Nuova Rade
Grid
List
22Ltr Hulk Portable Fuel Tank - With Guage
Nuova Rade portable outboard fuel tanks are manufactured in strong polypropylene with integral carry handle and strong enough to be used as a seat.
22Ltr Capacity (no guage)
Vented filler cap
8mm outlet with filter
Size: L46 x H30.5 x W26.5cm
(Model shown is 30Ltr with guage)
30Ltr Hulk Portable Fuel Tank - With Gauge
Nuova Rade portable outboard fuel tanks are manufactured in strong polypropylene with integral carry handle and strong enough to be used as a seat.
30Ltr Capacity (no guage)
Vented filler cap
8mm outlet with filter
Size: L51 x H36 x W27cm
Fuel Tank & Battery Bracket Kit
Fuel tank bracket kit for securing tanks and batteries using mounting pads and webbing strap.
2 x plastic pads
1.5mtr webbing strap
Case for Electrical Control Panel, w/Lid, White
Case for Electrical Control Panel, with Lid, White
It is ideal for storing the boat’s electrical control panel. Made of UV-resistant high-grade ASA, it provides resistance to damage and chemical solvents. Preferably designed for internal use. UV-resistant cover, frame and container with a 150º opening door and a durable handle. It is specially designed with a non-skid surface and can...
Case for Electrical Control Panel, with Lid, White
It is ideal for storing the boat’s electrical control panel. Made of UV-resistant high-grade ASA, it provides resistance to damage and chemical solvents. Preferably designed for internal use. UV-resistant cover, frame and container with a 150º opening door and a durable handle. It is specially designed with a non-skid surface and can be mounted vertically. This case is mounted with hidden...
Fuel Line Tank Fem. Conn.w/Ø9,5mm Barb f/HON. Eng.
Fuel Line Tank Fem. Conn.w/Ø9,5mm Barb f/HON. Eng.
Fuel Line Tank Female Connector w/Ø9,5mm Barb, for OMC/JOHNSON/EVINRUDE Engines
Fuel Line Tank Fem. Conn. w/Ø9,5mm Barb OMC/JOH/EVI
Fuel Line Tank Female Connector with Ø9,5mm Barb, for YAMAHA/MERCURY/MARINER Engines
Fuel Line Tank Fem.Conn.w/Ø9,5mm Barb YAM/MAR/MER Eng
Anti Splash Funnel with filter, Ø180mm, H.240mm
Funnel with filter, Ø180mm, H.240mm
Battery Switch With Plastic Case Watertight Lid White
It has an integrated battery switch and a case to protect it from external factors. Made of ASA. Watertight gasket included.
Marine Battery Box Black upto 100A/h 431x257x256mm
Plastic Battery Box
• External dimensions (LxWxH) = 431x257x-256mm
• Internal dimensions / Maximum battery size (LxWxH) = 339x199x224mm
• Can hold battery up to 339mm long, of various group sizes (e.g. 46, 53, 92 and others)
• Mounting equipment: Includes durable holddown fastening strap and foot clamps that secure the strap onto the supporting surface (screws not included)
•...
Marine Battery Box Black upto 120A/h 470x225x255mm
Plastic Battery Box
?• External dimensions (LxWxH) = 470x225x- 255mm
• Internal dimensions / Maximum battery size (LxWxH) = 385x175x225mm
• Can hold battery up to 385mm long, of various group sizes (e.g. 27, 49, 93 and others)
• Customisable length: Includes separator that divides the box into partitions, ranging from 50 to 330mm long
• Mounting equipment: Includes durable...
Marine Battery Box Black upto 80A/h 340x230x250mm
Plastic Battery Box
• External dimensions (LxWxH): 340x230x250mm
• Internal dimensions / Maximum battery size (LxWxH) = 280x195x230mm
• Designed for batteries up to 280mm long (of group sizes 24, 25, 34, 35, among others)
• Mounting equipment: Includes durable hold-down fastening strap and foot clamps that secure the strap onto the supporting surface (screws not included)
•...
Shower Head, ABS, Short, 1/2'' Thread w/o Hose, White
- ½” threaded shower head with trigger
- Made of ABS
Shower Head, with Hose , White
With a shower head made of ABS and a PVC hose. It is available in white colour. Having easy installation, Nuova Rade Shower Head with Hose is intended for flush mount installation on the deck
or as transom shower.
Nuova Rade Deck Shower/Mixer Tap
Nuova Rade Deck Shower
Specifically designed to combine two functions in one single housing, they allow major room saving and easy access. In addition to their simplified installation process, they have been engineered to combine optimum comfort, durability and absolute safety.
Supplied with white hinged cover, the housing will fit vertically or horixzontally in any deck or transom to give the boat...
BLIZZARD Tank Waste Water
BLIZZARD line of horizontal waste water tanks is made of high-density polyethylene material, in brown colour.
Polyethylene material is used to prevent any waste odors.
The line consists of a full-size range of 40L, 60L, 80L and 100L, complying with international standards and can safely hold waste water from toilets until they can be discarded safely. This waste water tank is available in two...
Nuova rade Flexible Fresh Water Tanks Rectangular
The flexible, lightweight and form-fitting water tanks are a strong, reliable, practical and low cost solution to store water on your boat when a rigid water tank is not an option. Water tanks are supplied
complete, ready to install, with two welded fittings. A Ø 38 mm inlet fitting and a Ø 12 mm outlet valve with moveable thread tightening rings for maximum sealing. The tanks have metal...
Nuova Rade Winch Handle Pocket
Made of soft PVC for less noise caused by the shocks of the winch handle
Easy installation
UV-resistance
Special feature for holding the winch handle (20cm) steady
Available in two colours (white & grey)
L.240mm, W.92mm, H.55mm,
Winch Handle Holder Side Mounted
Ideal for safely keeping your winch handle in place on board
Side mounted installation for space saving
Can be used instead of a winch handle pocket
Made of glass reinforced nylon
Available in grey colour
Winch Handle Holder, Side Mounted, Glass Reinforced Nylon, L.60mm, W.19mm, H.45mm, Grey
Telescopic Buoyant Paddle
Ideal for liferafts, lifeboats or small tenders. It features a telescopic aluminium pole and a palm grip made of PP to provide a comfortable handle.
Available in dimensions of Ø25mm- L51,5-76,5cm and in black colour.
5cm Sailboat Yacht Tube Radar Reflector
An effective and economical sail boat tube radar reflector creating minimum windage, lightweight and easy to hoist up the rigging.
This sailboat version features loops for attachment and a shroud groove to aid fitting.
Length 59cm x Ø 5cm
(2m² max. reflective area)
5cm Tube Radar Reflector with Base Mount
An effective and economical tube radar reflector creating minimum windage lightweight and easily mounted to the cabin or radar arch.
The radar reflector features a hinged mounting bracket which allows it to be lowered when towing or morring.
Length 56cm x Ø 5cm
(2 m² max. reflective area)
12" Aluminium Octahedral Folding Radar Reflector
Simple, convenient radar reflector which stows flat when not in use and prefect for smaller vessels.
Hoist or mount at an angle as high as possible. The angle of mounting is often known as the rain catcher position for best performance.
3m square reflective area
Size: 215x215x300mm
16" Aluminium RORC Octahedral Radar Reflector
Simple, convenient radar reflector which stows flat when not in use. This model gives a greater reflective area and still suitable for smaller vessels.
Hoist or mount at an angle as high as possible. The angle of mounting is often known as the rain catcher position for best performance.
5m square reflective area
Size: 300x300x415mm
18" Aluminium RORC Octahedral Radar Reflector
Simple, convenient aluminium radar reflector which stows flat when not in use.
This model is the most popular due to the larger reflective area and should be hoisted or mounted at an angle as high as possible. The angle of mounting is often known as the rain catcher position for best performance.
7m square reflective area
RORC 18"
Size: 340x340x470mm
Engine Bay Fire Extinguisher Port
It is used to discharge a fire extinguisher into an enclosed area when a fire has broken out, preventing the entrance of oxygen and minimising the risk of human injury.
It can also be used to access the engine box with an extinguisher without opening the box.
Made of white PA
Hole closed with a PVC flap
Can be easily installed, by using 4 countersunk recessed...
Flush Mount Emergency Rope Boarding Ladder Man Over Board
• It helps any crewmember get back easily on board without external help
• Suitable for frequent use (during your vacations) or in case of Man Over Board
• It consists of 3 polypropylene steps and 1 stainless steel handle assembled by a highly resistant line (bright yellow polyester of Ø 3mm)
• It is stored in a polyamide tube with a grey polypropylene cap, for optimum...
Antenna Rails mount, 1 adjustment knob
This ratchet mount is made of reinforced nylon and may be installed on rails of 19.1 up to 25.4mm diameter. The ratchet mount allows you to adjust the horizontal position of the antenna manually. It is available in white colour.
Gasket for EURO 1 Hatch Ø9mm, 1,20m
Gasket for EURO 1, Ø9mm, 1,20m
Gasket for EURO Hatch 2 38-59, Ø9mm, 1.60m
Gasket for EURO Hatch 2 38-59, Ø9mm, 1.60m
INDUSTRIAL Inspection Hatch Black
INDUSTRIAL Inspection Deck Hatches
The Access and Inspection Hatches are ideal for easily reaching and controlling various areas on board, such as fuel lines, electrical cables, gauges, controls, even the engine. They are specially designed
with a non-skid surface and can be mounted both horizontally as well as vertically. All hatches are mounted with hidden screws for discrete appearance. They...
Nuova Rade EURO 1 Escape Hatch (448 x 268mm)
EURO 1 & 2 Hatches are framed hatches with a thick frame made of UV-resistant high-grade ASA, providing resistance to damage and chemical solvents. They have a UV resistant, 8 mm thick plexiglass window, that can stay open. Designed for external use. Can be mounted both horizontally and vertically. These hatches are mounted with hidden screws for discrete appearance. EPDM rubber gasket provides...
Nuova Rade EURO 2 Escape Hatch (480 x 480mm)
EURO 1 & 2 Hatches are framed hatches with a thick frame made of UV-resistant high-grade ASA, providing resistance to damage and chemical solvents. They have a UV resistant, 8 mm thick plexiglass
window, that can stay open. Designed for external use. Can be mounted both horizontally and vertically. These hatches are mounted with hidden screws for discrete appearance. EPDM rubber gasket
provides...
CLASSIC Storage Hatches with Drawers (275 x 375mm)
CLASSIC LINE deck hatch is available in many dimensions and in White. Made of UV-resistant high-grade ASA, it provides resistance to damage and chemical solvents.
Designed for external use. UV-resistant frame and cover with a 180ο opening door and durable handles. It is specially designed with a non-skid surface and can be mounted both horizontally and vertically.
EPDM rubber gasket provides...
INDUSTRIAL Access Deck Hatches with Detachable Cover 316 x 360mm
The Access Hatch with Detachable Cover is made of tough UV-resistant PP (polypropylene), impervious to chemical solvents, and are ideal for both internal and external use. It features a completely detachable door for ease of use, handles, that can be fitted with a lock, and a sealed gasket. The non-skid surface and the hidden screws are additional important features
Colour White
A 316mm
B...
Inspection Hatch with Removable Bag
Made of UV-resistant high-grade ASA in order to provide resistance to damage and chemical solvents. Available in three dimensions and in white colour. It has no hinges, so that you can completely remove the cover. This inspection round hatch includes also a removable bag, with a ring to secure it in place. The bag is ideal for storing your personal items on board. Its opening is easy, since the specially...
KROME Deck Hatches
KROME deck hatch is available in six dimensions.
Made of UV-resistant high-grade ASA, it provides resistance to damage and chemical solvents. Designed for external use, it features UV-resistant frame and cover with a 180ο opening door and one or two durable handles. It is specially designed with a non-skid surface and can be mounted both horizontally and vertically.
This hatch is mounted...
MID LINE Deck Hatches (278 x 378mm)
MID LINE deck hatch is available in many dimensions, in white colour. Made of UV-resistant high-grade ASA, it provides resistance to damage and chemical solvents. Designed for external use.
UV resistant frame and cover with a 180ο opening door and two durable handles. It is specially designed with a non-skid surface and can be mounted both horizontally and vertically. This hatch is mounted...
Plastic Inspection Hatch with O-Ring 104mm Internal
This Inspection Hatch is made of UV-resistant high-grade ASA in order to provide resistance to damage and chemical solvents. Available in many dimensions and a variety of colours (white, cream, black). It has no hinges, so that you can completely remove the cover. Its opening is easy, since the specially designed thread automatically ejects the cover, once you turn it 60ο counter clockwise...
Plastic Inspection Hatch with O-Ring 130mm Internal
This Inspection Hatch is made of UV-resistant high-grade ASA in order to provide resistance to damage and chemical solvents. Available in many dimensions and a variety of colours (white, cream, black). It has no hinges, so that you can completely remove the cover. Its opening is easy, since the specially designed thread automatically ejects the cover, once you turn it 60ο counter clockwise...
Plastic Inspection Hatch with O-Ring 155mm Internal
This Inspection Hatch is made of UV-resistant high-grade ASA in order to provide resistance to damage and chemical solvents. Available in many dimensions and a variety of colours (white, cream, black). It has no hinges, so that you can completely remove the cover. Its opening is easy, since the specially designed thread automatically ejects the cover, once you turn it 60ο counter clockwise...
TOP LINE Gas Locker for Gas Bottle 3kg (370 x 390mm)
TOP LINE deck hatch is available in many dimensions and White. Made of UV-resistant high-grade ASA, in order to provide resistance to damage and chemical
solvents. Designed for external use. UV-resistant cover and frame, with a 180ο opening door and a durable handle. It is specially designed with a non-skid surface and can be mounted both horizontally
and vertically.
This hatch is mounted...
Classic Deck Hatch 275 x 375mm
CLASSIC LINE deck hatch is available in varios sizes and made of UV-resistant high-grade ASA, it provides resistance to damage and chemical solvents.
Designed for external use it has a UV-resistant frame and cover with a 180º opening door and durable handles. It is specially designed with a non-skid surface and can be mounted both horizontally and vertically. EPDM rubber gasket provides resistance...
Classic 355 x 600mm Deck Hatch
CLASSIC LINE deck hatch is available in varios sizes and made of UV-resistant high-grade ASA, it provides resistance to damage and chemical solvents.
Designed for external use it has a UV-resistant frame and cover with a 180º opening door and durable handles. It is specially designed with a non-skid surface and can be mounted both horizontally and vertically. EPDM rubber gasket provides resistance...
Top Line Storage Hatch Box
Top Line storage deck hatches are ideal for any sailboat, yacht, motor or fihsing boat.
They are made of UV-resistant high-grade ASA plastic, in order to provide resistance to damage and chemical solvents. Designed for external use the hatches have a UV-resistant cover and frame, with a 180? opening door and a durable handle. They are specially designed with a non-skid surface and can be mounted...
Top Line 270 x 375mm Deck Hatch
TOP LINE deck hatch is available in various sizes and made of UV-resistant high-grade ASA, in order to provide resistance to damage and chemical solvents.
Designed for external use with UV-resistant cover and frame, with a 180º opening door and a durable handle. It is specially designed with a non-skid surface and can be mounted both horizontally and vertically. This hatch is mounted with hidden...
Top Line 315 x 440mm Deck Hatch
TOP LINE deck hatch is available in various sizes and made of UV-resistant high-grade ASA, in order to provide resistance to damage and chemical solvents.
Designed for external use with UV-resistant cover and frame, with a 180º opening door and a durable handle. It is specially designed with a non-skid surface and can be mounted both horizontally and vertically. This hatch is mounted with hidden...