GTD Marine SideJets

Product Description

Why Choose GTD Marine SideJets or SidePod?

  • Superior Performance & Control
    Marine SideJets and SidePods deliver the same thrust and manoeuvrability as traditional thrusters—but operate much more quietly and with minimal surface water disturbance. Our SidePod units mount above the cavitation plate of any outboard or outdrive using a simple clamp. Absolutely no modification or drilling of holes required. Remove the SidePod and you would never know it had been there.

  • Simple Installation
    Designed for easy DIY or professional installation:

    • Skin fittings for SideJets go below the waterline with a built-in 10° downward angle.

    • Drilling holes in the hull for the skin fittings is typically the main task. Professionals quote £300 to £400 to fit the skin fittings.

    • SidePods need one small hole, typically up under the bathing platform, for the cable to enter the boat. An extended gland is supplied.

    • Electrical setup is straightforward: just connect to the battery bank and the Victron to the boat’s 12v system.

    • Clear instructions are provided, plus support from our technical team.

    • SideJets are 48v and the SidePods are 24v or 48v. The batteries and charger (Victron is recommended) are not included.

  • Affordable Accessories

    • Hoses are not included but are inexpensive.

    • We’ll provide a recommended purchase list for chargers and batteries.

  • Convenient Wireless Control

    • Comes with two rechargeable waterproof handheld wireless controllers. Use one as a backup or share with a crew member.

    • Combined controller for bow and stern installations.

    • Includes a clip-in bracket for dash mounting. 

  • Low Maintenance

    • All SideJets machinery is installed inside the boat, above the waterline. SidePods can be lifted clear by trimming the leg up.

    • SideJets freshwater flush and drain after use helps prevent corrosion. Turn on the tap for 2 minutes after use.

    • The SideJets unit can be removed in minutes—even while the boat is still in the water—saving on lift-out costs.

  • Cost-Effective

    • Marine SideJets and SidePod systems cost about half as much as traditional systems.

    • Much easier installation.

    • Offers excellent value without sacrificing performance.

  • Reliable Warranty & Support

    • If there’s an issue, we’ll send a replacement overnight (UK only).

    • Swap the unit and return the old one using our prepaid courier service.

    • Even while travelling, you’ll be back on the water quickly. Conditions apply.

 

Marine SideJets 25 delivers 25kgf for boats up to 30 feet.

 

Marine SideJets 40 delivers 40kgf for boats up to 35 feet.

 

Available in 25kgf and 40kgf models with 55kgf coming in a few weeks. Most boats will find a space for this unit which is only 442mm wide.

With straight forward installation, easy “in the water” maintenance and incredibly good price there is now no excuse - time to dock like a pro.

It really does make docking fun.

 

What is in the box?

SideJets

  • 1 x Marne SideJets main unit

  • 1 x quick release mounting plate for the main unit

  • 2 x 316 stainless steel skin fittings to suit your hull angle

  • 2 x PVC quick release union joints

  • 2 × PVC 90 degree elbows

  • 4 x PVC hose tails

  • 1 × 45 degree 316 stainless steel bend (used if required to help with hose routing)

  • 2 x hand held control units

  • 1 x clip in handheld control unit dash mount bracket

  • 1 x battery harness to set up four 12v batteries to 48v including the charging circuit

  • 1 x installation and user manual

What you need to supply:

What you need to supply:

  • Hose and clamps (we recommend double clamping all joints)

  • Batteries. We recommend 20Ah AGM or above with 300 CCA or above

  • Victron charger(s)

  • Sealant

  • Cable management for the SidePod unit

We can supply a list of recommended suppliers upon request.

Approximate budget for these items on a 24v installation would be £300 and for a 48v installation allow £450. Let us have the details of your boat and we can supply a detailed list for you.

Installing skin fittings is something someone competent in DIY can do, but for those who prefer we can put you in touch with an installer.

Call to order

Call us now for the best price on +44 (0) 1202 078 870.

You Can Also...

Get help or write a review...

ask a questionwrite a review