Blue Sea

The Switch WD ToggleSPST (ON)-OFF-(ON) is specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck Panels - When mounted with a WeatherDeck Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes - Nickel-plated brass and phenolic non-corrosive construction

The Switch WD ToggleSPST ON-OFF is specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck Panels - When mounted with a WeatherDeck Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes - Nickel-plated brass and phenolic non-corrosive construction

The Terminal Block/Ind 4circ 30A features include: - Closed back design completely insulates power from the mounting surface - Each screw pair is one isolated circuit - Jumpers allow creation of common circuits

The Terminal Block/Ind 8circ 20A features include: - Closed back design completely insulates power from the mounting surface - Each screw pair is one isolated circuit - Jumpers allow creation of common circuits

The TermSm FeedThrough 5/16-18 Stud Red eliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads - Perfect for passing high current cables through hulls, decks and bulkheads - Large cables passed through holes are subject to chafing even when protective grommeting is used. Terminal Feed Through Connectors eliminate chafing and provide excellent strain relief for the cable - Large size terminals have a mounting face that can be gasketed or bedded to provide a water tight installation - Rated IP66 - withstands water from heavy seas

Blue Sea Systems 12 Circuit ST Blade Fuse Block Blue Sea Systems 6 circuit blade fuse block with negative bus and clear polycarbonate insulating cover. The cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems' Small Format Labels for circuit...

Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit 150 Ampere bus allows small wire connections at high amperage cable connections. Connects high amperage cables securely. Stud dimensions: 3/8" x 3/4". Base Material is Black Nylon 8231 GHS

The Solenoid M-Series 65A 12/24V ACR is designed to manage the charging current from alternators up to 65 Amps found on most outboards and many inboard engines. Start Isolation (SI) protects sensitive electronics by temporarily isolating house loads from the engine circuit during engine cranking, protecting the house circuit from voltage sags and spikes.