Grid
List
Plastic Fuel Deck Filler with Cap
Plastic deck filler.
Available in Black or White with Red Fuel Cap
For 2" Hose 51mm
A = 85mm
B = 55mm
C = 48mm
D = 33mm
E = 26mm
F = 72mm
G = 46mm
Water Fuel Waste Deck Filler 38mm Winch Handle Opening
Nuova Rade Inox Deck Fillers with Cap are suitable for fuel, fresh water or waste. The use is easily indicated by the colour of the cap: blue for fresh water, red for fuel and brown for waste. The main body is made of reinforced PA. The cap is made of Stainless Steel 316 and reinforced PA for endurance and extra durability in the marine environment.
The cap features a lanyard in order not to be...
Key Free 50mm Stainless Deck Filler
Key free deck filler, manufactured from 316 stainless steel, these deck fillers are available with 50mm hose tail and labelled for Diesel, Water, Waste and Petrol.
Labelling on the cap and the flange
Cap retaining chain
77mm dia flange
95mm dia cap
85mm Hose Tail
3 x M5 fixings required (supplied extra)
Winch Handle Opening 38mm Deck Filler
Polished 316 stainless steel deck fillers with winch handle socket for opening and 38mm hose tail.
The caps and flanges are labelled for Diesel, Water, Waste and Petrol
Winch handle opening
75mm Hose Tail
75mm flange dia
85mm cap dia
3 x M5 fixings (supplied extra)
Winch Handle Opening 50mm Deck Filler
Polished 316 stainless steel deck fillers with winch handle socket for opening and 50mm hose tail.
The caps and flanges are labelled for Diesel, Water, Waste and Petrol
Winch handle opening
75mm Hose Tail
85mm flange dia
95mm cap dia
3 x M5 fixings (supplied extra)
Bailer Flexible, Floating, Petrol Blue, 190 x 135 mm
Bailer Flexible, Floating, Petrol Blue, 190 x 135 mm
Bailer Funnel with Filter 290 x 110 mm
Bailer Funnel w/Filter, 290 x 110 mm
Barton Marine Dinghy Mast Support
The Dinghy Mast Support is designed to support the aft end of a dinghy mast when towing. Simply fits onto standard transom fittings and is instantly ready for use. Fully adjustable for different transom heights and features a removable pintle to accommodate different transom layouts. The yolk features a soft neoprene pad to protect the mast, shrouds and lines. Generous eyelets in the yolk allow for...
Barton Marine High Load Eye
The High Load Eye with loop is available in 3 sizes and can be used in various applications on board including Baber hauler, preventers, mast base block, tidies, emergency, occasional and toe rail blocks etc.
Barton Marine High Load Low Friction
The High Load Low Friction Eye/Ring with loop is available in 6 sizes and can be used in various applications on board including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks and toe rail blocks etc. The High Load Low Friction Eye/Ring combined with the Dyneema loop gives you a fast, efficient, simple and extremely strong solution to changing the direction of...
Boat Bilge Hand Bailer Rigid Red, 365x110 mm
Bailer Rigid Red, 365x110 mm
Buoyancy Bag with valve for Optimist
Buoyancy Bag with valve for Optimist, Nylon with TPU, max. air pressure 3.6PSI, 41x100cm, grey
Buoyancy Tank Drain Socket w/Plug, Int. Ø18mm, Black
Buoyancy Tank Drain Socket, with Captive Plug
Internal diam.: 18 mm, External diam.: 23 mm
Clamcleat CL202 horizontal
Clamcleat CL202 horizontal, low profile black nylon cleat. Can either hold two ropes or a single rope can be cleated on either side.
Rope Diameter: 6-10mm
Material: Nylon
Hole Centres: 51mm
Length: 74mm
Width: 79mm
Height: 20mm
Bolt Size: M6
Screw Size: 6.3mm (No 14)
Holt Stainless Steel Plate without Blocks - Replacement (Laser)
Holt Stainless Steel Plate c/w Blocks - Replacement (Laser)
Stainless Steel Plate without Blocks suitable for Laser® dinghies.
Please note:
These replica and training parts are replacements, they are not official parts bearing an official ® mark and therefore CANNOT BE USED in official ILCA Class Association events.
Optimist Hiking Straps, L: 1,5m W: 5cm
Optimist Hiking Straps, L: 1,5m W: 5cm
Plastic Hand Held Dinghy Bailer Scoop
Dinghy Boat Hand Bailer
A heavy duty plastic scoop bailer suitable for dingies and clearing the last drop of bilge water.
The bailer has a decent handle which to grab and flexible enough that it wont get broken easily.
158x128x215mm
2.5 Litres
Plastimo 16682 - Small Deck Bushes - D7mm (X4)
Plastimo 16682 - Small Deck Bushes - D7mm (X4)
Enhance your sailing experience with the Plastimo 16682 Small Deck Bushes. This set includes four high-quality bushes with a diameter of 7mm each. Designed for durability and reliability, these small deck bushes are perfect for various marine applications. Whether you're a seasoned sailor or a novice, trust Plastimo for top-notch marine accessories.
Features:
Set...
Plastimo Bulls eye fairlead 17 mm
Description
Black
Overall dimensions Width x height : 55 x 30 mm
Plastimo Flag Halyard Pulley
The Plastimo 16826 - Small Plastic Block is a versatile and lightweight solution for sailing and marine applications.
Crafted with precision and durability, this compact block is an essential component for enthusiasts and seasoned sailors alike.
Its sturdy plastic construction ensures reliability in various conditions, making it a valuable addition to your marine equipment.
Experience the...
RWO 16mm Track End Stop Black Plastic (x4)
For 19mm stainless steel tracks. Slides, available with and without spring loaded positive plungers.
LIMITED END OF LINE STOCK AVAILABLE.
RWO Cleat 8mm Halyard Black 90mm Long (x2)
Halyard Cleats:
Self jamming cleat, suitable for halyards, control lines, down hauls etc. For ropes up to 8mm.
Length 90mm
Weight 6g
LIMITED END OF LINE STOCK AVAILABLE.
RWO R0691 – Endbutton 16mm
Plastic end caps for 16mm tube
SKU: R0691
LIMITED END OF LINE STOCK AVAILABLE.
RWO R2064 – Bung Only For R2060
Bayonet white drain bung aperture 17mm diacut out 22mm, replacement bung for R2060
LIMITED END OF LINE STOCK AVAILABLE.
RWO R3480 – Xt2 Track Endstop (Pk Size: 1)
R3480 – Xt2 Track Endstop (Pk Size: 1)
Plastic end caps for the XT2 track 5mm fixing
SKU: R3480
LIMITED END OF LINE STOCK AVAILABLE.
RWO R6725 – Quickpin Pull B M6X25 (Pk Size: 1)
Quick release 6mm pin working length 25mm
LIMITED END OF LINE STOCK AVAILABLE.
RWO R7213 – 28 Nova Hook Block (Pk Size: 1)
R7213 – 28 Nova Hook Block (Pk Size: 1)
Series 28 plain bearing single swivel hook block, maximium line size 8mm, maximium working load 430kgs
SKU: R7213
LIMITED END OF LINE STOCK AVAILABLE.
RWO R8370 – 10mm Thru Deck Low Friction Bush
R8370 – 10mm Thru Deck Low Friction Bush
Thru-deck low friction bush bore dia 10mm, hole dia 14mm, depth thru deck 8mm, weight 2.2gms, the PTFE coating seals each unit creating an extremely low friction surface. Friction is only increased by 15% compared to a plain bearing block. Up to 250% stronger, constructed from HE30 marine grade aluminium and anodised to 40 microns. Up to a 90% reduction...
RWO R8420 – Hook 3mm Open s/s (Pk Size: 1)
R8420 – Hook 3mm Open s/s (Pk Size: 1)
Stainless steel open hook, material dia 3mm, opening 6.5mm with eye 5mm dia
LIMITED END OF LINE STOCK AVAILABLE.
RWO Spare Bung for 6-R2221 19mm (x2)
Bungs, All the choice you need for transom or buoyancy tank drains. Three types available, push-fit rubber bung version, a half turn bayonet and a screw thread + 'O' seal all with matching sockets. Both bayonet and screw bungs are fitted with a retainer to prevent loss. Spare bungs, are available separately.
LIMITED END OF LINE STOCK AVAILABLE.
RWO Stainless Steel Shroud Strip 19 x 127mm
Shroud And Strip Anchorages in polished Stainless Steel to suit most types of hull or gunwale.
Includes shroud plates with thickened tops, flat strips, channel section with clevis pin adjustment, anchorage plate suitable for flanged G. R. P. hulls and heavy duty version with central Spine.
We recommend using top flanges to enhance and support at deck level.
Fixing Hole Size - 5mm
Number...
Spinlock Bulls Eye for lines up to 6mm
Bulls Eye for lines up to 6mm
Spinlock Joystick handle module
Joystick handle module
Allen AL-0052 7mm Bullseye Fairlead (Pack of 2)
7mm Bullseye Fairleads are ideal for running ropes or wires around your boat, and feature impact and UV resistant material.
Pack of 2.
Allen AL-0452 11mm Bullseye Fairlead (Pack of 2)
Acetal open based and bullseye rope fairleads
Inside Diameter – 11mm
Fixing Hole Size – 3mm
Distance between fixing – 18mm
Weight – 4g
Allen AL-0153 7mm Low Profile Fairlead (Pack of 2)
This low profile 7mm Fairlead from Allen has been injection moulded with high-grade acetal, and comes supplied in packs of 2.
Allen AL-0099 Plastic Toe Strap Webbing Plate
Plastic fixing plates for toe strap webbing
Size 47mm Length
Grey or White
Supplied as a pair
Clamcleat CL203 Junior Rope Cleat
Clamcleat Junior CL203 rope cleat with fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Black plastic
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat CL209 Midi Rope Cleat
Clamcleat Midi CL209 rope cleat without fairlead suitable for most dinghy applications.
Suitable for 4-8mm dia. rope
Black plastic
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat CL205 Major Rope Cleat
Clamcleat Major CL205 rope cleat without fairlead suitable for most dinghy and dayboat applications.
Suitable for 10-16mm dia. rope
Black plastic
Fixings: 2 x No.14csk screws - 5/16 rivets - M8 csk set bolt
Clamcleat C211 MK2 Racing Junior Rope Cleat
Clamcleat Racing Junior CL211 MK2 rope cleat with fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat C217 M1 Starboard Side Entry
Clamcleat Junior CL217 rope cleat with side entry fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Side entry fairlead allows ropes to be hooked in for cleating, yet easily removed
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat 3-6mm Side Starboard Hard Anodised Grey Mk2
Clamcleat Junior CL217 MK2A rope cleat with side entry fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Side entry fairlead allows ropes to be hooked in for cleating, yet easily removed
Hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat C218M1 Port Side Entry
Clamcleat Junior CL218 rope cleat with side entry fairlead suitable for most dinghy applications.
Suitable for 3-6mm dia. rope
Side entry fairlead allows ropes to be hooked in for cleating, yet easily removed
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat C236 MK1 Racing Rope Cleat with Roller
Clamcleat Junior CL236 MK1 Racing rope cleat with top roller suitable for most dinghy applications. The top roller allows ropes to enter the cleat from above and is also ideal for sun umbrellas, shades and sun sails.
Suitable for 3-6mm dia. rope
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat C253 Trapeze & Vang Rope Cleat
Clamcleat CL253 trapeze and vang rope cleat with roller suitable for most dinghy applications.
Suitable for 4-8mm dia. rope
Dinghy trapeze line adjustment
Vangs & Kicking strap adjustment
Supplied with a black Link (PTLINK). This makes releasing the rope a lot easier
Available in silver or hard anodised finish.
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat CL215 Midi Side Fixing Rope Cleat
Clamcleat Side Fixing Midi CL215 rope cleat without fairlead suitable for most dinghy applications.
Suitable for 4-8mm dia. rope
Black plastic
Fixings: 2 x No.8csk screws - 5/32 rivets - M4 csk set bolt
Clamcleat CL238 Racing Vertical + Spring Gate Silver
CL238 Racing Vertical with Spring Gate
When using the Clamcleat CL238, the red gate is flipped up by hand to keep the rope out of the alloy cleat and prevent unintentional entry of the rope into the cleat.
Rope Diameter: 6 - 12mm
Material: Aluminium
Hole Centres: 72mm
Length: 91mm
Width: 40mm
Height: 33mm
Bolt Size: M6
Screw Size: 6.3 (No 14)