Stainless Steel Folding Mast Step
Mast Step
These low profile lightweight hinged mast steps are manufactured from bright polished stainless steel.
Each step has a secure and positive hinged action and is rattle free.
The foot area has a toothed non slip surface and the profile turns up at the outboard end ensuring a firm and secure foothold.
Secure by four 5mm pop rivets and fit at 500mm spacing as shown in the diagram.
Mast steps...
Stainless Steel Folding Step
Folding Step
Cast 316 Stainless Steel folding step , which only projects 24mm above the surface when folded.
Folding Step - base size - 111mm x 47mm
Hole centres approx 90mm
Insta-Lok Snap Davit Kit - Grey
Providing a safer option for entering or exciting an inflatable tender as well as practical storage, the Polymarine Insta-lock Snap Davit kit comprises of 2 spring loaded davit heads which secure to the Swim Platform and 2 Pads with lock-on-bars which are glued onto the Inflatable. When aligned the sprung loaded davit heads snap onto the lock-on-bar. The dinghy is firmly locked to the Host Craft ready...
Stainless Steel Table Brackets
Stamped Stainless Steel Table Brackets
Wall plate - 54mm x 60mm
Table plate - 44mm x 70mm
Set of 2 complete brackets
Stainless Steel Hasp and Staple
Stainless Steel (304) hasp and staple for cabin door or equipment locker security.
Dimension when hasp is closed: 33mm x 70mm
Fixings: Requires 7x M4 csk stainless steel fixings.
Stainless Steel Twist Lock Hasp and Staple
Stainless Steel (304) hasp and staple with twist lock and padlock eye, suitable for cabin or locker doors.
Two Sizes:
Dimensions when hasp is closed: 24mm x 64mm
Dimensions when hasp is closed: 24mm x 91mm
Stainless Steel Lockable Hasp and Staple
Stainless steel locking hasp and staple
Length: 80mm (closed)
Width: 30mm
With key
Chrome Toggle Fastener
Chromed brass toggle fastener with padlock eye.
Length O/A 90mm
Straight or 90º Option
Spring Loaded Lift ring
Stamped 304 sprung loaded stainless steel flush lifting ring, suitable for lockers, floor boards and other onboard or DIY applications.
Size: 66mm x 55mm
Stainless Steel Heavy Duty Lift Ring
Heavy Duty Stainless Steel Flush Lift Ring
Cast 316 Stainless Steel
No.8 Counter sunk holes
55 x 77mm
Chrome Locker Latch
Locker latch in hot pressed brass with chrome finish.
Size: 50mm
Slam Latch for Hatches and Lockers
Cast 316 stainless steel slam latch with plastic backing plate and spacers.
Ring pull can stay upright for ease to pull, to be released by another pull.
For doors 3mm to 19mm thick
62mm O/A
51mm cut out.
Locking Lift Handle
Stainless steel locking lift handle.
Size: 49 x 55mm
Locking barrel
Supplied with 2 keys
Stainless Steel Cabin Latch
Stainless Steel Square Cabinet Latch
This new Square latch features smooth and silent operation and benefits from a "slam shut" feature, only locking after the button is depressed.
For door thicknesses 16mm to 22mm.
Strike and spacers included.
25mm Cut Out.
Made of 316 Stainless Steel
Timage Chrome 230.CC Bathroom Privacy Snib Lock
Spindle (mm)7.00
Finish Chrome
Weight (kg)0.23
Chromed Brass Cupboard Bolt
Heavy Duty Cabin/Cupboard Bolt
Chromed Brass
37mm x 57mm
Chromed Roller Catch
Chrome on brass roller catch door retainer.
Length: 25mm or 50mm
Chromed Brass Ball Catch
Adjustable chromed brass ball catch, the ball tension can be adjusted to ensure the door or locker is retained closed
Length: 44mm or 49mm
Nylon rollers
Brass Cupboard Bird Hook Catch
Brass cupboard catch, simple finger pull releases the sprung loaded catch.
Supplied with strike plate & back plate
29mm x 16mm.
Teak Finger Ring
Solid Teak Finger Ring
33mm O/S Dia
18mm Deep
Camlock Hatch Lock
Chrome Camlock Hatch Lock
Cam locks with 180°, 37mm straight cam.
An ideal lock for sliding hatches
25mm Thickness
Pack of 2
Hatch Support Spring 220mm
A simple yet effective solution to holding open hatchs and locker doors.
The hatch retaining spring when rigid in straight upright position allows the hatch to be supported open, or to bend the spring will allow hatch closure.
Stainless steel construction
220 mm long
Stainless Hatch Support
Fully adjustable hatch support stay manufactured in 316 stainless steel.
Holds the hatch part or fully open
Strong and corrosion resistant
Simple adjustment
250 - 430mm
305 - 530mm (no stock until March 2024)
Burg Wachter Marine Padlock - 40mm Atlantic Long Reach
Seawater Proof Padlock - Completely rustproof inside and out, long reach 39mm shackle headroom
Ideal for securring boats, outboard engines and lockers
Plastic bumper protects gelcoat and fittings
Solid brass body
Stainless steel shackle
Double bolted
40mm body
Long reach - 39mm shackle headroom
Burg Wachter Marine Padlock - 32mm
Seawater Proof Padlock - Completely rustproof inside and out.
Ideal for securring boats, outboard engines and lockers
Plastic bumper protects gelcoat and fittings
Solid brass body
Stainless steel shackle
Double bolted
32mm body
Burg Wachter Marine Padlock - 40mm
Seawater Proof Padlock - Completely rustproof inside and out.
Ideal for securring boats, outboard engines and lockers
Plastic bumper protects gelcoat and fittings
Solid brass body
Stainless steel shackle
Double bolted
40mm body
Burg Wachter Marine Padlock - 32mm 3 Pack Keyed Alike
Seawater Proof Padlock - Completely rustproof inside and out, set of 3 keyed alike.
Ideal for securring boats, outboard engines and lockers
Plastic bumper protects gelcoat and fittings
Solid brass body
Stainless steel shackle
Double bolted
32mm body
Keyed alike
Burg Wachter Marine Padlock - 40mm 2 Pack Keyed Alike
Seawater Proof Padlock - Completely rustproof inside and out, set of 2 keyed alike.
Ideal for securring boats, outboard engines and lockers
Plastic bumper protects gelcoat and fittings
Solid brass body
Stainless steel shackle
Double bolted
40mm body
Keyed alike
Solid Brass Flush Ring 63x75mm
Rectangular solid brass flush ring, limited stock available in 2 sizes:
Size: 30mm x 40mm
Size: 63mm x 75mm
Solid Brass or Chrome Round Flush Ring
Round solid brass flush ring, supplied with brass or chrome finish
Size: 38mm dia.
Chromed Solid Brass Flush Ring
Rectangular solid brass flsuh ring with chrome finish.
Size: 51 x 38mm
Chrome Cabin Door Hook
Cabin door hooks with chromed brass stamped posts and casted hooks
62mm or 76mm Length
76mm Brass Cabin Hook
Hot pressed brass cabin hook
Size: 76mm
Slight surface discolouration may occur with brass products
Barrel Bolt 92mm Chrome
Chrome Plated Brass Barrel Bolt
Length 92mm
Width 25mm
8mm dia. Stainless Steel Drop Nose Pins
8mm dia. Drop Nose Pins
High quality pins in 316 stainless steel with a locking drop nose and groove for wire or rope attachment.
Locks in both open and closed positions
Lengths shown are the working length not the overall length
Seasure 23.02 Staple for 23.00 (52mm hasp)
Replacement staple for Sea Sure Hasps and Staple.For 23.00 (52mm hasp)
Polyamide Plastic Hinge 30x60x3mm Black
Made of polyamide
With Stainless Steel Pin
30x60x3mm
Rectangular
Polyamide Plastic Hinge 40x75x3.5mm Black
Made of polyamide
With Stainless Steel Pin
40x75x3.5mm
Rectangular
Polyamide Plastic Hinge 60x40x3mm Black
Made of polyamide
With Stainless Steel Pin
60x40x3mm
Rectangular
Polyamide Plastic Hinge Hexagonal 95x60x4.5mm Black
Made of polyamide
With Stainless Steel Pin
95x60x4.5mm
Hexagonal
Black
Polyamide Plastic Hinge Hexagonal 95x60x4.5mm White
Made of polyamide
With Stainless Steel Pin
95x60x4.5mm
Hexagonal
White
Stainless Steel Flush Hinge 70mm x 38mm
Stainless Steel Top Pin Hinge
Flat round sided hinge in 316 stainless steel
Size (Open) 70 x 38.5mm
Length 35 + 35mm = 70mm
Thickness 2mm
4 x 4mm or No.8 CSK fixings required
Stainless Steel Hinge 101mm x 30mm
3 Holes per plate
Stainless Steel Hinge 140mm x 40mm
3 Holes per plate
Stainless Steel Hinge 77mm x 40mm
3 Holes per plate
Stainless Steel Flush Hinge 70mm x 38mm
Stainless Steel Flush 2 Pin Hinge, with casted centre piece, ideal for folding tables.
Flush 2 Pin Hinge
75mm x 38mm
Stainless Steel Hinge 75 x 40mm
Stainless Steel Back Flap Cuddy Hinge
Flat round sided hinge in 316 stainless steel
Size (Open) 75 x 40mm
Length 37.5 + 37.5mm = 75mm
Thickness: 2mm
6 x 4mm or No.8 CSK fixings required
Stainless Steel Hinge 127.5 x 40mm
Stainless Steel Cuddy Hinge
Flat round sided hinge in 316 stainless steel
Size (Open) 127.5 x 40mm
Length 37.5 + 90mm = 127.5mm
Thickness: 2mm
7 x 4mm or No.8 CSK fixings required