Furuno

Inside the CM265LH is a seven-element, low-frequency array that operates between 42 and 65 kHz for excellent deep-water performance. The high-frequency ceramic operates between 130 and 210 kHz with a narrow, 10° to 6°, beam width - perfect for picking apart structure and pinpointing tight-holding fish in structure.

Tx Frequency: 165 kHz Output Power: 800 W Minimum Range: 3 m Basic Range: 5-1200m Detection Range: 200 m* (Side Beam Best Performance) 300 m* (Main Beam Directly Under Boat) *Depending on bottom", water and installation. Beam Angle For Triple Beam Sounder: 20° - 50° from right under Display Mode: Triple/Single Beam Sounder, Side Scan, Cross Section," 3D Sounder History <a class=""pagebuilder-button-primary""...

Furuno's DFF3 is a network sounder featuring Furuno Digital Filter (FDF) Technology designed for use with NavNet series devices. This digital Network Sounder can turn any NavNet display into a powerful, dual-frequency digital fish finder.

The FI5001 is an analog Wind Transducer for use with NavNet 3D and the FI50 series of instrument displays.

The 165T-SS54 is a multi-beam transducer for the DFF3D that affords a 120 degree port-starboard view of the underwater world. A built-in motion sensor stabilizes the display to give clear and stable images.

IF-NMEA2K2 The IF-NMEA2K2 is an interface to convert data from NMEA0183 format to NMEA2000 / CAN bus format and vice versa. In addition to the normal conversion mode, the High Speed mode to convert sensor data for Autopilot as well as an AIS mode dedicated to AIS data are available in one compact unit. With these three modes, you can optimize the conversion speed depending on the situational requirements.

Add on Software Module for TimeZero Navigator Professional. By adding the optional DFF3D Module together with the PBG Module to your TZ Professional software, you can connect this Furuno Multi-Beam Sonar to your computer and unlock powerful integration features. The DFF3D Sonar is the first entry level Multi-Beam Sonar able to reliably create PBG up to 200 meters. This data is sent directly to TZ Professional and used to create a highly-detailed PBG map faster than ever before. Note: Requires a PC with TimeZero Navigator Professional Software

Raster / Vector High Resolution Satellite Photos High Resolution Tidal Currents Heightfield Bathymetry Charts Sedimentary Charts Altimetry TIMEZERO and Furuno NavNet(3D & TZT) utilize MapMedia .mm3d altimetry to realistically represent the shoreline. The advantages are numerous such as the instantaneous identification of port entries or the identification of specific shoreline features....

Supplied as an activation code for use on the mytimezero website to activate updates for existing Timezero Mega Wide Charts.  Note: Update only, An existing Timezero Mega Wide Chart is required How to find your System ID Code: Press MENU > INITIAL SETUP > Scroll to the bottom of the list and turn CHART MASTER to ON. Just under CHART MASTER you see System ID Code Note: If more than one unit is going to be in the system - only one unit should be set as CHART MASTER.

TZ Professional software has been designed to answer the navigation needs and requirements of all professional seafarers. With features that are truly cutting-edge, TIMEZERO software has two main objectives: Supreme control and performance. Discover in this section how TIMEZERO software caters to your needs no matter your activity.

TIMEZERO software offers exclusive, native compatibility (simple Ethernet connection) with all the FURUNO DRS antennas as well as the commercial series of FURUNO FAR radars. The radar image can be overlaid directly on the chart in order to have a better understanding of the data. TIMEZERO offers the ability to take full control of the radar directly from a dedicated workspace (Gain, Seaclutter, Rainclutter, etc.). Note: Software Module Only, Requires TZ Navigator or TZ Profesional

The WASSP Echosounder continuously receives multiple depth readings of the seafloor in a swath up to 3.5 times the depth below and behind the vessel so it can see exactly what is happening on the seafloor and water column in real-time. This data is sent directly to TIMEZERO software and used to create a live, high detail and accurate PBG seabed map. Save time and money by mapping the seafloor faster than ever before. Note: Software Module Only, Requires TZ Profesional & PBG Software Module

Supplied as an activation code for use on the mytimezero website to activate updates for existing Timezero Wide Charts. Enter the chart area and System ID Code below into the boxes below. Note: Update only, An existing Timezero Wide Chart is required How to find your System ID Code: Press MENU > INITIAL SETUP > Scroll to the bottom of the list and turn CHART MASTER to ON. Just under CHART MASTER you see System ID Code Note: If more than one unit is going to be in the system - only one unit should be set as CHART MASTER.