Best Selling

Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies. An excellent choice for fiberglass and wood hulls, this 8-pin transducer has a depth of 1,200 ft; an operating frequency of 130-210 kHz; a beamwidth of 9-15 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition. It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 14x23 to 3x5 degrees; and a 0 to 26 degree deadrise.

This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. *Do not use on metal hulls.

Garmin 010-11634-22 Airmar B75H Bronze Thru-Hull Transducer with Garmin 8 Pin Connector 20° Tilted version for 16°-24° deadrise Our bronze thru-hull mount transducer is designed to allow both traditional and spread spectrum scanning when used with a compatible sonar. A 600 W transducer with 8 pins, it has a depth of 800 ft; an operating frequency of 130-210 kHz; a beamwidth of 15/9 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat

This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls.

The P66 combines Depth, Speed and Temperature into a single Multisensor transom-mount transducer. Featuring a 50/200 kHz, dual-frequency, single, ceramic element. This hydrodynamic housing with its rounded nose reduces the turbulence under the transducer’s acoustic face for accurate high-speed readings and clear display images.

This plastic thru-hull mount transducer uses the low frequencies for deep water performance and high wide frequencies for shallow water performance.

Garmin 010-11868-20 Airmar SS60 600W 50/200 Thru-Hull Transducer With Garmin 8 Pin Connector 0° Tilt Version for 0-7° deadrise This stainless steel 600 W 8-pin transducer provides a vertical beam without a fairing and is excellent for fiberglass and wood hulls. It has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45/12 degrees; and 0 to 7 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Garmin 010-11868-22 Airmar SS60 50/200kHz Thru-Hull Transducer with Garmin 8 Pin Connector 20° Tilted version for 16°-24° deadrise The SS60 is a 600 W, 50/200 kHz transducer which integrates Airmar’s popular tilted element feature. Tilted element transducers have the ceramic element fixed at either a 20°, 12° or 0° angle within the transducer housing. The transducer is installed almost flush to the hull and the tilted element corrects for the hull deadrise by orienting the beam directly down. This assures maximum echo returns to the transducer and more accurate depth readings.

Requires separate install kit for trolling motor mount application.

These screen protectors reduce sunlight glare, minimize fingerprint smudges and protect against scratches. Includes 3 per package.

Keep your compatible outdoor device in view as you drive with this portable dashboard mount. Includes friction mount with integrated speaker and power cable.

One of five main components of your GHP ™ 12 Autopilot System, the ECU connects and powers the course computer unit (CCU) and the hydraulic pump, controlling the pump based on information received from the CCU.

Garmin ECU to CCU Extension Cable with Quarter-turn collar - 5m.

Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice of frequencies.

A 600 W transducer with 8 pins, it has a depth of 900 ft; an operating frequency of 80-130 kHz; a beamwidth of 24/16 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.

Surface mount your compatible GPSMAP device using our bail mount with knobs. The mount tilts for optimum viewing.

Surface mount your compatible GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.

Surface mount your GPSMAP using this bail mount with knobs. The mount tilts for optimum viewing.

Surface mount a compatible ECHOMAP Ultra 2 chartplotter by using this bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows users to quickly seat/unseat the device with ease.

Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease.

Surface mount your compatible GPSMAP device using our bail mount with knobs. The mount tilts for optimum viewing.

Replacement Bail Mount for GPSMAP 4008 Weight: 249 gSize: 31 x 13.5 x 2.5 cm