includes NMEA 0183 input/output.

Connect a 4-pin transducer to a 12-pin sonar port on your compatible marine device with this adapter cable.

This plastic transom mount can be used to replace the dual frequency transducers included with many Garmin units.

Connect your GMI™ 20 or GHC™ 20 to a NMEA 0183 device with this 7-pin power/data cable. Features 90-degree connector for installation in tight spaces or flush mounting. .

 8 Pin heavy duty extension cable for the GT12M-THF or GT15M-THF Transducers.