Electrical: Page 12

The Switch Battery M ON/OFF w/Knob switches a single battery to a single load group. It also includes: - Ignition protection - safe for installation aboard gasoline powered boats - Case design allows surface, front panel, or rear panel mounting - Isolating cover with snap-on sections protects rear contacts

The Switch Battery M ON/OFF with Locking Key provides 300 Amps continuous rating for outboards and small gasoline or diesel engines. It also includes: - Tin-plated copper studs for maximum conductivity and corrosion resistance - Studs accept 3/8" (M10) ring terminals - 7/8" (22 mm) stud length accepts multiple cable terminals - Blue Sea Systems one-piece terminal stud design never loosens over time - One-piece stainless flange nuts ensure safe and secure connections - Isolating cover protects rear contacts - Breakout tabs allow wire access in any direction

The Switch Battery M Selector 3 Pos switches a single battery to a single load group. It also includes: - Ignition protection - safe for installation aboard gasoline powered boats - Case design allows surface or rear panel mounting

The Switch Battery M Selector Blk switches isolated battery banks to all loads or combines battery banks to all loads. It also includes: - Make before break contact design allows switching between battery banks without power interruption

The Switch Contura DPDT(ON)-OFF-ON Blk offers vibration, shock, thermoshock, moisture and salt spray resistance. As well it is specially manufactured for mounting in Blue Sea Systems" water resistant panels. It's other features include: - Ignition Protectection - Safe for installation aboard gasoline powered boats - Meets UL1500 and ISO 8846 ignition protection requirements

The Switch Contura SPDT (ON)-OFF-ON Blk offers vibration, shock, thermoshock, moisture and salt spray resistance. As well it is specially manufactured for mounting in Blue Sea Systems" water resistant panels. It's other features include: - Ignition Protectection - Safe for installation aboard gasoline powered boats - Meets UL1500 and ISO 8846 ignition protection requirements

The Switch Contura SPDT (ON)OFF(ON) RG provides vibration, shock, thermoshock, moisture and salt spray resistance.

The Switch Contura SPDT ON-OFF-ON offers vibration, shock, thermoshock, moisture and salt spray resistance. As well it is specially manufactured for mounting in Blue Sea Systems" water resistant panels. It's other features include: - Ignition Protectection - Safe for installation aboard gasoline powered boats - Meets UL1500 and ISO 8846 ignition protection requirements

The Switch Contura SPDT ON-OFF-ON RG provides vibration, shock, thermoshock, moisture and salt spray resistance.

The Switch Contura SPST OFF-(ON) offers vibration, shock, thermoshock, moisture and salt spray resistance. As well it is specially manufactured for mounting in Blue Sea Systems" water resistant panels. It's other features include: - Ignition Protectection - Safe for installation aboard gasoline powered boats - Meets UL1500 and ISO 8846 ignition protection requirements

The Switch Contura SPST OFF-ON Blk offers vibration, shock, thermoshock, moisture and salt spray resistance. As well it is specially manufactured for mounting in Blue Sea Systems" water resistant panels. It's other features include: - Ignition Protectection - Safe for installation aboard gasoline powered boats - Meets UL1500 and ISO 8846 ignition protection requirements

The Switch WD ToggleSPST (ON)-OFF is specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck Panels - When mounted with a WeatherDeck Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes - Nickel-plated brass and phenolic non-corrosive construction

The Switch WD ToggleSPST (ON)-OFF-ON is specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck Panels - When mounted with a WeatherDeck Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes - Nickel-plated brass and phenolic non-corrosive construction

The Switch WD ToggleSPST ON-OFF-ON is specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck Panels - When mounted with a WeatherDeck Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes - Nickel-plated brass and phenolic non-corrosive construction

The Terminal Block/Ind 6circ 30A features include: - Closed back design completely insulates power from the mounting surface - Each screw pair is one isolated circuit - Jumpers allow creation of common circuits

The Terminal Block/Ind 8circ 30A features include: - Closed back design completely insulates power from the mounting surface - Each screw pair is one isolated circuit - Jumpers allow creation of common circuits

The 12 Pos Sealed Bus Bar features include: - 200 Amp total current, twelve low amp ground input circuits, one high amp M6 terminal - Sealed solution for improved harsh environment protection - Dual mounting orientations deliver flexible install options

The Automatic Charging Relay Plus - Dual Battery - 160 Amp includes: - Ultra-Low Power Draw Compare to typical ACRs (7-10 mA) vs 7610 ACR @ 1.3 mA, will not deplete batteries even after extended electrical system downtime. - Simple & Robust Installation: Integrated sealed plug eliminates corrosion, includes Deutsch/Amphenol DTM connector harness - Start Assist input option to ensure maximum cranking amps available by allowing manually connecting of batteries via remote switch. - Bullet-proof Construction: Sealed unit, stainless steel hardware, high temperature materials allow mounting anywhere. Integrated thermal overload shutdown protection. - Additional Low Amp Output can be used to report device status remotely, or drive a secondary relay for charge to a battery bank without a charge source (see example)

The Automatic Charging Relay Plus - Triple Battery - 2x 80 Amp includes: - Ultra-Low Power Draw Compare to typical ACRs (7-10 mA) vs 7610 ACR @ 1.3 mA, will not deplete batteries even after extended electrical system downtime. - Optional Under-Voltage Lock-Out provides ability to prevent either ACR from connecting a good battery under charge with a battery that has a shorted cell, ensuring a single battery or bank will not deplete the other system batteries. - Start/Engine Isolation and Start Assist functions are optional for each relay; allowing protection of sensitive electronics from engine starting events or the option to boost cranking effectiveness. - Adjustable Off-Voltage for Auxiliary Battery Priority provides ability to share start battery energy for auxiliary without risking engine starting ability. - Additional Low Amp Output can be used to report device status remotely, or drive a secondary relay for charge to a battery bank without a charge source

The Busbar, Offset, 3/16", Copper, Tin Plated reduce installation space via robust bus bar that closely connects TH series relays to CT series fuse blocks.

The Contactor, 100A, 12V includes: - Ignition Protection safe for installation in closed compartments with potential explosive gases - High Electrical Switching Endurance delivers 6,000 cycles at 100A / 350V, 100,000 cycles at 100A / 14V - High Interrupt Current Capability safely able to open in a locked starter situation (up to 1,250 A @ 14 Vdc) - Bullet-proof Construction: Sealed device, high temp materials for engine compartment applications, and stainless self-locking hardware.

The Contactor, 100A, 24V includes: - Ignition Protection safe for installation in closed compartments with potential explosive gases - High Electrical Switching Endurance delivers 6,000 cycles at 100A / 350V, 100,000 cycles at 100A / 14V - High Interrupt Current Capability safely able to open in a locked starter situation (up to 1,250 A @ 14 Vdc) - Bullet-proof Construction: Sealed device, high temp materials for engine compartment applications, and stainless self-locking hardware.

The Contactor, 250A, 12/24 V includes: - Ignition Protection safe for installation in closed compartments with potential explosive gases - High Electrical Switching Endurance delivers 6,000 cycles at 100A / 350V, 100,000 cycles at 100A / 14V - High Interrupt Current Capability safely able to open in a locked starter situation (up to 1,250 A @ 14 Vdc) - Bullet-proof Construction: Sealed device, high temp materials for engine compartment applications, and stainless self-locking hardware.

The Dual Battery Charge Manager (TDR+ACR) includes: - One Product Handles Two Functions for both auxiliary battery charge management and timed load shedding for add-on circuits. - Prevents add-on equipment from draining batteries / maximizes and extends operational readiness. - Protects sensitive on-board electronics via optional under/over voltage shutdown and start event isolation.