Best Selling

Raymarine Replacement Quantum Radome Top - Black This the a replacement top for a quantum radar only in black.

The RotaVecta wind transducer supplied with 20m cable is compatible with iTC-5,ST40, i40, ST60, i60 instruments. Ideal for small sail bats and power boats.

Marine Grade Aluminium - White 150mm (6") High Aft Leaning Model Fits Garmin, Raymarine, Simrad, & Lowrance Radar GPS, VHF & Navlight Compatible 150mm (6”) high and constructed from the best marine-grade aluminium, designed to fit the most up to date radars from Garmin, Lowrance, Raymarine and Simrad. Pre-drilled mounting holes allow the radar to fasten straight...

SeaTalk ng Extender - Connects two backbone cables. Used for extending blue SeaTalk ng Backbone Cables. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s...

This cable has an NMEA 2000 micro-C female connector on one end, to connect to the NMEA2000 device and a SeatalkNG white spur connector to plug into a T on the SeatalkNG backbone. For example, if you want to connect a LCJ Baroplug to a Raymarine system, this is what you would use.

Soft protective case for the Raymarine Micro Compass

Raymarine CPT-DV / DVS Transducer Transom Mounting Kit A replacement transom mount bracket for the Raymarine CPT-DV & CPT-DVS transducers that are used by the Raymarine Dragonfly range.

Spur to Stripped End Cable Individual devices connect to the SeaTalkNG backbone by spur cables that run to T-pieces on the backbone. Only contains 5 cores - the Yellow Seatalk1 is not included.

SEATALK 1 to SeaTalkNG Converter Kit. The SEATALK 1 to SeaTalkNG converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkNG data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The SeaTalk to SeaTalkNG Converter kit is a compact solution that connects in-line with the SeaTalkNG instrument...

PLUS TILLER PILOT 12V PLUG

St30/40/60 Power Cord Flat. Part number D229.

Replacement rear cover for Raymarine Autopilot ST4000 MK2 Wheel Drive.

Belt pulley kit for Raymarine ST4000 Mk2 Wheel Pilot

Poke Clamp Kit for Autohelm 4000 Wheel Pilot or ST4000 Wheel Pilot. Wheel is black. Wheel is black Includes 2x M4 x 12 Socket cap screws 1x Packing Piece 1x Clamp for 9.5mm (3/8") Dia Spoke (A) 1x Clamp for 12.5mm (1/2") Dia Spoke (B) 1x Clamp for 16.0mm (5/8") Dia Spoke (C) 1x Clamp for 19mm (3/4") Dia Spoke (D) 1x Clamp for 22mm (7/8") Dia Spoke (E) 1x Clamp for 25.4mm...

Raymarine STng (M) to Devicenet (F) Adaptor.

Connect SeaTalkng and NMEA2000 backbones together with these backbone cable adapters. Female STNG to Female DeviceNet / NMEA 2000 Version (Female to Male) Version also available, see product: 705-A80674

SeaTalkNG is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to cut or splice cables. 

SeaTalk ng Power cable - A cable to connect a SeaTalk ng backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically...

SPX course computer spur cable for connection to the SeaTalkNG backbone.

The ultimate tactical race compass and wind shift indicator. Its two-tier display shows your heading, how far you're above or below the mean course, and how much you're being headed or lifted. It will enable you to quickly and easily establish the favored end of the start line, and will help you sail the shortest distance to the windward mark. Comes with T121 Hull Transmitter, T910 Speed Depth...

Only 95g (0.21lbs). Heel and pitch angle 30°. Calibration at the Displays.

T121 Hull Transmitter. For multihulls, advanced Micronet technology allows your displays to use wind direction to automatically determine which hull transducer supplies the information you need. No switches required. Note: you need two hull transmitters for this configuration. Easy Installation - A typical installation can be done in just a few hours, with your rig in place and your boat still in...

Easy Installation - A typical installation can be done in just a few hours, with your rig in place and your boat still in the water. And there's no need for holes in the bulkhead or wires down the mast. Self-powering - Solar powered with integrated lithium batteries that power the unit for life. Power consumption is so efficient that units can run autonomously for up to 300 hours. Lightweight - The elimination of wires in the mast not only reduces spar weight but also lowers the boat's centre of gravity, giving significant and immediate performance advantage. Portability - Using clip-in cradles, your display can be placed anywhere on your boat, allowing you to view the information where and when you need it. Waterproof - Sealed for life and completely waterproof (submersible to 10m). This also means no condensation. Raymarine Wireless for Racing - Receive and display precise data wirelessly from Hull and Wind transmitters, including polar data, true wind speed and angle, VMG and compass heading.

Tacktick T122 Micronet Wireless NMEA Interface. Enables sailors to integrate other NMEA capable marine electronics into any of the Tacktick Micronet instrument range. The Tacktick Wireless NMEA Interface (2 inputs/1 output) accepts data from autopilots, GPS, chartplotters, PDAs and other on board instruments and transmits it wirelessly to Tacktick Micronet displays. When plugged into an on-board...