Switch Panels & Distribution: Page 2

The Add-A-Battery includes a Dual Circuit Plus™ Battery Switch and an Automatic Charging Relay. These components simplify switching and automate charging, so that all you have to do is turn the battery switch ON when you arrive and OFF when you leave. Dual Circuit Plus™ Battery Switch Simplifies switching Isolates engine and house circuits Combines batteries for emergency starting Tin-plated...

Plastic Battery Box ?• External dimensions (LxWxH) = 470x225x- 255mm • Internal dimensions / Maximum battery size (LxWxH) = 385x175x225mm • Can hold battery up to 385mm long, of various group sizes (e.g. 27, 49, 93 and others) • Customisable length: Includes separator that divides the box into partitions, ranging from 50 to 330mm long • Mounting equipment: Includes durable...

Combatting the problems commonly associated with conventional amp-hour based battery monitors, SmartGauge 12/24V is renowned as the World's most accurate battery monitor, as well as the easiest to install and use.

Spare Red Key for Battery Isolator Switch Universal handy spare key for battery isolator switch

Vetus Heavy Duty Battery Changeover Switch The famous VETUS battery selector switch is a sturdy rotary series switch. It enables battery usage and charging. From the OFF position, in accordance with the switch pattern, battery 1 only, battery 1 plus battery 2 or battery 2 only can be switched on. The switch enables usage and charging of the batteries individually and in parallel connection. The...

Blue Sea M-Series Battery Switches 300 Ampere continuous rating for outboards and small gasoline or diesel engines. Tin-plated copper studs for maximum conductivity and corrosion resistance Studs accept 3⁄8" (M10) ring terminals One-piece terminal stud design never loosens over time 7⁄8" (22.22mm) stud length accepts multiple cable terminals Isolating cover with three snap-in side pieces...

Blue Sea E-Series 4 Position Battery Switch Select either battery bank or both plus an off position, 350 Ampere continuous rating for inboard petrol and diesel engines. Tin-plated copper studs for maximum conductivity and corrosion resistance Studs accept 3⁄8" (M10) ring terminals 7⁄8" (22mm) stud length accepts multiple cable terminals One-piece terminal stud design never loosens over...

Blue Sea E-SERIES BATTERY SWITCHES 350 Ampere continuous rating for inboard petrol and diesel engines. Tin-plated copper studs for maximum conductivity and corrosion resistance Studs accept 3⁄8" (M10) ring terminals 7⁄8" (22mm) stud length accepts multiple cable terminals One-piece terminal stud design never loosens over time Case design allows surface or rear panel mounting options Label...

Plastic Battery Box Supplied with securing strap and essential to avoid spillages in to the boat. Size: L270 x W195 x H200 mm

Provides medium duty circuit protection for 25 to 150 Amp loads when switching and circuit protection are both required Trip-free - cannot be held closed after trip Visible reset lever shows open condition Drop-in replacement for 185-Series Circuit Breakers  Regulatory CE marked Meets SAE J1171 external ignition protection requirements, †AIC ratings achieved using SAE J1625 IP67 - protected against immersion up to 1 meter for 30 minutes

Blue Sea 10 Gang Busbar The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits. Rating: 130 Amps AC / 150 Amps DC Max Voltage Rating: 300V AC / 48V DC Bus Material: Tin-Plated Copper Base Material: Reinforced Polycarbonate

The Blue Sea Systems 12/24VDC Dual USB Charger 5V 2.1A Socket is made with corrosion resistant materials which ensure a solid contact and low voltage drop. It's features include: - Fits in same mounting hole as a traditional 12 Volt outlet - Protective dust cap with tether keeps dust and spray from shortening the life of the charger - Potted for the harsh marine environment

The Blue Sea Systems 12VDC Plug features include: - Moisture proof sealing ring around the shaft to keep out spray and make it seat firmly in the outlet - "ON" indicating LED - Strain relief - Built-in 10 Amp fuse - Designed to withstand the rigors of wet environments and constant vibration - Large contact surfaces for good electrical connection - Twist lock system - plug locks securely into socket - Internal strain relief and cord seal - Nickel plated copper alloy used for all current carrying components - Front panel, rear panel, or surface mount

The Blue Sea Systems 12VDC Plug with Single Extension Socket features include: - Plug has a moisture proof sealing ring around the shaft to keep out spray and make it seat firmly in the outlet - Plug features an"ON" indicating LED, moisture proof sealing ring, strain relief, and a built-in 10 Amp fuse - Socket features a watertight cap, easy installation and interlocks with the plug - Heavy duty 18 gauge wire - Cord reaches up to 6 feet - Designed to withstand the rigors of wet environments and constant vibration - Large contact surfaces for good electrical connection - Twist lock system - plug locks securely into socket - Internal strain relief and cord seal - Nickel plated copper alloy used for all current carrying components - Front panel, rear panel, or surface mount

The Blue Sea Systems CableClam .825 in provides a waterproof pass-through for antenna cables without requiring removal of the factory installed connector - Perfect for antenna installation - Waterproof co-axial installation without removing connectors - Save the expense of removing and replacing connectors - Avoid poor connections from removing factory connectors - For use above the waterline only

The Blue Sea Systems Fuse ATC easyID 10A (pack of 2) Contains 2 of the 10A easyID illuminated ATC blade fuses which uses Light Emitting Diode (LED) technology to show that a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards.

The Blue Sea Systems Fuse ATC easyID 20A (pack of 2) Contains 2 of the 20A easyID illuminated ATC blade fuses which uses Light Emitting Diode (LED) technology to show that a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards.

The Blue Sea Systems Fuse ATC easyID 30A (pack of 2) Contains 2 of the 30A easyID illuminated ATCblade fuses which uses Light Emitting Diode (LED) technology to show that a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards.

The Blue Sea Systems Fuse ATC easyID 3A (pack of 2) Contains 2 of the 3A easyID illuminated ATC blade fuses which uses Light Emitting Diode (LED) technology to show that a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards.

The Blue Sea Systems Fuse ATC easyID 7.5A (pack of 2) Contains 2 of the 7.5A easyID illuminated ATC blade fuses which uses Light Emitting Diode (LED) technology to show that a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards.

The Blue Sea Systems Switch Contura DPDT (On)-Off-(On) offers vibration, shock, thermoshock, moisture and salt spray resistance. As well it is specially manufactured for mounting in Blue Sea Systems" water resistant panels. It's other features include: - Ignition Protectection - Safe for installation aboard gasoline powered boats - Meets UL1500 and ISO 8846 ignition protection requirements

The Switch Contura SPST Off-(On) Black offers vibration, shock, thermoshock, moisture and salt spray resistance. As well it is specially manufactured for mounting in Blue Sea Systems" water resistant panels. It's other features include: - Ignition Protectection - Safe for installation aboard gasoline powered boats - Meets UL1500 and ISO 8846 ignition protection requirements

The BusBar 10 Gang Common Bus is the industry standard busbar for positive distribution and the industry standard busbar for the collection of negative or AC ground circuits

The BusBar 20 Gang Common Bus is the industry standard busbar for positive distribution and the industry standard busbar for the collection of negative or AC ground circuits